Quick Start Guide

Assembly Instructions - Important:

Carefully unpack and identify each component before attempting to assemble. Refer to parts list. Please take care when

assembling the unit and always set the parts on a clean, soft surface. If you require any assistance with assembly, parts or

information on other products, please visit our website: www.ofﬁcestar.net or call or write us.

SDE51

May, 2019

SADIE CHAIR

PAGE 1
May, 2019 SDE51 SADIE CHAIR Assembly Instructions - Important: Carefully unpack and identify each component before attempting to assemble. Refer to parts list. Please take care when assembling the unit and always set the parts on a clean, soft surface. If you require any assistance with assembly, parts or information on other products, please visit our website: www.officestar.net or call or write us.
PAGE 2
1. Do not use this product unless all screws and bolts are securely tightened. 2. Check that all screws and bolts are tight every three months or as needed. 3. Dispose of packing material properly. Do not use plastic cover as head covering. It may cause suffocation. 4. Do not use this product as a stepladder. 5. Use this product for its intended purpose only. 6. FOR INDOOR RESIDENTIAL USE ONLY.
PAGE 3
PARTS (A) Chair Body (1 PC) (B) Front Leg (2 PCS) (C) Rear Leg (2 PCS) HARDWARE LIST NO DRAWING DESCRIPTION QUANTITY 1 Bolt 8 PCS 2 Flat Washer 8 PCS 3 Lock Washer 8 PCS 4 Allen Wrench 1 PC
PAGE 4
STEP 1 (1) (3) (2) (C) (B) (A) (B) (C) TURN TO THE UPRIGHT POSITION, APPLY FIRM PRESSURE TO ALIGN & FULLY TIGHTEN BOLTS USING ALLEN WRENCH (4) STEP 2 IF NEEDED, ADJUST LEVELERS TO LEVEL.