User's Manual
Table Of Contents
- 1. General description
- 2. Features and benefits
- 3. Applications
- 4. Overview
- 5. Marking
- 6. Block diagram
- 7. Pinning information
- 8. Functional description
- 9. Limiting values
- 10. Recommended operating conditions
- 11. Characteristics
- 12. Federal Communication Commission Statement
- 13. Industry Canada statement
- 14. Footprint information for reflow soldering
- 15. Package outline
- 16. Abbreviations
- 17. References
- 18. Legal information
- 19. Tables
- 20. Figures
- 21. Contents
UM11016 All information provided in this document is subject to legal disclaimers. © NXP Semiconductors N.V. 2016. All rights reserved.
User manual Rev. 1.0 — 15 June 2016 9 of 24
NXP Semiconductors
UM11016
ZigBee PRO and IEEE802.15.4 JN5169-001-M0x-2 modules
7. Pinning information
7.1 Pinning
7.2 Pin description
The same basic pin configuration applies for all module designs. However, DIO2 (pin 8) and DIO3 (pin 9) are not available on
the JN5169-001-M06-2.
(1) Multi-function: DIO12/PWM2/CTS0/JTAG_TCK/ADO/SPISMOSI.
(2) Multi-function: DIO13/PWM3/RTS0/JTAG_TMS/ADE/SPISMISO.
(3) Multi-function: DIO14/SIF_CLK/TXD0/TXD1/JTAG_TDO/SPISEL1/SPISSEL.
(4) Multi-function: DIO15/SIF_D/RXD0/RXD1/JTAG_TDI/SPISEL2/SPISCLK.
Fig 4. Pin configuration
10
11
12
13
14
15
16
17
18
DIO4/CTS0/JTAG_TCK/TIM0OUT/PC0
DIO5/RTS0/JTAG_TMS/PWM1/PC1
DIO6/TXD0/JTAG_TDO/PWM2
DIO7/RXD0/JTAG_TDI/PWM3
DIO8/TIM0CK_GT/PC1/PWM4
DIO9/TIM0CAP/32KXTALIN/RXD1/32KIN
DIO10/TIM0OUT/32KXTALOUT
V
DD
GND
1
2
3
4
5
6
7
8
9
27
26
25
24
23
22
21
20
19
VREF/ADC2
DIO17/SPISMISO/SIF_D/COMP1M/PWM4
DIO16/SPISMISO/SIF_CLK/COMP1P
DIO15
(4)
DIO14
(3)
RESET_N
DIO13
(2)
DIO12
(1)
DIO11/PWM1/TXD1
ADC1
DO0/SPICLK/PWM2
DO1/SPIMISO/PWM3
DIO18/SPIMOSI
DIO19/SPISEL0
DIO0/ADO/SPISEL1/ADC3
DIO1/ADE/SPISEL2/ADC4/PC0
DIO2/RFRX/TIM0CK_GT/ADC5
DIO3/RFTX/TIM0CAP/ADC6
Transparent top view
Table 4. Pin description
Symbol Pin Type
[1]
Description
ADC1 1 I ADC1 — ADC input