User's Manual

ManualsBrandsNXP Semiconductors ManualsElectronicsZigBee Modular Transmitter

Table Of Contents

UM11016

ZigBee PRO and IEEE802.15.4 JN5169-001-M0x-2 modules

Rev. 1.0 — 15 June 2016 User manual

Document information

Info Content

Keywords JN5169, Zigbee, module

Abstract JN5169-001-M0x-2 modules user manual

Summary of content (24 pages)

PAGE 1
UM11016 ZigBee PRO and IEEE802.15.4 JN5169-001-M0x-2 modules Rev. 1.
PAGE 2
UM11016 NXP Semiconductors ZigBee PRO and IEEE802.15.4 JN5169-001-M0x-2 modules Revision history Rev Date Description 1.0 20160613 Initial version Contact information For more information, please visit: http://www.nxp.com For sales office addresses, please send an email to: salesaddresses@nxp.com UM11016 User manual All information provided in this document is subject to legal disclaimers. Rev. 1.0 — 15 June 2016 © NXP Semiconductors N.V. 2016. All rights reserved.
PAGE 3
UM11016 NXP Semiconductors ZigBee PRO and IEEE802.15.4 JN5169-001-M0x-2 modules 1. General description The JN5169-001-M0x-2 (with x = 0, 3 or 6) module family provides designers with a ready-made component that provides a fully integrated solution for applications, using the IEEE802.15.4 standard in the 2.4 GHz - 2.5 GHz ISM frequency band, including ZigBee Smart Energy, Home Automation and ZigBee 3.0 and can be quickly and easily included in product designs.
PAGE 4
UM11016 NXP Semiconductors ZigBee PRO and IEEE802.15.4 JN5169-001-M0x-2 modules • • • • Ready to use in products Minimises product development time No RF test required for systems Compliant with: – FCC 47CFR Part 15C – ETSI EN 300-328 V1.9.1 – EN 301-489-17 V2.2.1 – EN60950-1-2006 – ANATEL • Temperature range: 40 C to +85 C • Lead-free and RoHS compliant 2.2 Features: modules • 2.4 GHz IEEE 802.15.
PAGE 5
UM11016 NXP Semiconductors ZigBee PRO and IEEE802.15.4 JN5169-001-M0x-2 modules – TX current 181 mA at 21 dBm – RX current 22.8 mA – 2.0 V/3.6 V operation 2.
PAGE 6
UM11016 NXP Semiconductors ZigBee PRO and IEEE802.15.4 JN5169-001-M0x-2 modules develop and manufacture wireless control or sensing products is to connect a power supply and peripherals such as switches, actuators and sensors, considerably simplifying product development.
PAGE 7
UM11016 NXP Semiconductors ZigBee PRO and IEEE802.15.4 JN5169-001-M0x-2 modules 5.2 JN5169-001-M06-2 JN5169-001-M06-2 NNNNN ZbHYWW FCC ID:XXMJN5169M6V2 IC: 8764A-JN5169M6 Fig 2. Table 3.
PAGE 8
UM11016 NXP Semiconductors ZigBee PRO and IEEE802.15.4 JN5169-001-M0x-2 modules 6. Block diagram integrated antenna external antenna external antenna µFL CONNECTOR WATCHDOG TIMER MATCHING M00-2 option MATCHING 2.4 GHz RADIO INCLUDING DIVERSITY VOLTAGE BROWNOUT PA/LNA 32-BIT RISC CPU 4kB EEPROM MATCHING IEEE802.15.
PAGE 9
UM11016 NXP Semiconductors ZigBee PRO and IEEE802.15.4 JN5169-001-M0x-2 modules 7. Pinning information 7.
PAGE 10
UM11016 NXP Semiconductors ZigBee PRO and IEEE802.15.4 JN5169-001-M0x-2 modules Table 4.
PAGE 11
UM11016 NXP Semiconductors ZigBee PRO and IEEE802.15.4 JN5169-001-M0x-2 modules Table 4.
PAGE 12
UM11016 NXP Semiconductors ZigBee PRO and IEEE802.15.4 JN5169-001-M0x-2 modules Table 4.
PAGE 13
UM11016 NXP Semiconductors ZigBee PRO and IEEE802.15.4 JN5169-001-M0x-2 modules 8.2 Peripherals Table 5.
PAGE 14
UM11016 NXP Semiconductors ZigBee PRO and IEEE802.15.4 JN5169-001-M0x-2 modules Table 6. Limiting values …continued Symbol Parameter Min Max Unit VIO(dig) digital input/output voltage Conditions 0.3 VDDD + 0.3V V Tstg storage temperature 40 +150 C VESD electrostatic discharge voltage 4 - kV according to ETSI EN 301 489-17 2012 V2.2.1 and ETSI EN 301 489-1 2011 V1.9.2 10. Recommended operating conditions Table 7.
PAGE 15
UM11016 NXP Semiconductors ZigBee PRO and IEEE802.15.4 JN5169-001-M0x-2 modules Table 10. Deep sleep mode VDD = 2 V to 3.6 V; Tamb = 40 C to +85 C; unless otherwise specified. Symbol IDD [1] Parameter Conditions supply current deep sleep mode; measured at 25 C [1] Min Typ Max Unit - 70 - nA Waiting on chip RESET or I/O event. 11.2 AC characteristics 11.2.1 Radio transceiver These modules meet all the requirements of the IEEE802.15.4 standard over 2.0 V to 3.
PAGE 16
UM11016 NXP Semiconductors ZigBee PRO and IEEE802.15.4 JN5169-001-M0x-2 modules Table 12. Radio transceiver characteristics: +25 C …continued VDD = 2 V to 3.6 V; unless otherwise specified. Symbol Parameter Conditions output power IDD = 27.2 mA Min Typ Max Unit [1] - 10 - dBm M00 Po Po(cr) IDD = 23.6 mA [1] - 8.5 - dBm control range output power in 6 major steps and then 4 fine steps [2] - 42 - dB output power IDD = 27.2 mA [1] - 10 - dBm IDD = 23.6 mA [1] - 8.
PAGE 17
UM11016 NXP Semiconductors ZigBee PRO and IEEE802.15.4 JN5169-001-M0x-2 modules – User's instructions of the host device must contain the following statements in addition to operation instructions: * “This device complies with part 15 of the FCC Rules.
PAGE 18
UM11016 NXP Semiconductors ZigBee PRO and IEEE802.15.4 JN5169-001-M0x-2 modules The JN5169-001-M03-2 and JN5169-001-M06-2 modules have been designed to operate with antennas having a maximum gain of 2 dBi. Antennas having a gain greater than 2 dBi are strictly prohibited for use with these devices. The required antenna impedance is 50 ohms. The JN5169-001-M00-2 integrates a printed antenna. The maximum gain of the printed antenna is 1 dBi.
PAGE 19
UM11016 NXP Semiconductors ZigBee PRO and IEEE802.15.4 JN5169-001-M0x-2 modules 15. Package outline 16 30 1.27 2.54 2.54 3.30 Thickness: 3.5 mm aaa-022826 Dimensions in mm Fig 6. Package outline JN5169-001-M00-2 16 10.85 2.53 1.27 21 2.54 2.54 3.30 Thickness: 3.5 mm Dimensions in mm Fig 7. UM11016 User manual aaa-022827 Package outline JN5169-001-M03-2 All information provided in this document is subject to legal disclaimers. Rev. 1.0 — 15 June 2016 © NXP Semiconductors N.V. 2016.
PAGE 20
UM11016 NXP Semiconductors ZigBee PRO and IEEE802.15.4 JN5169-001-M0x-2 modules 16 8 2.81 30 1.27 2.54 2.54 3.30 Thickness: 3.5 mm Dimensions in mm Fig 8. UM11016 User manual aaa-022828 Package outline JN5169-001-M06-2 All information provided in this document is subject to legal disclaimers. Rev. 1.0 — 15 June 2016 © NXP Semiconductors N.V. 2016. All rights reserved.
PAGE 21
UM11016 NXP Semiconductors ZigBee PRO and IEEE802.15.4 JN5169-001-M0x-2 modules 16. Abbreviations Table 13.
PAGE 22
UM11016 NXP Semiconductors ZigBee PRO and IEEE802.15.4 JN5169-001-M0x-2 modules 18. Legal information 18.1 Definitions Draft — The document is a draft version only. The content is still under internal review and subject to formal approval, which may result in modifications or additions. NXP Semiconductors does not give any representations or warranties as to the accuracy or completeness of information included herein and shall have no liability for the consequences of use of such information. 18.
PAGE 23
UM11016 NXP Semiconductors ZigBee PRO and IEEE802.15.4 JN5169-001-M0x-2 modules 19. Tables Table 1. Table 2. Table 3. Table 4. Table 5. Table 6. Table 7. Variants and identifications information . . . . . . .3 Marking code . . . . . . . . . . . . . . . . . . . . . . . . . . .6 Marking code . . . . . . . . . . . . . . . . . . . . . . . . . . .7 Pin description . . . . . . . . . . . . . . . . . . . . . . . . . .9 Peripherals . . . . . . . . . . . . . . . . . . . . . . . . . . .13 Limiting values . . . . .
PAGE 24
UM11016 NXP Semiconductors ZigBee PRO and IEEE802.15.4 JN5169-001-M0x-2 modules 21. Contents 1 1.1 1.2 2 2.1 2.2 2.3 3 4 5 5.1 5.2 6 7 7.1 7.2 8 8.1 8.2 9 10 11 11.1 11.2 11.2.1 12 12.1 13 13.1 14 15 16 17 18 18.1 18.2 18.3 19 20 21 General description . . . . . . . . . . . . . . . . . . . . . . 3 Variants and identifications information . . . . . . 3 Regulatory approvals . . . . . . . . . . . . . . . . . . . . 3 Features and benefits . . . . . . . . . . . . . . . . . . . . 3 Benefits. . . . . . . . . .