Owner manual

Adventurer Pro Balances
Instruction Manual Supplement for
NTEP Certified Models
OHAUS Corporation
7 Campus Drive
Suite 310
Parsippany, NJ 07054 USA
Tel: [phone]
Fax: [phone]
www.ohaus.com
With offices worldwide
P/N 80103490 C © Ohaus Corporation 2013, all rights reserved.
Printed in USA
Certificate of Conformance 05-118 has been issued by the National Conference on Weights and Measures, confirming
that the Adventurer Pro models listed in this manual conform to the requirements in NCWM Publication 14 and NIST
Handbook 44.
Before this balance can be used in commercial trade, it must be inspected by local weights and measure authorities.
It is the responsibility of the purchaser to ensure that all pertinent legal requirements are met. Please contact your local
weights and measures office for further details.
Item Number AV64N
AV64CN
AV114N
AV114CN
AV264N
AV264CN
AV213N
AV213CN
AV313N
AV313CN
AV413N
AV413CN
AV2102N
AV2102CN
AV3102N
AV3102CN
AV4102N
AV4102CN
Max (g) 65 110 260 210 310 410 2100 3100 4100
Min (g) 0.1 0.1 0.1 0.2 0.2 0.2 5 5 5
d=(g) 0.0001 0.0001 0.0001 0.001 0.001 0.001 0.01 0.01 0.01
e=(g) 0.001 0.001 0.001 0.01 0.01 0.01 0.1 0.1 0.1
Class I I I II II II II II II
Repeatability (g) 0.0001 0.0001 0.0001 0.001 0.001 0.001 0.01 0.01 0.01
Linearity (g)
+0.0002
+0.0002
+0.0003
+0.002
+0.002 +0.002
+0.02
+0.02
+0.02
Weighing Units mg, g, ct, dwt, oz, ozt, GN g, ct, dwt, oz, ozt, lb g, kg, dwt, oz, ozt, lb
Application Modes Weighing, Animal Weighing, Parts Counting, Percent Weighing, Check Weighing, Totalize
Tare Range To capacity by subtraction
Stabilization Time 3
Power Requirements AC Adapter (included)
Calibration Digital with external weight
Display Type 2-line LCD with Backlight
Display Size (mm / in) 100 x 25 / 4 x 1
Pan Size (mm / in) 90 / 3.5 120 / 4.7 168 x 180 / 6.6 x 7.1
Dimensions WxDxH
(mm / in)
220 x 300 x 300
8.7 x 12 x 11.8
220 x 190 x 300
8.7 x 7.5 x 11.8
220 x 85 x 300
8.7 x 3.3 x 11.8
Net Weight (kg / lb) 4.0 / 8.7 3.3 / 7.3 2.8 / 6.1
Net Weight (with InCal)
(kg / lb)
4.4 / 9.6 3.7 / 8.2 3.2 / 6.9
AV...CN models are equipped with internal calibration.
Introduction
This document is a supplement to the Instruction Manual provided with the Adventurer Pro balance. It is intended to
provide information specific to the NTEP Certified models. For all other information, refer to the Instruction Manual.
Setting the Balance
Press and hold the Menu-Cal button until MENU is displayed. Move to the Setup Sub-menu using the No button.
When SETUP is displayed, press the Yes button to enter the Setup Sub-menu. When LEGAL TRADE is displayed,
press the Yes button to view the setting OFF. Press the Yes button to change the setting to NTEP. Press the Yes but-
ton to store the setting. Press the Exit button to return to the current weighing mode.
Note: Before setting the balance, enter the Menu to perform a calibration and make any desired balance setting
adjustments. Once the balance is set, the following conditions apply:
 • TheCalibrateSub-menuishiddenandnotavailable.
 • IntheSetupSub-menu,theLegalTrademenuitemislocked.
 • IntheSetupSub-menu,theAutoZero(AZSM)menuitemissetto0.5dandlocked.
 • IntheReadoutSub-menu,theGrossIndicatormenuitemsettingislocked.
 • TheModeSub-menuislocked.
 • IntheUnitSub-menu,theUnitmenuitemsarerestrictedtoSystemsInternationalunits.
 • InthePrintSub-menu,theOutputWhenStablemenuitemissettoONandlocked.
 • InthePrintSub-menu,theContinuoussettingintheAutoPrintmenuitemishiddenandnotavailable.
 • IntheResetSub-menu,theResetReadout,ResetMode,ResetUnitandResetGlobalmenuitemsare 
locked.
 • IntheLockoutSub-menu,theCalibrationmenuitemislocked.
To regain access to the locked Menu settings, turn the balance off. Turn the balance on and press the Lock Switch
while OHAUS is displayed during power up.
Sealing the Balance
To seal the balance, cover the Lock Switch access hole by sliding the Security Cover to the right. Then install a
wire through the holes in the tabs of the Security cover and Top Housing.
Security Cover
Wire Seal
*80103490*