Datasheet

KMZ60 All information provided in this document is subject to legal disclaimers. © NXP B.V. 2014. All rights reserved.
Product data sheet Rev. 2 — 7 February 2014 18 of 30
NXP Semiconductors
KMZ60
Angle sensor with integrated amplifier
11. Electromagnetic compatibility
11.1 Emission (IEC 61967-4)
EMC tests carried out according to IEC 61967-4, part 4 under typical specification
conditions at V
CC
= 5 V without rotational field excitation. Pin TCC_EN connected to V
CC
or ground.
Direct coupling method: 150 , 6.8 nF, frequency band 150 kHz to 1 GHz
Test severity limit: Class III local with level 10-K
Test ensured on pins: VOUT1, VOUT2, VTEMP, V
CC
and POWERDOWN_EN related to
ground with specified load capacitors
11.2 Immunity (IEC 62132-4)
EMC tests carried out according to IEC 62132-4, under typical specification conditions at
V
CC
= 3.3 V with different constant field orientations. Pin TCC_EN connected to V
CC
or
ground.
Direct power injection: 150 , 6.8 nF, frequency band 150 kHz to 1 GHz
Test severity limit: 12 dBm
Test ensured on pins: VOUT1, VOUT2, VTEMP, V
CC
and POWERDOWN_EN related to
ground with specified load capacitors
The mathematically calculated mechanical angular error can be derived from measured
output signals on pin VOUT1 and pin VOUT2. It will not deviate more than 1.8 degrees
during the EMC immunity test.
The deviation of output voltage V
O(TEMP)
is less than 0.009V
CC
which equals with an
additional error less than 2.5 C.
Fig 14. Temperature behavior of pin VTEMP output
T
amb
(°C)
-40 16012040 800
001aan894
0.4
0.2
0.6
0.8
V
o(VTEMP)
/ V
CC
(V / V)
0
max
min