Datasheet

1. General description
The 74LV393 is a low–voltage Si-gate CMOS device and is pin and function compatible
with 74HC393 and 74HCT393.
The 74LV393 is a dual 4-stage binary ripple counter. Each counter features a clock input
(nCP
), an overriding asynchronous master reset input (nMR) and 4 buffered parallel
outputs (nQ0 to nQ3). The counter advances on the HIGH-to-LOW transition of nCP
. A
HIGH on nMR clears the counter stages and forces the outputs LOW, independent of the
state of nCP
.
2. Features and benefits
 Optimized for low voltage applications: 1.0 V to 3.6 V
 Accepts TTL input levels between V
CC
= 2.7 V and V
CC
= 3.6 V
 Typical V
OLP
(output ground bounce) 0.8 V at V
CC
= 3.3 V, T
amb
= 25 C
 Typical V
OHV
(output V
OH
undershoot) 2 V at V
CC
= 3.3 V, T
amb
= 25 C
 Two 4-bit binary counters with individual clocks
 Divide-by any binary module up to 28 in one package
 Two master resets to clear each 4-bit counter individually
 Complies with JEDEC standard no. 7A
 ESD protection:
 HBM JESD22-A114F exceeds 2000 V
 MM JESD22-A115-A exceeds 200 V
3. Ordering information
74LV393
Dual 4-bit binary ripple counter
Rev. 4 — 18 September 2014 Product data sheet
Table 1. Ordering information
Type number Package
Temperature range Name Description Version
74LV393N 40 C to +125 C DIP14 plastic dual in-line package; 14 leads (300 mil) SOT27-1
74LV393D 40 C to +125 C SO14 plastic small outline package; 14 leads; body
width 3.9 mm
SOT108-1
74LV393DB 40 C to +125 C SSOP14 plastic shrink small outline package; 14 leads;
body width 5.3 mm
SOT337-1
74LV393PW 40 C to +125 C TSSOP14 plastic thin shrink small outline package; 14
leads; body width 4.4 mm
SOT402-1