User guide

Charge
Mode
1.MAIN M
ENU -> press the
(ENTER) into charge mode.
2.Set the c
urrent rate before ch
arging. Adjustable charge rates from 300mA-5000mA.
The defau
lt current is 2A, you can use the +(INCREASE) and -(DEC
REASE) button
to adjust th
e charge rate.
See the ta
ble below to select the charge rate for Ni-Cd & Ni-MH bat
tery packs. We
recommen
d that you charge 1800mAh receiver packs at 1.8 amp. (
1C).
It's norma
l situation if the curren
t value of Ni-Cd & Ni-MH turn to zero after period
of chargin
g.
An exhaus
ted
Li-Po battery pack can be fully recharged in approxim
ately 2-3 hours
with charg
e rate at 1C.
To Re-pea
k the pack, simply press the S(START)
button.
Press the
(ENTER) butto
n to show MAX. voltage.
The coolin
g fan will work when
you press the S(START) button to start charging.
Dischar
ge Mode
1.MAIN M
EN
U -> press the (ENTER) and then the +(INCREAS
E) button into
discharg
e mode.
2.The disc
har
ge rate is 0.3A~2.0A (Adjustable).
It's necess
ary
to set discharge bottom voltage of Ni-Cd & Ni-MH, sin
gle cell can't
lower than
0.8V,
6cells can
't lower than 4.8V.
END DISC
HARGE
1.To Re-D
ischarge the pack sim
ply press the S(START) button.
2.Pre
ss th
e (ENTER) button to return MAIN
MENU.
Cycle C
ha
rge Mode (Discharge Charge)
MAIN MEN
U -> press the (ENTER
) and then the +(INCREASE) button
twice into
charge after discharge mode, and then press the S(STAR
T) button
to start.
Befo
re you
get into this mode, you have to set the
charge / discharge rate and the
discharge
voltage
.
A
A
A
B
B
C
B
C
D
E
F
G
H
Battery C
apacity Charge Rate Charge Time
600
mAH 0
.6A 60 ~ 80 Min.
1300
mAH 1A 78 ~ 94 Min.
2
A 54 ~ 65 Min.
3300
mAH 5
A 40 ~ 48 Min.
2