User manual
17
G
Setting the volume
[6] Raise the volume.
[8] Lower the volume.
Setting the feed alert/time
You can set a feed alert/time to be sounded at a specific time or at specific intervals.
If you set a feed alert/time to be issued at intervals, ensure that the date and time are set correctly.
Setting the feed time
Example: 12.30 p.m.
[9] Feedtime SetTime Hour/Minute Define the setting (12.30).
[5]
Setting the feed alert at an interval
Example: 2 hours 30 minutes
[9] Feedtime SetTime SetInterval Define the settings (2 hours 30 minutes).
[5]
Activating the feed alert at intervals
[9] Feedtime SetInterval On? Feed alert is activated.
Deactivating the feed alert at intervals
[9] Feedtime SetInterval Off? Feed alert is deactivated.
Setting the volume of the feed alert
[9] Feedtime SetInterval High/Low
The feed alert can be stopped by pressing any button on the receiver unit.
Paging
If you have misplaced the receiver unit and cannot find it, simply use the Paging function. The receiver unit
then issues a loud acoustic signal.
On the transmitter unit
5 sec.
[20] The receiver unit issues a loud acoustic signal.
The acoustic signal can be stopped by pressing any button on the receiver unit.
Voice activation
The voice activation facility (Vox function) is activated by default. As soon as the transmitter unit registers
acoustic signals, they are transmitted to the receiver unit.