Datasheet

1. Product profile
1.1 General description
The BGU7007 is a Low Noise Amplifier (LNA) for GNSS receiver applications in a plastic
leadless 6-pin, extremely small SOT886 package. The BGU7007 requires only one
external matching inductor and one external decoupling capacitor.
The BGU7007 adapts itself to the changing environment resulting from co-habitation of
different radio systems in modern cellular handsets. It has been designed for low power
consumption and optimal performance when jamming signals from co-existing cellular
transmitters are present. At low jamming power levels it delivers 18.5 dB gain at a noise
figure of 0.85 dB. During high jamming power levels, resulting for example from a cellular
transmit burst, it temporarily increases its bias current to improve sensitivity.
1.2 Features and benefits
 Covers full GNSS L1 band, from 1559 MHz to 1610 MHz
 Noise figure (NF) = 0.85 dB
 Gain 18.5 dB
 High input1 dB compression point P
i
(1dB) of 12 dBm
 High out of band IP3
i
of 4 dBm
 Supply voltage 1.5 V to 3.1 V
 Power-down mode current consumption < 1 A
 Optimized performance at low supply current of 4.8 mA
 Integrated temperature stabilized bias for easy design
 Requires only one input matching inductor and one supply decoupling capacitor
 Input and output DC decoupled
 ESD protection on all pins (HBM > 2 kV)
 Integrated matching for the output
 Small 6-pin leadless package 1 mm  1.45 mm  0.5 mm
 110 GHz transit frequency - SiGe:C technology
BGU7007
SiGe:C Low Noise Amplifier MMIC for GPS, GLONASS, Galileo
and Compass
Rev. 3 — 29 March 2012 Product data sheet
CAUTION
This device is sensitive to ElectroStatic Discharge (ESD). Therefore care should be taken
during transport and handling.