Datasheet

ManualsBrandsNXP SEMICONDUCTORS ManualsLinear ICsPN5331B3HN/C270,55

1. General description

The PN5331B3HN is a highly integrated transceiver module for contactless

communication at 13.56

MHz based on the 80C51 microcontroller core.

A dedicated ROM code is implemented to handle different RF protocols.

RF protocols

PN5331B3HN supports four main operating modes:

• ISO/IEC 14443A Reader/Writer (incl. MIFARE product family)

• ISO/IEC 14443B Reader/Writer

• FeliCa Reader/Writer

• ISO/IEC 18092, ECMA 340 Peer-to-Peer

The PN5331B3HN hardware implements a demodulator and decoder for signals from

ISO/IEC

14443A compatible cards and transponders. The PN5331B3HN hardware

handles the complete ISO/IEC

14443A framing and error detection and upper layers of

this protocol (i.e. ISO/IEC 14443-4) are implemented in firmware.

The PN5331B3HN supports all MIFARE products (e.g. MIFARE crypto method). It

supports contactless communication using higher transfer speeds up to 848 kbit/s in both

directions.

The PN5331B3HN hardware supports layers 2 and 3 of the ISO/IEC 14443B

Reader/Writer communication scheme, except anticollision. Anticollision is implemented

in firmware as well as upper layers (i.e. ISO/IEC 14443-4).

The PN5331B3HN can demodulate and decode FeliCa coded signals. The PN5331B3HN

handles the FeliCa framing and error detection. It supports contactless communication

using FeliCa Higher transfer speeds up to 424 kbit/s in both directions.

Compliant to ECMA 340 and ISO/IEC 18092 NFCIP-1 Passive and Active communication

modes, the PN5331B3HN/C270 offers the possibility to communicate to another NFCIP-1

compliant device, at transfer speeds up to 424 kbit/s. The PN5331B3HN handles the

complete NFCIP-1 framing and error detection.

Interfaces

The PN5331B3HN supports USB 2.0 full speed interface (bus powered or host powered

mode).

PN5331B3HN has also a master I

C interface enabling the drive of following peripherals:

• An external EEPROM

• A TDA8029 smart card reader

PN5331B3HN

Near Field Communication (NFC) controller

Rev. 01 - 31 December 2008 Product short data sheet

158231 PUBLIC

Summary of content (9 pages)

PAGE 1
PN5331B3HN Near Field Communication (NFC) controller Rev. 01 - 31 December 2008 Product short data sheet 158231 PUBLIC 1. General description The PN5331B3HN is a highly integrated transceiver module for contactless communication at 13.56 MHz based on the 80C51 microcontroller core. A dedicated ROM code is implemented to handle different RF protocols. RF protocols PN5331B3HN supports four main operating modes: • • • • ISO/IEC 14443A Reader/Writer (incl.
PAGE 2
PN5331B3HN NXP Semiconductors Near Field Communication (NFC) controller Standards compliancy PN5331B3HN offers commands in order for applications to be compliant with “Paypass-ISO/IEC 14443 Implementation v1.1” and “EMV Contactless Communication Protocol Specification v2.0”. PN5331B3HN supports RF protocols ISO/IEC 14443A and B such as compliancy with Smart eID standard can be achieved at application level.
PAGE 3
PN5331B3HN NXP Semiconductors Near Field Communication (NFC) controller 3. Quick reference data Table 1. Quick reference data Symbol Parameter VBUS USB supply voltage (USB mode) Conditions Min Typ Max Unit 4.02 5 5.25 V 2.5 3.3 3.6 V 2.5 3.3 3.6 V - 3.6 V supply voltage (non USB mode) VBUS = DVDD DVSS = 0 V TVDD, AVDD, DVDD supply voltage TVDD = AVDD = DVDD PVDD supply voltage for host interface VSS = 0 V 1.
PAGE 4
PN5331B3HN NXP Semiconductors Near Field Communication (NFC) controller 4. Ordering information Table 2. Ordering information Type number PN5331B3HN/C270[1][2] Package Name Description Version HVQFN40 Heatsink Very thin Quad Flat package; 40 pins, plastic, body 6 x 6 x 0.85 mm; leadless; MSL level 2. SOT618-1 [1] 70 refers to the ROM code version described in User Manual. [2] Refer to Section 9.4 “Licenses” 5.
PAGE 5
PN5331B3HN NXP Semiconductors Near Field Communication (NFC) controller 6. Limiting values Table 3. Limiting values In accordance with the Absolute Maximum Rating System (IEC 60134). Symbol Parameter PVDD, SVDD, TVDD, AVDD, DVDD Conditions Min Max Unit supply voltage −0.5 4 V VBUS USB supply voltage −0.5 5.5 V Ptot total power dissipation - 500 mW ISVDD maximum current in SVDD switch - 30 mA VINRX dynamic RX input voltage range −0.
PAGE 6
PN5331B3HN NXP Semiconductors Near Field Communication (NFC) controller 8. Revision history Table 5. Revision history Document ID Release date Data sheet status Change notice Supersedes PN5331B3HN_SDS_N_1 20081231 Product short data sheet - - PN5331B3HN_SDS_N_1 Product short data sheet © NXP B.V. 2009. All rights reserved. Rev.
PAGE 7
PN5331B3HN NXP Semiconductors Near Field Communication (NFC) controller 9. Legal information 9.1 Data sheet status Document status[1][2] Product status[3] Definition Objective [short] data sheet Development This document contains data from the objective specification for product development. Preliminary [short] data sheet Qualification This document contains data from the preliminary specification. Product [short] data sheet Production This document contains the product specification.
PAGE 8
PN5331B3HN NXP Semiconductors Near Field Communication (NFC) controller 10. Contact information For more information, please visit: http://www.nxp.com For sales office addresses, please send an email to: salesaddresses@nxp.com PN5331B3HN_SDS_N_1 Product short data sheet © NXP B.V. 2009. All rights reserved. Rev.
PAGE 9
PN5331B3HN NXP Semiconductors Near Field Communication (NFC) controller 11. Tables Table 1. Table 2. Table 3. Quick reference data . . . . . . . . . . . . . . . . . . . . .3 Ordering information . . . . . . . . . . . . . . . . . . . . .4 Limiting values . . . . . . . . . . . . . . . . . . . . . . . . . .5 Table 4. Table 5. Abbreviations . . . . . . . . . . . . . . . . . . . . . . . . . . 5 Revision history . . . . . . . . . . . . . . . . . . . . . . . . . 6 12. Figures Fig 1. Block diagram . . . . .