User's Manual
Table Of Contents
- 1. General description
- 2. Features and benefits
- 3. Applications
- 4. Overview
- 5. Marking
- 6. Block diagram
- 7. Pinning information
- 8. Functional description
- 9. Limiting values
- 10. Recommended operating conditions
- 11. Characteristics
- 12. Federal Communication Commission Statement
- 13. Industry Canada statement
- 14. Footprint information for reflow soldering
- 15. Package outline
- 16. Abbreviations
- 17. References
- 18. Legal information
- 19. Tables
- 20. Figures
- 21. Contents
UM11016 All information provided in this document is subject to legal disclaimers. © NXP Semiconductors N.V. 2016. All rights reserved.
User manual Rev. 1.0 — 15 June 2016 15 of 24
NXP Semiconductors
UM11016
ZigBee PRO and IEEE802.15.4 JN5169-001-M0x-2 modules
[1] Waiting on chip RESET or I/O event.
11.2 AC characteristics
11.2.1 Radio transceiver
These modules meet all the requirements of the IEEE802.15.4 standard over 2.0 V
to 3.6 V and offers the improved RF characteristics shown in Table 11
. All RF
characteristics are measured single ended.
[1] With external matching inductors and assuming PCB layout.
Table 10. Deep sleep mode
V
DD
= 2 V to 3.6 V; T
amb
=
40
C to +85
C; unless otherwise specified.
Symbol Parameter Conditions Min Typ Max Unit
I
DD
supply current deep sleep mode; measured at 25 C
[1]
-70-nA
Table 11. RF port characteristics
Single-ended; Impedance = 50
[1]
; V
DD
= 2 V to 3.6 V; T
amb
=
40
C to +85
C; unless otherwise specified.
Symbol Parameter Conditions Min Typ Max Unit
f
range
frequency range 2.4 - 2.485 GHz
Table 12. Radio transceiver characteristics: +25 C
V
DD
= 2 V to 3.6 V; unless otherwise specified.
Symbol Parameter Conditions Min Typ Max Unit
Receiver
M00
S
RX
receiver sensitivity nominal for 1 % PER, as per 802.15.4 - 96.5 - dBm
P
i(RX)(max)
maximum receiver input
power
1 % PER, measured as sensitivity; supply
current at 17.8 mA
-10-dBm
1 % PER, measured as sensitivity; supply
current at 16.2 mA
-0-dBm
RSSI
RSSI variation 95 dBm to 10 dBm; available through
UM11016 Integrated Peripherals API
4- +4dB
M03
S
RX
receiver sensitivity nominal for 1 % PER, as per 802.15.4 - 96.5 - dBm
P
i(RX)(max)
maximum receiver input
power
1 % PER, measured as sensitivity; supply
current at 17.8 mA
-10-dBm
1 % PER, measured as sensitivity; supply
current at 16.2 mA
-0-dBm
RSSI
RSSI variation 95 dBm to 10 dBm; available through
UM11016 Integrated Peripherals API
4- +4dB
M06
S
RX
receiver sensitivity nominal for 1 % PER, as per 802.15.4 - 100 - dBm
P
i(RX)(max)
maximum receiver input
power
1 % PER, measured as sensitivity - 5 - dBm
RSSI
RSSI variation 100 dBm to 25 dBm; available through
UM11016 Integrated Peripherals API
4- +4dB
Transmitter