High-speed UARTs and Bridge ICs Advanced serial-interface solutions
NXP UART applications } General Interface Fastest baud rate: 20 Mbps SC16C85xS UART controller is part of the serial data communication of a system. A UART is used to convert parallel data to serial data, and from serial data to parallel data. } Internet access equipment Routers, high-end modems, remote-access service, modem-access equipment for ISPs.
NXP UARTs NXP, an established leader as a long-term supplier in UARTs, provides innovative solutions to meet the application requirements of today and tomorrow 16C UARTS NXP’s enhanced 16C UARTs are drop-in compatible with industry-standard devices and offer added features without a price premium. The family includes CMOS-based, single- to quad-channel UARTs that support the widest supply voltage range (1.8, 2.5, 3.
NXP industrial UARTs Features Benefits Broad line of single- to eight-channel UARTs Variety of choices for different applications Industrial-grade temperature range (-40 to 85 °C) Rugged performance in extreme conditions Power-down mode Ideal for battery-operated systems Extensive interrupt support Reduced software overhead Automatic RS485 half-duplex control Reduced CPU overhead (multi-drop support) Automatic out-band flow control Avoids loss of data Rx/Tx-independent with respect to speed &
I/O pins 16-bit counter/timer Rx/Tx FIFO counters Rx/Tx FIFO INT trigger Software flow control Intel or Motorola databus interface Power-down mode 125 3/1 Normal 2 1 No 3/1 level No Intel Yes Low power, singleSC28L91 channel version of 1 SC28L92 3.3 or 5V 16/16 1000 or 8/8 SC28L201 Enhanced, faster 1 3.
NXP high-speed 16CxxB UARTs Features Benefits Broad line of single- to quad-channel UARTs One-stop shopping Widest supply voltage range (1.8, 2.5, 3.
SC16C550B SC16C650B SC16C750B 1 1 1 2.5-5.5 V 2.5-5.5 V 2.5-5.5 V 3.0/2.0/1.0/- 3.0/2.0/1.0/- 3.0/2.0/1.0/- 16 32 16 or 64 No Yes No 6 6 6 Four levels/None Four levels/ Four levels Four levels/ None Yes Yes Yes No Yes No No Yes Yes SC16C2550B 2 2.5-5.5 V 5.0/5.0/3.0/- 16 No 6 Four levels/None No No No SC16C2552B 2 2.5-5.5 V 5.0/5.0/3.0/- 16 No 6 Four levels/None No No No SC16C652B 2 2.5-5.5 V 5.0/5.0/3.
UART device Channel Vcc Data rate 5/3.3/2.5/1.8 V (Mbps) Rx/Tx FIFO IrDA Modem pins / channel Rx/Tx FIFO INT trigger RTS/CTS flow control Software Flow control Power-down mode Programmable Sampling rate Package Part number 16C UARTs with Motorola databus interface SC16C850 1 2.5-3.3 V -/5/5/- 128 Yes 6 Programmable Yes Yes Yes No HVQFN32 TFBGA36 SC16C850IBS SC16C850IET SC16C850L 1 1.
UART device Channel Vcc Data rate 5/3.3/2.5/1.8 V (Mbps) Rx/Tx FIFO IrDA Modem pins / channel GPIO pins Rx/Tx FIFO INT trigger RTS/CTS flow control Software Flow control Power-down mode SPI Speed Max (Mbps) Package Part number 16C UART with SPI serial bus interface SC16IS740 1 2.5-3.3 V -/5/3/- 64 Yes 2 0 Programmable Yes Yes Yes 4 TSSOP16 SC16IS740IPW SC16IS750 1 2.5-3.3 V -/5/3/- 64 Yes 6 8 [1] Programmable Yes Yes Yes 4 TSSOP24 SC16IS750IPW SC16IS750 1 2.
Exar competitive cross-reference Exar Description Exar Package NXP Part Number NXP Description ST16C550CJ44-F or IJ44-F Single Channel UART with 16-Byte FIFO PLCC-44 ST16C550CP40 or IP40 Single Channel UART with 16-Byte FIFO PDIP-40 Drop-in SC16C550BIA44 2.5 V-5 V single UART with 16-Byte FIFO Drop-in SC16C550BIN40 ST16C550CQ48-F or IQ48-F Single Channel UART with 16-Byte FIFO TQFP-48 2.5 V-5 V single UART with 16-Byte FIFO Drop-in SC16C550BIB48 2.
NXP Package HARDWARE SOFTWARE CHANGE CHANGE COMMENTS IF NOT DROP-IN REPLACEMENT PLCC44 NO NO DIP40 NO NO LQFP48 NO NO HVQFN32 Pin map not compatible. Software similar to the SC16C650B. XR16L570 has 16-byte FIFO while SC16C650 has 32-byte FIFO. YES YES LQFP48 Pin map compatible.
Exar competitive cross-reference EXAR Part Number Exar Description Exar Package Cross Type NXP Part Number NXP Description XR16V654IV-F High Performance Quad UART with 64-Byte FIFO LQFP-64 Similar Part SC16C754BIBM 2.5 V-5 V quad UART with 64-Byte FIFO XR16L784CV-F or IV-F High Performance 2.97 V to 5.5 V Quad UART with 64-Byte FIFO LQFP-64 Similar Part SC16C754BIB64 2.5 V-5 V quad UART with 64-Byte FIFO XR16L784CV-F or IV-F High Performance 2.97 V to 5.
NXP Package COMMENTS IF NOT DROP-IN REPLACEMENT HARDWARE SOFTWARE CHANGE CHANGE LQFP64 pin map compatible. Automatic hardware flow control enabled differently. SC16C754B does not have DLD (4X, 8X sampling rates), FSTAT (FIFO status) registers NO YES LQFP64 Different pin out. XR16L784 has global interrupt register and SC16C754 does not YES YES LQFP80 Different package and pinout. XR16L784 has 16C550 compatible register while SC28L194 does not.
Software Change? Commnent if not drop-in Hardware Change? PLCC-44 Similar SC16C550B 5 V, 3.3 V and 2.5 V UART with 16-byte FIFO HVQFN-32, PLCC-44, LQFP-48, DIP-40 No Yes TL16C451 Single UART without FIFO and with Parallel Port PLCC-68 No Cross N/A N/A N/A N/A N/A TL16C550C Single UART with 16-Byte FIFO and Auto Flow Control PLCC-44, LQFP-48, TQFP-48 Drop-in SC16C550B 5 V, 3.3 V and 2.
SCC2692 SCC68692 SCC2698B SC26C92 SC28L91 SC28L92 SC28C94 l u u u u u u u u u u u u u l u u u u l l l l l l l u u u u u l u u u l u = Applicable l = Recommended CAMERA PROCESSING EB1 DUAL MEMORY BUSSES MDDI Client MSM6280 Modem QDSP4000 VIDEO u u u u u u u u u u u u u u u u u u u u u u u u u u u u u u u u u u u u u u u u u u u u u u l l u u u u u u u u u u u u u u u l l l u u u u u u
AN10224 SC16C554B/SC16C654B ISA bus hardware interface example AN10249 SC16C752B/SC16C2550B ISA bus hardware interface example u u u l u u l AN10250 Using a Philips 16C UART to implement a simple RS-485 transmitter and receiver node u u u u u u u AN10257 Differences between Philips SC16C devices and Philips low power SC16CxxxB devices l l l l l l l AN10307 UART to Bluetooth interfacing u u u u u u u AN10312 Differences between Philips 4-channel SC16C devices and Philips low p
AN10397 How to use the SC18IM700 to control any I2C-Bus device SC118IM700 SC18IS603 SC18IS602B SC18IS601 SC18IS600 Application notes (Bridges) u AN10452 Interfacing NXP Bridge ICs with microcontroller l l l l AN10462 SPI Programming for NXP Bridge ICs l l l l AN10587 Interfacing NXP Bridge ICs with NXP ARM micro-controller l l l l u u AN10688 SC18IS602 Rev A Errata Differences between NXP industrial UARTs* and NXP SC16CxxxB devices Feature Industrial SC16CxxxB Supply voltage 3.
NXP Bridges NXP bridge ICs are the new generation of serial interface solutions for managing host-to-device communications among wide variety of serial bus interfaces such as I2C, SPI, and UART. Our bridges allow you to simply connect devices that use a different serial bus than your current system. These products operate at low voltages, consume little power, and come in ultra-small packaging. They are ideal for battery-operated applications.
I2C NXP A/D D/A PC SPI EE PROM SPI ASIC CPU I2CFPGA slave MCU MCU to SPI master/GPIO bridges – SC18IS602B Bridge LCD/ LED Sensor These bridges connect to an I C master port of a microcontroller or other host processor and allow you to communicate with SPI slave peripherals. The bridges have an I2C slave interface on one side and an SPI master interface on the other. The bridges can also be used to provide additional GPIO to an I2C master by utilizing unused SPI slave select outputs.
NXP Bridge – Demo Board Kits I2C/SPI slave to UART UART to I2C master SC16IS7xx SC18IM700 Kits include Kits include } Sample code: RS232, RS485, and IrDA } User Manual } Sample code: RS232 and NXP I2C devices } User Manual Key Benefit Key Benefit } Easy interface to I2C/SPI host and IrDA, RS232/RS485, and GPIO devices. } Selectable I2C or SPI-bus interface } Easy interface to UART host and various I2C and GPIO devices.
SPI to I2C master I2C to SPI master SC18IS600 SC18IS602 Kits include Kits include } Sample code: SPI and NXP I2C devices } User Manual } Sample code: I2C and NXP SPI devices } User Manual Key Benefit Key Benefit } Easy interface to SPI host and various I2C and GPIO devices. } On-board I2C EEPROM and I2C LED Dimmer OM6271 } Easy interface to I2C host and SPI and GPIO devices.
Notes 22 Industrial and high-speed 16C UARTs
Notes Industrial and high-speed 16C UARTs 23
NXP UARTs in HVQFN and TFBGA an ideal solution for mobile applications www.nxp.com © 2014 NXP Semiconductors N.V. All rights reserved. Reproduction in whole or in part is prohibited without the prior written consent of the copyright owner. The information presented in this document does not form part of any quotation or contract, is believed to be accurate and reliable and may be changed without notice. No liability will be accepted by the publisher for any consequence of its use.