Datasheet
UM10398 All information provided in this document is subject to legal disclaimers. © NXP B.V. 2014. All rights reserved.
User manual Rev. 12.3 — 10 June 2014 182 of 547
NXP Semiconductors
UM10398
Chapter 11: LPC111x Pin configuration (LPC1100XL series,
PIO0_9/MOSI0/
CT16B0_MAT1
28
[3]
F7
[3]
yes I/O I; PU PIO0_9 — General purpose digital input/output pin.
I/O - MOSI0 — Master Out Slave In for SPI0.
O-CT16B0_MAT1 — Match output 1 for 16-bit timer 0.
SWCLK/PIO0_10/
SCK0/
CT16B0_MAT2
29
[3]
E7
[3]
yes I I; PU SWCLK — Serial wire clock.
I/O - PIO0_10 — General purpose digital input/output pin.
I/O - SCK0 — Serial clock for SPI0.
O-CT16B0_MAT2 — Match output 2 for 16-bit timer 0.
R/PIO0_11/
AD0/CT32B0_MAT3
32
[5]
D8
[5]
yes I I; PU R — Reserved. Configure for an alternate function in
the IOCONFIG block.
I/O - PIO0_11 — General purpose digital input/output pin.
I-AD0 — A/D converter, input 0.
O-CT32B0_MAT3 — Match output 3 for 32-bit timer 0.
PIO1_0 to PIO1_11 I/O Port 1 — Port 1 is a 12-bit I/O port with individual
direction and function controls for each bit. The
operation of port 1 pins depends on the function
selected through the IOCONFIG register block.
R/PIO1_0/
AD1/CT32B1_CAP0
33
[5]
C7
[5]
yes I I; PU R — Reserved. Configure for an alternate function in
the IOCONFIG block.
I/O - PIO1_0 — General purpose digital input/output pin.
I-AD1 — A/D converter, input 1.
I-CT32B1_CAP0 — Capture input 0 for 32-bit timer 1.
R/PIO1_1/
AD2/CT32B1_MAT0
34
[5]
C8
[5]
no O I; PU R — Reserved. Configure for an alternate function in
the IOCONFIG block.
I/O - PIO1_1 — General purpose digital input/output pin.
I-AD2 — A/D converter, input 2.
O-CT32B1_MAT0 — Match output 0 for 32-bit timer 1.
R/PIO1_2/
AD3/CT32B1_MAT1
35
[5]
B7
[5]
no I I; PU R — Reserved. Configure for an alternate function in
the IOCONFIG block.
I/O - PIO1_2 — General purpose digital input/output pin.
I-AD3 — A/D converter, input 3.
O-CT32B1_MAT1 — Match output 1 for 32-bit timer 1.
SWDIO/PIO1_3/
AD4/CT32B1_MAT2
39
[5]
B6
[5]
no I/O I; PU SWDIO — Serial wire debug input/output.
I/O - PIO1_3 — General purpose digital input/output pin.
I-AD4 — A/D converter, input 4.
O-CT32B1_MAT2 — Match output 2 for 32-bit timer 1.
Table 170. LPC1100XL series: LPC1113/14/15 pin description table (LQFP48 and TFBGA48 package)
…continued
Symbol
LQFP48
TFBGA48
Start
logic
input
Type Reset
state
[1]
Description