Instructions / Assembly
10
Fig. 13
OFF
ON
Connecting the Tank
I. Attach Tank Ball Valve: See Fig. 13. Apply 3-5 wraps of the provided Teon tape to the
threaded output stem on the top of the tank. Screw the provided tank ball valve onto
the tank output stem.
II. Connect Tank Line to Tank: See Fig. 14. Ensure that tank ball valve is in the OFF posi-
tion. Insert one end of the YELLOW tubing into the tank ball valve and attach a provid-
ed BLUE tubing lock clip to secure tubing connection.
III. Connect Tank Line to System: See Fig. 15. Locate the YELLOW cap insert attached to
the right side of the Stage 5 post carbon lter on the main system bracket. Remove
BLUE tubing lock clip and YELLOW cap insert on the post carbon lter. Insert one end
of the YELLOW tubing and re-attach the BLUE tubing lock clip to secure tubing con-
nection.
Fig. 14
Fig. 15