Operation Manual
ENGLISH
EN - 34
b. Press the “TEMP” keys (4) to select the desired time.
Forward
Backward
Every time one of the “TEMP” keys (4) is pressed, the time moves forward or backward by 30 minutes,
depending on the direction of pressing.
c. Once the time has been set for TIMER ON and TIMER OFF, check that the TIMER indicator on the indoor
unit display is on.
MODIFICATIONS
Repeat phases “a”, “b” and “c” to change the settings.
When the unit has been switched on, select the operational mode, the desired temperature and fan speed
with which the unit will activate on scheduled switch-on.
Successively put the machine in Stand-By.
Press the “TIMER ON” key (7) to set the desired delay (from 1 to 24 hours), after which the unit will switch
If no key is pressed within 5 seconds, the timer setting function ends automatically.
The remote control displays the countdown until switch-on.
Once the time set has expired, the unit starts with the last settings selected.
With the unit in any operational mode, press the “TIMER OFF” key (8) to set the desired delay (from 1 to 24
If no key is pressed within 5 seconds, the timer setting function ends automatically.
The remote control displays the countdown until switch-off.
Once the time set has passed, the unit switches off.
3.7.3 - Setting combined timer
(Simultaneous setting of the ON and OFF timers)
(On => Stop => Start functioning)
This function is useful if the air conditioner is to be switched off after going to bed and switched back on in
the morning or when returning home.
The time is 20:00. If the air conditioner is to be switched off at 23:00 and switched back on at 06:00.
a. Press the “TIMER OFF” key (8) to display “TIMER OFF”.
b. Press the “TEMP” keys (4) until the value “3:00” is set near to the “TIMER OFF” indicator.
c. Press the “TIMER ON” key (7) to display “TIMER ON”.
d. Press the “TEMP” keys (4) until the value “10:00” is set near to the “TIMER ON” indicator.
e.