Instructions / Assembly

17
TROUBLESHOOTING
PROBLEM POSSIBLE CAUSE CORRECTIVE ACTION
Burner will
not light
Propane cylinder is frosted over
Wait until the propane cylinder warms up and becomes
unfrosted
Clear blockage
Control knob is not in ON position Turn control knob to ON
is low
Gas pressure is low Turn cylinder valve OFF and replace cylinder
Outdoor temperature is less than
40°F and tank is less than 1/4 full
Use a full cylinder
Control knob fully ON
Carbon build-up
Thick Black Smoke
Clean burner screen
Blockage in burner
Remove blockage and clean burner screen inside and
outside.