Product Manual

1212
4
CHAPTER
FOUR
Chapter 4: Maintenance and troubleshooting
4.1 - Cleaning Instructions
Sea growth can collect quickly on the light and this can reduce the performance in just a few weeks. To
prevent the build-up of sea growth, all OceanLED lights have been coated with a specialized Tritonium
coating which makes the surface of the lens a non-stick layer which helps ward o long term barnacle
buildup. Lights should be cleaned with a boat brush or similar biweekly or as needed to keep the lens
of the light clear. Growth varies greatly around the world and maintenance is imperative to the proper
operation and longevity of the product. If heavy fouling occurs, barnacles can be removed from the lens
using a plastic scraper and moderate pressure. This can be done in the water using a plastic scraper. If out
of water, moisten the growth before wiping.
CAUTION: Harsh cleaning solvents will damage the light and Tritonium coating.