OKIFAX User's Guide

Statutory User Information (UK only)

The OKIFAX 740 is approved for connection to

telecommunications systems specified in the instructions

for use subject to the conditions set out in them. The BABT

approval number for the OKIFAX 740 is:

The OKIFAX 740 has a REN (ringer equivalence number)

value of 1. The REN is a customer guide indicating the

maximum number of apparatus that should be

simultaneously connected to the line. The total REN values

of each of the items of apparatus must not exceed a REN

value of 4. This value includes a telephone which, unless

otherwise stated, has a REN value of 1.

This apparatus has been approved for the use of the

following facilities:

• manual call initiation

• operation in the absence of proceed indication

• auto answer

• modem

• series connection

• simple telephone

Any other usage will invalidate the approval of the apparatus

if as a result it ceases to conform to the standards against

which the approval was granted.

Interconnection circuits should be such that this equipment

continues to comply with the requirements of 4.2 of EN

41003 for TNV circuits and 2.3 of EN60950 for SELV

circuits after making connections between circuits.

Interconnection points ‘Line/TEL1/TEL2’ are for

connection to TNV circuits, and the ‘Power Inlet Socket’

is for connection to a 220-240VAC, 50/60Hz supply.

The apparatus has been approved for connection to the

public switched telephone network provided by British

Telecommunications Plc, Kingston Communications Plc,

or Mercury Communications Ltd.

The OKIFAX 740 may be connected to any direct PSTN

exchange line except as an extension to a payphone. The

exchange line must provide facilities for either loop-

disconnect or multi-frequency (MF) dialling.