Datasheet

Overview
The Kinetis KE0x family is the entry point into the Kinetis E series and is pin-
compatible across the E series and with the 8-bit S08P family.
This family includes a powerful array of analog, communication, timing and control
peripherals with varying flash memory size and pin count. Additionally, the series
offers highly robust, cost-effective and energy-efficient MCUs that provide the
appropriate entry-level solution. Ultimately, this product group is the next-generation
MCU solution, offering enhanced ESD/EMC performance for cost-sensitive, high-
reliability device applications used in high electrical noise environments.
32-bit Kinetis E Series MCUs
Robust 5 V MCU with 8-bit S08 compatibility
Kinetis KE0x Family
Kinetis KE0x Family Block Diagram
Target Applications
• Appliances
• Analog power
• DC/DC
• DC fans
• Industry
• Metering/PLC
• Offline UPS
64-bit unique
identification (ID)
number
Watchdog
Low-voltage
detection
Cyclic redundancy
check
Serial wire debug
Bit manipulation
engine
Power management
module
Kinetis KE0x Block Diagram
HMI Memory Interfaces
System Core Complex Analog
Clocks
Security Communications
Timers
Up to 2 x SPI
Up to 2 x I
2
C
Up to 1 CAN
Up to 3 x UART
Up to 128 KB Flash
Up to 16 KB RAM
256 B EEPROM
Internal oscillator
Internal reference
clocks
Frequency locked
loop
One 6-channel
FlexTimer/PWM
One Pulse
Width Timer
One 2-channel
periodic
interrupt timer
RTC
ARM
®
Cortex
®
-M0+
Up to 48 MHz
Single-cycle I/O
access port
Single-cycle
32-bit x 32-bit
multiplier
Up to 71 GPIO
1 x 12-bit ADC
2 x analog
comparator
2 x KBI
Up to 8 high-
current pins (20mA)
Up to Two 2-channel
FlexTimer/PWM
Freescale Technology Optional