Datasheet

ManualsBrandsNXP SEMICONDUCTORS ManualsDiodesPESD15VU1UT,215

1. Product proﬁle

1.1 General description

Ultra low capacitance ElectroStatic Discharge (ESD) protection diode in a SOT23

(TO-236AB) small SMD plastic package designed to protect one high-speed data line

from the damage caused by ESD and other transients.

1.2 Features

1.3 Applications

1.4 Quick reference data

[1] Measured from pin 1 to 2

PESDxU1UT series

Ultra low capacitance ESD protection diode in SOT23 package

Rev. 02 — 20 August 2009 Product data sheet

n Unidirectional ESD protection of one line n ESD protection > 23 kV

n Ultra low diode capacitance: C

= 0.6 pF n IEC 61000-4-2; level 4 (ESD)

n Max. peak pulse power: P

up to 200 W n IEC 61000-4-5; (surge)

n Low clamping voltage

n 10/100/1000 Ethernet n Local Area Network (LAN) equipment

n FireWire n Computers and peripherals

n Communication systems n High-speed data lines

Table 1. Quick reference data

Symbol Parameter Conditions Min Typ Max Unit

RWM

reverse stand-off voltage

PESD3V3U1UT - - 3.3 V

PESD5V0U1UT - - 5.0 V

PESD12VU1UT - - 12 V

PESD15VU1UT - - 15 V

PESD24VU1UT - - 24 V

diode capacitance f = 1 MHz; V

=0V

[1]

- 0.6 1.5 pF

Summary of content (13 pages)

PAGE 1
PESDxU1UT series Ultra low capacitance ESD protection diode in SOT23 package Rev. 02 — 20 August 2009 Product data sheet 1. Product profile 1.1 General description Ultra low capacitance ElectroStatic Discharge (ESD) protection diode in a SOT23 (TO-236AB) small SMD plastic package designed to protect one high-speed data line from the damage caused by ESD and other transients. 1.2 Features n n n n Unidirectional ESD protection of one line Ultra low diode capacitance: Cd = 0.6 pF Max.
PAGE 2
PESDxU1UT series NXP Semiconductors Ultra low capacitance ESD protection diode in SOT23 package 2. Pinning information Table 2. Pinning Pin Description Simplified outline 1 cathode ESD protection diode 2 cathode compensation diode 3 common anode Symbol 3 1 3 2 1 2 006aaa441 3. Ordering information Table 3.
PAGE 3
PESDxU1UT series NXP Semiconductors Ultra low capacitance ESD protection diode in SOT23 package 5. Limiting values Table 5. Limiting values In accordance with the Absolute Maximum Rating System (IEC 60134).
PAGE 4
PESDxU1UT series NXP Semiconductors Ultra low capacitance ESD protection diode in SOT23 package Table 6. ESD maximum ratings Symbol Parameter Conditions Min Max Unit PESD3V3U1UT - 30 kV PESD5V0U1UT - 30 kV PESD12VU1UT - 30 kV PESD15VU1UT - 30 kV PESD24VU1UT - 23 kV - 10 kV electrostatic discharge voltage VESD PESDxU1UT IEC 61000-4-2 (contact discharge) HBM MIL-STD-883 [1] Device stressed with ten non-repetitive ESD pulses. [2] Measured from pin 1 to 2 Table 7.
PAGE 5
PESDxU1UT series NXP Semiconductors Ultra low capacitance ESD protection diode in SOT23 package 6. Characteristics Table 8. Characteristics Tamb = 25 °C unless otherwise specified Symbol Parameter VRWM reverse stand-off voltage Conditions Min Typ Max Unit PESD3V3U1UT - - 3.3 V PESD5V0U1UT - - 5.0 V PESD12VU1UT - - 12 V PESD15VU1UT - - 15 V PESD24VU1UT - - 24 V reverse leakage current IRM PESD3V3U1UT VRWM = 3.3 V - 0.25 2 µA PESD5V0U1UT VRWM = 5.0 V - 0.
PAGE 6
PESDxU1UT series NXP Semiconductors Ultra low capacitance ESD protection diode in SOT23 package I 006aaa442 10 IR IR(25˚C) −VCL −VBR −VRWM V − −IRM −IR 1 −IPP 10−1 −100 + P-N −50 0 50 100 150 Tj (°C) 006aaa407 PESD3V3U1UT; PESD5V0U1UT IR is less than 10 nA at 150 °C for: PESD12VU1UT; PESD15VU1UT; PESD24VU1UT Fig 3. V-I characteristics Fig 4.
PAGE 7
PESDxU1UT series NXP Semiconductors Ultra low capacitance ESD protection diode in SOT23 package 7. Application information The PESDxU1UT series is designed for protection of high-speed datalines from damage caused by ESD and surge pulses. PESDxU1UT devices combine an ESD protection diode and an ultra low capacitance compensation diode to ensure an effective device capacitance as low as 0.6 pF. The PESDxU1UT series provides a surge capability of up to 200 W per line for an 8/20 µs waveform.
PAGE 8
PESDxU1UT series NXP Semiconductors Ultra low capacitance ESD protection diode in SOT23 package Circuit board layout and protection device placement Circuit board layout is critical for the suppression of ESD, Electrical Fast Transient (EFT) and surge transients. The following guidelines are recommended: 1. Place the PESDxU1UT as close to the input terminal or connector as possible. 2. The path length between the PESDxU1UT and the protected line should be minimized. 3.
PAGE 9
PESDxU1UT series NXP Semiconductors Ultra low capacitance ESD protection diode in SOT23 package 8. Test information ESD TESTER RZ 450 Ω 4 GHz DIGITAL OSCILLOSCOPE RG 223/U 50 Ω coax 10× ATTENUATOR 50 Ω CZ IEC 61000-4-2 network CZ = 150 pF; RZ = 330 Ω D.U.T.
PAGE 10
PESDxU1UT series NXP Semiconductors Ultra low capacitance ESD protection diode in SOT23 package 9. Package outline 3.0 2.8 1.1 0.9 3 0.45 0.15 2.5 1.4 2.1 1.2 1 2 1.9 0.48 0.38 0.15 0.09 Dimensions in mm Fig 8. 04-11-04 Package outline SOT23 (TO-236AB) 10. Packing information Table 9. Packing methods The -xxx numbers are the last three digits of the 12NC ordering code.
PAGE 11
PESDxU1UT series NXP Semiconductors Ultra low capacitance ESD protection diode in SOT23 package 11. Revision history Table 10. Revision history Document ID Release date Data sheet status Change notice Supersedes PESDXU1UT_SER_2 20090820 Product data sheet - PESDXU1UT_SER_1 Modifications: PESDXU1UT_SER_1 • This data sheet was changed to reflect the new company name NXP Semiconductors, including new legal definitions and disclaimers. No changes were made to the technical content.
PAGE 12
PESDxU1UT series NXP Semiconductors Ultra low capacitance ESD protection diode in SOT23 package 12. Legal information 12.1 Data sheet status Document status[1][2] Product status[3] Definition Objective [short] data sheet Development This document contains data from the objective specification for product development. Preliminary [short] data sheet Qualification This document contains data from the preliminary specification.
PAGE 13
PESDxU1UT series NXP Semiconductors Ultra low capacitance ESD protection diode in SOT23 package 14. Contents 1 1.1 1.2 1.3 1.4 2 3 4 5 6 7 8 9 10 11 12 12.1 12.2 12.3 12.4 13 14 Product profile . . . . . . . . . . . . . . . . . . . . . . . . . . 1 General description. . . . . . . . . . . . . . . . . . . . . . 1 Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 Applications . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 Quick reference data. . . . . . . . . . . . . . . . . .