Technical Specifications

Oatey Co. | 20600 Emerald Parkway, Cleveland, OH 44135 | 800.203.1155 | Oatey.com
Oatey Co. is part of the Oatey family of companies
8/19
DIRECTIONS
Store and use at temperatures between -15°F and 110°F. At
temperatures outside of this range, special care must be taken
to prepare good joints and prevent exposure to solvents. Stir or
shake before using; if jelly-like, don’t use. Do not thin.
1. Cut pipe ends square, chamfer and clean pipe ends.
2. Check dry fit of pipe and fitting. Pipe should easily go 1/3 of
the way into the fitting. If pipe bottoms, it should be snug.
3. Use a suitable applicator at least 1/2 the size of the pipe
diameter. For larger size pipe systems use a natural bristle
brush or roller.
4. Apply thoroughly to inside of the fitting socket and to the
outside surface of the pipe to the depth of the fitting. Apply
a second coat of primer to fitting socket.
5. While primer is still wet use an appropriate solvent cement
for the pipe being joined. Follow application instructions from
cement can.
DO NOT TEST WITH AIR.
PRECAUTIONS
Read all information carefully before using this product.
DANGER!: CAUSES SERIOUS EYE IRRITATION. HARMFUL IF
INHALED. MAY CAUSE DROWSINESS OR DIZZINESS. MAY
CAUSE RESPIRATORY IRRITATION. REPEATED EXPOSURE MAY
CAUSE SKIN DRYNESS OR CRACKING. Long term overexposure
to solvents may cause damage to the brain, nervous system,
reproductive system, respiratory system, mucous membranes,
liver and kidneys. Contains a chemical classied by the US
EPA as a suspected possible carcinogen. KEEP OUT OF REACH
OF CHILDREN.
PRECAUTIONS: Avoid breathing vapors. Use only outdoors or in
a well-ventilated area. Use explosion-proof electrical/ventilating
equipment. Use only non-sparking tools. Take precautionary measures
against static discharge. Wear a NIOSH-approved respirator for organic
solvents. Keep away from heat/sparks/open flames/hot surfaces.
No smoking. Vapors may accumulate in low places and may ignite
explosively. Keep container tightly closed and cool. Wear protective
gloves and eye protection. Wash thoroughly after handling. Do not eat
or drink while using this product.
EMERGENCY/FIRST AID: CALL 1-877-740-5015 FOR INSTRUCTIONS.
IF SWALLOWED: Immediately call a POISON CENTER/doctor. Do NOT
induce vomiting. Rinse mouth. This product may be aspirated into the
lungs and cause chemical pneumonitis, a potentially fatal condition.
If IN EYES: Rinse cautiously with water for several minutes. Remove
contact lenses, if present and easy to do. Continue rinsing. If eye
irritation persists, get medical attention.
If ON SKIN: Rinse skin with water/shower. Take off immediately all
contaminated clothing.
If INHALED: Remove person to fresh air and keep comfortable for
breathing. Call POISON CENTER/doctor if you feel unwell. If medical
advice is needed, have product container or label at hand.
FIRE: Use dry chemical, foam, or carbon dioxide extinguisher. Water
spray may be applied to reduce potential vapors or for cooling. Burning
liquid extinguished with water will _oat and may re-ignite on surface
of water.
SPILLS: Remove all sources of ignition and ventilate area. Personnel
cleaning up the spill should wear appropriate personal protective
equipment, including respirators if vapor concentrations are high. Soak
up spill with absorbent material. Put absorbent material in covered,
labeled metal containers. Dispose of contents/ container in accordance
with local regulations. Store in a well-ventilated space. Store locked up.
CLEAR PRIMER – NSF LISTED
TECHNICAL SPECIFICATION