Instructions / Assembly

Ohio Steel Ind., Columbus, OH 43224 U.S.A.

Visit our website: www.ohiosteel.com

For missing parts or questions call 1-800-652-2321

If this product fails due to a defect in material or workmanship within one year from the date of purchase,

Ohio Steel Industries will at its option repair or replace it free of charge.

Proof of purchase required

for

all

warranty claims.

This warranty does not cover:

Repairs necessary because of operator abuse or negligence.

•

Equipment used for commercial or rental purposes.

•

Contact Ohio Steel Industries to arrange for product repair, or return this product to place of purchase for

replacement.

This warranty gives you specific legal rights, and you may also have other rights which may vary from state

to state.This warranty applies only while this product is in use in the United States.

When ordering repair parts always give the following information,

PRODUCT NAME, MODEL NUMBER, PART NUMBER, and PART DESCRIPTION.

LIMITED ONE-YEAR WARRANTY

Assembly

Step 1. Attach support bars (3) to ramp top (1) with bolts (9), flat washers (10), lock washers (11), and

hex nuts (12).

Step 2. Invert ramp bottom (2) so that flanges face up. Place ramp top (1) inside the ramp bottom so that the side

holes of each are in line.

Step 3. Secure both side by inserting 1/2" hex bolt (6) through 1/2" flat washer (7), ramp bottom, ramp top, another

flat washer (7) and tighten with lock nut (8) as shown. NOTE: DO NOT OVER TIGHTEN. Ramp must be

able to swivel open and shut.

1084C Rev A

2008_05