Network Device User manual ISP1183

NXP Semiconductors
UM10044
ISP1183 Low-Power USB Peripheral Controller PC Eval Kit
4. In dialog box Device Framework Tests, as seen in Fig 5, deselect Perform Remote
Wakeup and select In A Continuous Loop.
5. Click the Start Automated Testing button.
The Full Test Results dialog box appears, as seen in
Fig 6.
6. To stop the loop test, click Stop Testing.
Fig 6. Full Test Results dialog box
The USBCV testing tool can be downloaded from the USB website. Check the website
for the latest version of the tool.
UM10044_4 © NXP B.V. 2007. All rights reserved.
User manual Rev. 04 — 6 February 2007 9 of 18