Copier Installation Guide

ManualsBrandsOki ManualsAll in One PrinterES3640 MFP

ES3640e MFP Software Installation Guide

About this Guide

This guide describes the initial printer driver

installation. For more detailed information, refer to

the EFI User Software Installation Guide and EFI

Configuration Guide provided on the User

Documentation CD (CD3).

The general steps for installing the software are as

follows:

• Install the PostScript or PCL printer driver and

corresponding printer driver files.

• Set up the printer driver to communicate with

the Fiery.

• Install Fiery utilities and user software.

• Configure Fiery utilities and user software.

You must also configure either a local connection

for printing directly to your printer or a network

connection for printing over a network.

Service and Support

• Consult the dealer where you purchased your

system.

•Visit our web site: http://my.okidata.com

NOTE

A full set of user documentation, where

procedures are described in detail, is provided on

the User Documentation CD (CD3).

Windows

TCP/IP Network Installation ..... 2

Novell Installation ...................................... 7

Macintosh

Installation .............................. 8

OS 9.1 to 9.2.x.......................................8

OS X.1+ to X.3+................................... 10

Summary of content (12 pages)

PAGE 1
ES3640e MFP Software Installation Guide Windows® TCP/IP Network Installation ..... 2 About this Guide Novell Installation ...................................... 7 This guide describes the initial printer driver installation. For more detailed information, refer to the EFI User Software Installation Guide and EFI Configuration Guide provided on the User Documentation CD (CD3). Macintosh® Installation .............................. 8 OS 9.1 to 9.2.x ....................................... 8 OS X.1+ to X.
PAGE 2
Windows TCP/IP Network Installation Selecting a printer driver Select a driver appropriate for your application. NOTE For the most recent printer driver version, see our web site: http://my.okidata.com Fiery PostScript printer driver Use this driver for high-resolution color graphics applications and pre-press graphic proofing. This driver also includes advanced features which may only be used by a network system administrator.
PAGE 3
Windows TCP/IP Network Installation (cont’d) 14. Select Yes and press ENTER to Save Changes. Press ENTER to Exit the Setup Menu. 1 Assign an IP address to the MFP If you are not using DHCP, you need to obtain an IP Address from your network Administrator and enter it using the front panel: 15. Printer restarts the server and initializes. Ready to Print displays. 1. Confirm that the printer displays [Ready to print]. 2. Press ∇ key until [Admin Setup] appears. Press ENTER. 3. Continue to Setup? displays.
PAGE 4
Windows TCP/IP Network Installation (cont’d) 2 Install the Fiery PostScript Printer Driver NOTE In order to send documents to the MFP, the LPR utility must be installed. LPR installs automatically when the drivers are installed using the Menu Installer as instructed here. If drivers are installed using Windows Add Printer Wizard, you must manually load the LPR Utility from the Menu Installer on CD1. To do this, click Custom Install /Network Software/ InstallationConfig/OKI LPR. 1.
PAGE 5
Windows TCP/IP Network Installation (cont’d) 4 Install the EFI Fiery Utilities 5 Activating Options 1. Insert the EFI Utilities CD (CD2) into your CD-ROM drive. After you have completed the printer driver installation, you must configure the MFP for the installed options. You can configure the options manually or, for TCP/IP network connections, you can use the Two-Way Communication feature to configure the options automatically. 2. Select your language. 3. Click Next to accept the License Agreement.
PAGE 6
Windows TCP/IP Network Installation (cont’d) 6 Install the User Documentation 3. Click Properties. 1. Insert the User Documentation CD (CD3) into your CD-ROM drive. The CD will autorun. 4. Click the Installable Options tab. 5. Select Two-Way Communications. If it doesn’t, click Start → Run → Browse. Browse to your CD-ROM drive. Double-click Install.exe. Click OK. 2. Follow the on-screen instructions. 6. Type the Fiery IP address or DNS name. 7.
PAGE 7
Windows Network Installation Novell 1 Install the Utility 2 Install the MFP on a Novell® Network This utility installs, configures, and manages Oki network print server devices. Novell Client for Windows must be loaded, the Admin Manager software must be running, and you must be logged in to NDS. 1. Insert the printer driver CD (CD1) into your CD-ROM drive. The CD will autorun. 1. Run Discover. If it doesn’t autorun, click Start → Run → Browse. Browse to your CD-ROM drive. Double-click Install.exe.
PAGE 8
Macintosh® Installation OS 9.1 to 9.2.x 1 Install the Driver 2. Select the LaserWriter8 icon and highlight the printer name (print server ID#). 1. Turn the MFP ON, then turn the computer ON. 3. Click Create. 2. Insert the printer driver CD (CD1) into your CD-ROM drive. 4. Select OKI ES3640e MFP PPD. Click Select. 5. Close Chooser. 3. Double-click the OKI CD icon that appears on the desktop. 4. Double-click the MAC icon. 3 Create the Desktop Printer for USB 5. Double-click Installer for MAC OS 9. 1.
PAGE 9
Macintosh® Installation OS 9.1 to 9.2.x (cont’d) 4 Install the EFI Fiery Utilities 5 Install the User Documentation 1. Place EFI Utilities CD (CD2) in the CD-ROM drive. For additional information on using MFP features as well as MFP utilities, see the on-line documentation. 2. Double-click the OKI CD icon that appears on the desktop. 3. Double-click the MAC icon. Requirements • Microsoft Internet Explorer version 4.0 or higher and Acrobat Reader. 4. Double-click User Software.
PAGE 10
Macintosh® Installation OS X.1+ to X.3+ 1 Install the Driver and Utilities 3 Install the EFI Fiery Utilities 1. Turn the MFP ON, then turn the computer ON. 1. Place CD2 in the CD-ROM drive. 2. Place the CD supplied with the MFP in the CD-ROM drive. 2. Double-click the OKI CD icon that appears on the desktop. 3. Double-click the OKI CD icon that appears on the desktop. 3. Double-click the MAC icon. 4. Double-click User Software. 4. Double-click the MAC icon. 5.
PAGE 11
Macintosh® Installation OS X.1+ to X.3+ (cont’d) 4 Install the User Documentation For additional information on using MFP features as well as MFP utilities, see the on-line documentation. Requirements • Microsoft Internet Explorer version 4.0 or higher and Acrobat Reader. To Load In order to open the on-line documentation, you must have Acrobat Reader installed. 1. Insert the User Documentation CD (CD3) into your CD-ROM drive. 2. From the CD contents folder, drag the Manual folder to the desktop.
PAGE 12
Trademarks OKI is a registered trademark of Oki Electric Industry Company, Ltd. Microsoft, Internet Explorer and Windows are either registered trademarks or trademarks of Microsoft Corporation in the United States and other countries. Microsoft, MS-DOS and Windows are registered trademarks of Microsoft Corporation. Apple, Macintosh, Mac and Mac OS are registered trademarks of Apple Computer. Other product names and brand names are registered trademarks or trademarks of their proprietors.