User Manual

OFNA Racing
7 Vanderbilt • Irvine, Ca 92618
Ph: [phone] • Fax: [phone]
DIGIPEAK 2
TM
- Part Number #91850
DC 1-14 CELL MICROPROCESSOR PEAK CHARGER
Discharge
Trickle Charge
Fast Charge
Start / Select
Output Terminal
Capacity/Voltage/Current
Selector Switch
LCD Display
7.5A Fuse
200mA~5A
Current Adjustment Knob
START / SELECT BUTTON:
OPERATION LED CONDITION/BEEP FUNCTION
PUSH ONCE
PUSH TWICE
PUSH THREE TIMES
CONNECT BATTERY WITHOUT PUSH
PUSH ONE MORE TIME AFTER ACTION
RED/BEEP ONCE
ORANGE & RED/BEEP TWICE
ORANGE/BEEP THREE TIMES
GREEN
GREEN
FAST CHARGE
CHARGE AFTER DISCHARGE
DISCHARGE
TRICKLE CHARGE (150mA)
RETURN TO TRICKLE CHARGE
BEEP & LCD DISPLAY
1. The LCD display can indicate capacity (mAH), voltage (Volt), charge current (Amp) and the number of cells (Cell).
2. When the display read Err1, it means that there is a short circuit or the safety fuse is burned out.
3. When the display read Err2, it means that there is a problem with the charging process: such as the contacts and
current are loose or not connected.
4. When the display reads Err6, it means that the PEAK charge is abnormal.
POWER SUPPLY
1. 12V AC switching power supply unit (No. 92135 7amp or No. 92136 18amp).
2. DC 12V sealed battery or an automobile battery (the battery capacity must be over 5A).
FEATURES:
1) Entire aluminum outside case is good for heat dissipation
2) Built-in a DC cooling fan
3) Using high techniques of 0V and –V and 16 bits microchip CPU controller
4) For charging1-14 cells Ni-Cd and Ni-MH batteries