User manual

14
G
Transmitter unit
16 Loudspeaker
17 Operating indicator
18 Night light
19 button (switch on/off)
20
button (paging)
21 Antenna
22 Power adapter socket
23 Battery compartment
24 Screw for battery compartment cover
Putting the receiver unit into operation
Inserting batteries in the receiver unit
 Slide the battery compartment cover on the rear downwards
and remove it.
 Insert the batteries in the battery compartment, paying
attention to correct polarity.
 Close the battery compartment cover.
Charging the batteries
 Connect the power adapter plug to the power adapter socket [15]
on the receiver and a properly installed mains power outlet and insert
the receiver unit in the charger.
The batteries must be charged for at least 8 hours before being used for the first time.
Switching the receiver unit on/off
 5 sec.  [4]  Receiver unit is switched on.
 5 sec. 
[4]  Receiver unit is switched off.
Operating and charging indicators on the receiver unit
Operating/Charging indicator [2] lights up  The receiver unit is switched on.
Operating/Charging indicator [2] flashes  Batteries are being charged.
20
16
19
24 23
17
22
18
21