Datasheet

ManualsBrandsNXP SEMICONDUCTORS ManualsLogic ICsLogic IC - Gate and converter - configurable Asymmetric XSON 6

1. General description

The 74LVC1G58 provides configurable multiple functions. The output state is determined

by eight patterns of 3-bit input. The user can choose the logic functions AND, OR, NAND,

NOR, XOR, inverter and buffer. All inputs can be connected to V

or GND.

Inputs can be driven from either 3.3 V or 5 V devices. This feature allows the use of this

device in a mixed 3.3 V and 5 V environment.

This device is fully specified for partial power-down applications using I

OFF

. The I

OFF

circuitry disables the output, preventing the damaging backflow current through the device

when it is powered down.

All inputs (A, B and C) are Schmitt trigger inputs. They are capable of transforming slowly

changing input signals into sharply defined, jitter-free output signals.

2. Features and benefits

 Wide supply voltage range from 1.65 V to 5.5 V

 5 V tolerant input/output for interfacing with 5 V logic

 High noise immunity

 Complies with JEDEC standard:

 JESD8-7 (1.65 V to 1.95 V)

 JESD8-5 (2.3 V to 2.7 V)

 JESD8B/JESD36 (2.7 V to 3.6 V).

 ESD protection:

 HBM JESD22-A114F exceeds 2000 V

 MM JESD22-A115-A exceeds 200 V.

 24 mA output drive (V

=3.0V)

 CMOS low power consumption

 Latch-up performance exceeds 250 mA

 Direct interface with TTL levels

 Inputs accept voltages up to 5 V

 Multiple package options

 Specified from 40 C to +85 C and 40 C to +125 C.

74LVC1G58

Low-power configurable multiple function gate

Rev. 8 — 22 April 2014 Product data sheet

Summary of content (21 pages)

PAGE 1
74LVC1G58 Low-power configurable multiple function gate Rev. 8 — 22 April 2014 Product data sheet 1. General description The 74LVC1G58 provides configurable multiple functions. The output state is determined by eight patterns of 3-bit input. The user can choose the logic functions AND, OR, NAND, NOR, XOR, inverter and buffer. All inputs can be connected to VCC or GND. Inputs can be driven from either 3.3 V or 5 V devices. This feature allows the use of this device in a mixed 3.3 V and 5 V environment.
PAGE 2
74LVC1G58 NXP Semiconductors Low-power configurable multiple function gate 3. Ordering information Table 1. Ordering information Type number Package Temperature range Name Description Version 74LVC1G58GW 40 C to +125 C SC-88 plastic surface-mounted package; 6 leads SOT363 74LVC1G58GV 40 C to +125 C TSOP6 plastic surface-mounted package (TSOP6); 6 leads SOT457 74LVC1G58GM 40 C to +125 C XSON6 plastic extremely thin small outline package; no leads; 6 terminals; body 1  1.
PAGE 3
74LVC1G58 NXP Semiconductors Low-power configurable multiple function gate 6. Pinning information 6.1 Pinning 74LVC1G58 74LVC1G58 B 1 6 C GND 2 5 VCC B 1 6 C GND 2 5 VCC A A 3 4 Y 4 B 1 6 C GND 2 5 VCC A 3 4 Y Y 001aab731 001aaf956 Transparent top view 001aab686 Fig 2. 3 74LVC1G58 Pin configuration SOT363 and SOT457 Fig 3. Pin configuration SOT886 Transparent top view Fig 4. Pin configuration SOT891, SOT1115 and SOT1202 6.2 Pin description Table 3.
PAGE 4
74LVC1G58 NXP Semiconductors Low-power configurable multiple function gate 7.1 Logic configurations Table 5.
PAGE 5
74LVC1G58 NXP Semiconductors Low-power configurable multiple function gate VCC B B Y 1 6 2 5 3 4 Y 001aab694 Fig 11. Inverter 8. Limiting values Table 6. Limiting values In accordance with the Absolute Maximum Rating System (IEC 60134). Voltages are referenced to GND (ground = 0 V). Symbol Parameter VCC supply voltage IIK input clamping current VI input voltage IOK output clamping current output voltage VO Conditions VI < 0 V [1] Min Max Unit 0.5 +6.5 V 50 - mA 0.
PAGE 6
74LVC1G58 NXP Semiconductors Low-power configurable multiple function gate 10. Static characteristics Table 8. Static characteristics At recommended operating conditions; voltages are referenced to GND (ground = 0 V). Symbol Parameter Min Typ[1] Max Unit IO = 100 A; VCC = 1.65 V to 5.5 V - - 0.1 V IO = 4 mA; VCC = 1.65 V - - 0.45 V IO = 8 mA; VCC = 2.3 V - - 0.3 V Conditions Tamb = 40 C to +85 C VOL VOH LOW-level output voltage VI = VT+ or VT IO = 12 mA; VCC = 2.
PAGE 7
4LVC1G58 NXP Semiconductors Low-power configurable multiple function gate Table 8. Static characteristics …continued At recommended operating conditions; voltages are referenced to GND (ground = 0 V). Min Typ[1] Max Unit power-off leakage current VI or VO = 5.5 V; VCC = 0 V - - 200 A ICC supply current VI = 5.5 V or GND; VCC = 1.65 V to 5.5 V; IO = 0 A - - 200 A ICC additional supply current VI = VCC  0.6 V; IO = 0 A; VCC = 2.3 V to 5.
PAGE 8
74LVC1G58 NXP Semiconductors Low-power configurable multiple function gate 12. Waveforms VI A, B, C input VM VM GND t PHL t PLH VOH VM Y output VM VOL t PLH t PHL VOH Y output VM VOL VM 001aab593 Measurement points are given in Table 10. VOL and VOH are typical output voltage levels that occur with the output load. Fig 12. Input A, B, C to output Y propagation delay times Table 10. Measurement points Supply voltage Input Output VCC VM VM 1.65 V to 1.95 V 0.5  VCC 0.5  VCC 2.
PAGE 9
74LVC1G58 NXP Semiconductors Low-power configurable multiple function gate VEXT VCC VI RL VO G DUT RT RL CL mna616 Test data is given in Table 11. Definitions for test circuit: RL = Load resistance. CL = Load capacitance including jig and probe capacitance. RT = Termination resistance should be equal to output impedance Zo of the pulse generator. VEXT = External voltage for measuring switching times. Fig 13. Test circuit for measuring switching times Table 11.
PAGE 10
74LVC1G58 NXP Semiconductors Low-power configurable multiple function gate Table 12. Transfer characteristics …continued At recommended operating conditions; voltages are referenced to GND (ground = 0 V). Symbol Parameter 40 C to +85 C Conditions Typ[1] Min VH [1] hysteresis voltage Max 40 C to +125 C Unit Min Max (VT+  VT); see Figure 14, Figure 15, Figure 16 and Figure 17 VCC = 1.8 V 0.30 0.48 0.62 0.23 0.62 V VCC = 2.3 V 0.40 0.64 0.80 0.34 0.80 V VCC = 3.0 V 0.50 0.
PAGE 11
74LVC1G58 NXP Semiconductors Low-power configurable multiple function gate 001aab594 16 I CC (mA) 12 8 4 0 0 1 2 3 VI (V) Fig 18. Typical 74LVC1G58 transfer characteristics; VCC = 3.0 V 74LVC1G58 Product data sheet All information provided in this document is subject to legal disclaimers. Rev. 8 — 22 April 2014 © NXP Semiconductors N.V. 2014. All rights reserved.
PAGE 12
74LVC1G58 NXP Semiconductors Low-power configurable multiple function gate 15. Package outline Plastic surface-mounted package; 6 leads SOT363 D E B y X A HE 6 5 v M A 4 Q pin 1 index A A1 1 2 e1 3 bp c Lp w M B e detail X 0 1 2 mm scale DIMENSIONS (mm are the original dimensions) UNIT A A1 max bp c D E e e1 HE Lp Q v w y mm 1.1 0.8 0.1 0.30 0.20 0.25 0.10 2.2 1.8 1.35 1.15 1.3 0.65 2.2 2.0 0.45 0.15 0.25 0.15 0.2 0.2 0.
PAGE 13
74LVC1G58 NXP Semiconductors Low-power configurable multiple function gate Plastic surface-mounted package (TSOP6); 6 leads D SOT457 E B y A HE 6 5 X v M A 4 Q pin 1 index A A1 c 1 2 3 Lp bp e w M B detail X 0 1 2 mm scale DIMENSIONS (mm are the original dimensions) UNIT A A1 bp c D E e HE Lp Q v w y mm 1.1 0.9 0.1 0.013 0.40 0.25 0.26 0.10 3.1 2.7 1.7 1.3 0.95 3.0 2.5 0.6 0.2 0.33 0.23 0.2 0.2 0.
PAGE 14
74LVC1G58 NXP Semiconductors Low-power configurable multiple function gate 627 ;621 SODVWLF H[WUHPHO\ WKLQ VPDOO RXWOLQH SDFNDJH QR OHDGV WHUPLQDOV ERG\ [ [ PP E [ / / H H H [ $ $ ' ( WHUPLQDO LQGH[ DUHD PP VFDOH 'LPHQVLRQV PP DUH WKH RULJLQDO GLPHQVLRQV 8QLW PP PD[ QRP PLQ $ $ E ' ( H H / / 1RWHV ,QFOXGLQJ SODWLQJ WKLFNQH
PAGE 15
74LVC1G58 NXP Semiconductors Low-power configurable multiple function gate XSON6: plastic extremely thin small outline package; no leads; 6 terminals; body 1 x 1 x 0.5 mm 1 SOT891 b 3 2 4× (1) L L1 e 6 5 e1 4 e1 6× A (1) A1 D E terminal 1 index area 0 1 2 mm scale DIMENSIONS (mm are the original dimensions) UNIT A max A1 max b D E e e1 L L1 mm 0.5 0.04 0.20 0.12 1.05 0.95 1.05 0.95 0.55 0.35 0.35 0.27 0.40 0.32 Note 1. Can be visible in some manufacturing processes.
PAGE 16
74LVC1G58 NXP Semiconductors Low-power configurable multiple function gate XSON6: extremely thin small outline package; no leads; 6 terminals; body 0.9 x 1.0 x 0.35 mm 1 SOT1115 b 3 2 (4×)(2) L L1 e 6 5 4 e1 e1 (6×)(2) A1 A D E terminal 1 index area 0 0.5 scale Dimensions Unit mm 1 mm A(1) A1 b D E e e1 max 0.35 0.04 0.20 0.95 1.05 nom 0.15 0.90 1.00 0.55 min 0.12 0.85 0.95 0.3 L L1 0.35 0.40 0.30 0.35 0.27 0.32 Note 1. Including plating thickness. 2.
PAGE 17
74LVC1G58 NXP Semiconductors Low-power configurable multiple function gate XSON6: extremely thin small outline package; no leads; 6 terminals; body 1.0 x 1.0 x 0.35 mm 1 SOT1202 b 3 2 (4×)(2) L L1 e 6 5 4 e1 e1 (6×)(2) A1 A D E terminal 1 index area 0 0.5 scale Dimensions Unit mm 1 mm A(1) A1 b D E e e1 L L1 max 0.35 0.04 0.20 1.05 1.05 0.35 0.40 nom 0.15 1.00 1.00 0.55 0.35 0.30 0.35 min 0.12 0.95 0.95 0.27 0.32 Note 1. Including plating thickness. 2.
PAGE 18
74LVC1G58 NXP Semiconductors Low-power configurable multiple function gate 16. Abbreviations Table 13. Abbreviations Acronym Description CMOS Complementary Metal Oxide Semiconductor DUT Device Under Test ESD ElectroStatic Discharge HBM Human Body Model MM Machine Model TTL Transistor-Transistor Logic 17. Revision history Table 14. Revision history Document ID Release date Data sheet status Change notice Supersedes 74LVC1G58 v.8 20140422 Product data sheet - 74LVC1G58 v.
PAGE 19
74LVC1G58 NXP Semiconductors Low-power configurable multiple function gate 18. Legal information 18.1 Data sheet status Document status[1][2] Product status[3] Definition Objective [short] data sheet Development This document contains data from the objective specification for product development. Preliminary [short] data sheet Qualification This document contains data from the preliminary specification. Product [short] data sheet Production This document contains the product specification.
PAGE 20
74LVC1G58 NXP Semiconductors Low-power configurable multiple function gate Export control — This document as well as the item(s) described herein may be subject to export control regulations. Export might require a prior authorization from competent authorities. Non-automotive qualified products — Unless this data sheet expressly states that this specific NXP Semiconductors product is automotive qualified, the product is not suitable for automotive use.
PAGE 21
74LVC1G58 NXP Semiconductors Low-power configurable multiple function gate 20. Contents 1 2 3 4 5 6 6.1 6.2 7 7.1 8 9 10 11 12 13 14 15 16 17 18 18.1 18.2 18.3 18.4 19 20 General description . . . . . . . . . . . . . . . . . . . . . . 1 Features and benefits . . . . . . . . . . . . . . . . . . . . 1 Ordering information . . . . . . . . . . . . . . . . . . . . . 2 Marking . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Functional diagram . . . . . . . . . . . . . . . . . . . . . .