Datasheet
UM10398 All information provided in this document is subject to legal disclaimers. © NXP B.V. 2014. All rights reserved.
User manual Rev. 12.3 — 10 June 2014 5 of 547
NXP Semiconductors
UM10398
Chapter 1: LPC111x/LPC11Cxx Introductory information
Table 1. LPC111x/LPC11Cxx feature changes
Series Features overview
LPC1100 series
• I2C, SSP, UART, GPIO
• Timers and watch dog timer
• 10-bit ADC
• Flash/SRAM memory
• For a full feature list, see Section 1.2.
LPC1100L series LPC1100 series features plus the following additional features:
• Power profiles with lower power consumption in Active and Sleep modes.
• Internal pull-up resistors pull up pins to full V
DD
level.
• Programmable pseudo open-drain mode for GPIO pins.
• WWDT with clock source lock capability.
• Small packages (TSSOP, SO, DIP, HVQFN)
LPC1100XL
series
LPC1100L series features plus the following new features:
• Flash page erase In-Application Programming (IAP) function.
• Timer, UART, and SSP functions pinned out on additional pins.
• One capture function added for each timer.
• Capture-clear feature on the 16-bit and 32-bit timers for easy pulse-width
measurements.
LPC11C00 series LPC1100 series features plus the following additional features:
• CAN controller.
• On-chip CAN drivers.
• On-chip CAN transceiver (LPC11C2x).
• WDT (not windowed) with clock source lock capability.
LPC11D14
(LPC1100L
series)
LPC1100L series with LCD controller PCF8576D in a dual-chip package.