Datasheet

KMZ60 All information provided in this document is subject to legal disclaimers. © NXP B.V. 2014. All rights reserved.
Product data sheet Rev. 2 — 7 February 2014 16 of 30
NXP Semiconductors
KMZ60
Angle sensor with integrated amplifier
10.7 Phase error
The phase error 
err
is defined as a rotation frequency dependent error due to bandwidth
limitation of the operational amplifiers. V
o(VOUT1)
and V
o(VOUT2)
are retarded by the device
propagation delay, referred to the actual angle direction of the rotating magnetic field
(see Figure 13
). The typical characteristics value can be used for a 1st order
compensation of this error on very high rotations per minute. For low rotational speed
systems this error component is negligible.
TC compensation off
Fig 12. Start-up angle error after calibration with pin TCC_EN connected to ground
T
amb
(°C)
-40 16012040 800
001aan892
0.8
1.2
0.4
1.6
2.0
start-up error
(deg)
0