Instructions / Assembly

Remove the provided RO membrane from the plastic packaging and install into the RO hous-

ing on the main system bracket as follows:

I. Open RO Housing: See Fig. 4. Remove BLUE tubing lock clip and remove the tubing

from the cap of the RO housing on the main system bracket.** Using the provided

small wrench, remove the RO housing cap by turning counter-clockwise.

II. Install RO Membrane in Housing: See Fig. 5. Insert the double banded end of the RO

membrane into the RO housing rst.

III. Close RO Housing: Hand twist the RO housing cap back onto the RO housing by turn-

ing clockwise. Using the provided small wrench, completely tighten the cap onto the

RO housing. See Fig. 6. Re-insert tubing into RO housing cap and re-attach BLUE tub-

ing lock clip to secure tubing.

Fig. 4

Fig. 5

Fig. 6

**Important!

The tubing connection on the membrane housing cap MUST be removed prior to opening the membrane housing to pre-

vent the tubing connection elbow from breaking and/or cracking inside the housing cap.

RO Membrane Installation

Important!

Step 1: Remove Tubing