basic_e_po166_6.
basic_e_po166_6.fm Page 2 Friday, March 7, 2003 5:24 PM CONTENTS/TABLE DES MATIÈRES/INHALT/CONTENIDO ENGLISH . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 FRANÇAIS. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44 DEUTSCH . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 86 ESPAÑOL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 128 CONTENTS GETTING STARTED . . . . . . . . . . . . . . . . . . . . . . . . .
basic_e_po166_6.fm Page 3 Wednesday, March 5, 2003 4:44 PM Before using your camera, read this manual carefully to ensure correct use. We recommend that you take test shots to get accustomed to your camera before taking important photographs. J These instructions are only a basic manual. For more details on the functions described here, refer to the Reference Manual on the CD-ROM.
basic_e_po166_6.
basic_e_po166_6.
basic_e_po166_6.fm Page 6 Wednesday, March 5, 2003 4:44 PM J VIEWFINDER AND MONITOR INDICATIONS Shooting mode F2.8 F2.8 SQ1 1600 1200 Still picture En Movie Item Indications P, A, S, M, N, o, m, L, K, J, I, s 1 Shooting modes 2 Shutter speed 16 – 1/1000 3 Aperture value F2.8 – F8.0 4 Exposure compensation Exposure differential -2.0 – +2.0 -3.0 – +3.
basic_e_po166_6.fm Page 7 Wednesday, March 5, 2003 4:44 PM Item Indications 12 Drive o, j, i, k, BKT 13 Self-timer Remote control Y < 14 Sound record R 15 Record mode TIFF, SHQ, HQ, SQ1, SQ2 16 Resolution 2288 × 1712, 1280 × 960, 640 × 480, 320 × 240 etc.
basic_e_po166_6.fm Page 8 Wednesday, March 5, 2003 4:44 PM Playback mode SQ1 1600 1200 Still picture Movie Item En Indications 1 Battery check e, f 2 Print reservation, Number of prints Movie < × 10 3 Sound record H 4 Protect 9 5 Record mode TIFF, SHQ, HQ, SQ1, SQ2 6 Resolution 2288 × 1712, 1280 × 960, 640 × 480, 320 × 240 etc. 7 Aperture value F2.8 – F8.0 8 Shutter speed 16 – 1/1000 9 Exposure compensation -2.0 – +2.
basic_e_po166_6.fm Page 9 Wednesday, March 5, 2003 4:44 PM Memory gauge The memory gauge lights up when you take a still picture. While the gauge is lit, the camera is storing the picture on the card. The memory gauge indication changes as shown below depending on the shooting status. The indication is not displayed during movie recording. Battery check indication F2.
basic_e_po166_6.fm Page 10 Wednesday, March 5, 2003 4:44 PM J ATTACHING THE STRAP AND LENS CAP 1 Pass the lens cap string through the hole in the lens cap. 2 Fasten the strap to the strap eyelet as shown in the diagram. 3 Adjust the strap to the desired length. Pull the strap through the stopper (A) and make sure it is fastened securely. En 4 strap eyelet Attach the strap to the other eyelet in the same way. J LOADING THE BATTERIES 1 Make sure the camera is turned off. • The monitor is off.
basic_e_po166_6.fm Page 11 Wednesday, March 5, 2003 4:44 PM 3 Slide the battery compartment cover in the direction of A, then lift in the direction of B. B A • Use the ball of your finger to slide the cover. Do not use your fingernail as this could result in injury. 4 Insert the batteries, making sure that they are correctly oriented as shown in the illustration.
basic_e_po166_6.fm Page 12 Wednesday, March 5, 2003 4:44 PM J INSERTING A CARD “Card” in this manual refers to the xD-Picture Card. The camera uses the card to record pictures. 1 Make sure the camera is turned off. • The monitor is off. • The viewfinder is off. • The lens is not extended. 2 Open the card cover. 3 Insert the card in the appropriate direction. Card cover En • Insert the card while keeping it straight. • The card will stop with a click when it is inserted all the way to the end.
basic_e_po166_6.fm Page 13 Wednesday, March 5, 2003 4:44 PM Removing the card 1 Push the card all the way in to unlock it, then let it return slowly. • The card is ejected a short way and then stops. Hold the card straight and pull it out. Note Releasing your finger quickly after pushing the card all the way in may cause it to eject forcefully out of the slot. J TURNING THE POWER ON/OFF 1 Press the tabs on the lens cap as indicated by the arrows and remove the lens cap. 2 Press the power switch.
basic_e_po166_6.fm Page 14 Wednesday, March 5, 2003 4:44 PM 3 To turn the camera off, press the power switch again. Note • To save battery power, the camera automatically enters the sleep mode and stops the operation after about 3 minutes of nonoperation. The camera activates again as soon as you operate the shutter button or zoom lever. J SELECTING A LANGUAGE W 1 Set the mode dial to P and press the power switch to turn the camera on. 2 Press e. • The top menu is displayed.
basic_e_po166_6.fm Page 15 Wednesday, March 5, 2003 4:44 PM 6 Press ac to select one of the following date formats: YM-D (Year/Month/Day), M-D-Y (Month/Day/Year), D-M-Y (Day/Month/Year). Then press d. • Move to the year setting. • The following steps show the procedure used when the date and time settings are set to Y-M-D. 7 Press ac to set the year, then press d to move to the month setting. • To move back to the previous setting, press b. • The first two digits of the year are fixed.
basic_e_po166_6.fm Page 16 Wednesday, March 5, 2003 4:44 PM MENU FUNCTIONS J USING THE MENUS AND TABS When you turn on the camera and press e, the top menu is displayed on the monitor (or viewfinder). The functions of this camera are set from the menus. The top menu is displayed. DRIVE MODE MENU Press e. En WB Use the arrow pad to select a menu. SHORTCUT MENUS MODE MENU • Take you directly to the setting screens. • Display operational buttons at the bottom of the screen.
basic_e_po166_6.fm Page 17 Wednesday, March 5, 2003 4:44 PM Shortcut menus Shooting mode DRIVE Selects a shooting mode from o (single-frame shooting), j (sequential shooting), i (high speed sequential shooting), k (AF sequential shooting) and BKT (auto bracketing). DIGITAL ZOOM Extends the maximum optical zoom, making possible up to approx. 40x zoom. K Sets the image quality and resolution.
basic_e_po166_6.fm Page 18 Friday, March 7, 2003 5:25 PM INFO Displays all the shooting information on the monitor. u Displays a histogram showing the luminance distribution of still pictures. Mode menus The MODE MENU has 4 tabs. Press ac to select a tab and display the associated menu items. These instructions are only for quick reference. For more details on the functions described here, refer to the “Reference Manual” on CD-ROM.
basic_e_po166_6.fm Page 19 Wednesday, March 5, 2003 4:44 PM Selects a mode to be activated when taking pictures in r mode. w Adjusts the amount of light emitted by the flash. Selects from #SLOW1 (1st curtain), HSLOW1 (1st curtain with red-eye reduction) and #SLOW2 #SLOW (2nd curtain) when the flash mode is set to #SLOW (slow synchronization). Reduces the noise that affects pictures during long NOISE REDUCTION exposures.
basic_e_po166_6.fm Page 20 Wednesday, March 5, 2003 4:44 PM WB > SHARPNESS CONTRAST SATURATION CARD tab CARD SETUP Sets the appropriate white balance according to the light source. Makes fine changes to the white balance. Adjusts the sharpness of the image. Adjusts the contrast of the image. Adjusts the level of color depth without changing the tint. Formats a card. SETUP tab Selects whether to keep the current camera settings when you turn off the power. W Selects a language for on-screen display.
basic_e_po166_6.fm Page 21 Wednesday, March 5, 2003 4:44 PM PLAY tab EDIT tab CARD tab SETUP tab SEt CARD EDIt PLAY Playback mode PLAY tab∗1 R Adds sound to a still picture already taken. ∗1 The PLAY tab is not displayed during movie playback. EDIT tab∗2 Q Makes the file size smaller and saves it as a new file. P Crops part of a picture and saves it as a new file. ∗2 The EDIT tab is not displayed during movie playback.
basic_e_po166_6.fm Page 22 Wednesday, March 5, 2003 4:44 PM SHOOTING BASICS Mode dial The shooting modes include modes where the optimal settings for the situation are automatically selected, and modes where you can select the settings best suited to the shooting conditions and the effect you wish to achieve. You can change the shooting mode before and after turning the camera on.
basic_e_po166_6.fm Page 23 Wednesday, March 5, 2003 4:44 PM k Landscape+Portrait shooting Suitable for taking pictures of both your subject and the landscape. The picture is taken with the background as well as the subject in the foreground in focus. You can take pictures of your subject against a beautiful sky or landscape. The camera automatically sets the optimal shooting conditions. l Landscape shooting Suitable for taking pictures of landscapes and other outdoor scenes.
basic_e_po166_6.fm Page 24 Wednesday, March 5, 2003 4:44 PM p Aperture priority/Shutter priority/Manual shooting When the mode dial is set to p, the following items can be set with the menus. A Aperture priority shooting Allows you to set the aperture manually. The camera sets the shutter speed automatically. Press a to increase the aperture value (f number). Press c to decrease the aperture value (f number). S Shutter priority shooting Allows you to set the shutter speed manually.
basic_e_po166_6.fm Page 25 Wednesday, March 5, 2003 4:44 PM J TAKING STILL PICTURES You can take still pictures using either the viewfinder or the monitor. Both methods are easy as all you have to do is to press the shutter button. 1 Set the mode dial to h i j k l m o r p P and press the power switch. • The viewfinder turns on. To shoot using the monitor, press f to turn the monitor on. 2 3 Decide the composition of the picture. Press the shutter button gently (halfway) to adjust the focus.
basic_e_po166_6.fm Page 26 Wednesday, March 5, 2003 4:44 PM J IF CORRECT FOCUS CANNOT BE OBTAINED (FOCUS LOCK) When the subject cannot be focused on, you can focus the camera on another point at roughly the same distance (focus lock) and take the picture as explained below. 1 Position the AF target mark on the subject you want to focus on. F2.8 • When shooting a hard-to-focus subject or a fast-moving subject, point the camera at an object about the same distance away as the subject.
basic_e_po166_6.fm Page 27 Wednesday, March 5, 2003 4:44 PM 3 Press the shutter button fully to start recording. • You can adjust the zoom during movie recording. • The card access lamp blinks while the movie is stored on the card. • During movie recording, N lights red. 4 Press the shutter button again to stop recording. • When the remaining recording time has been used up, recording stops automatically.
basic_e_po166_6.fm Page 28 Wednesday, March 5, 2003 4:44 PM J USING THE FLASH 1 Push the flash lever up. • The flash pops up. 2 Set the flash mode by repeatedly pressing #. • The flash mode changes in the sequence shown below (when all modes are available). En No indication (Auto-flash) ! (Red-eye reduction flash) #SLOW (Slow synchronization) #(Fill-in flash) • To prevent the flash from firing, press down on the top of the flash to retract it. 3 Press the shutter button halfway.
basic_e_po166_6.fm Page 29 Wednesday, March 5, 2003 4:44 PM 1st curtain with red-eye reduction !#SLOW1: !# Adjusts the flash for slow shutter speeds, and minimizes red-eye. J USING THE SELF-TIMER/REMOTE CONTROL Self-timer : This function is useful for taking pictures with yourself included in the photograph. Remote control : Shooting is possible using the remote control device (sold separately in some regions).
basic_e_po166_6.fm Page 30 Wednesday, March 5, 2003 4:44 PM ADVANCED SHOOTING J SEQUENTIAL SHOOTING There are 4 sequential shooting modes: sequential shooting, high speed sequential shooting, AF sequential shooting and auto bracketing. Sequential shooting modes can be selected from the DRIVE mode menu. Sequential shooting cannot be performed when the record mode is set to TIFF. En Drive mode o Shoots 1 frame at a time when the shutter button is pressed.
basic_e_po166_6.fm Page 31 Wednesday, March 5, 2003 4:44 PM J AE LOCK This function is suitable for situations when optimal exposure is difficult to achieve, such as when there is excessive contrast between the subject and the surroundings. J MACRO MODE SHOOTING Focusing is usually slow when you get close to a subject (W: 7 cm/2.8" to 60 cm/2.0 ft., T: 1.2 m/3.9 ft. to 2 m/6.6 ft.). However, in the & mode focusing is performed quickly.
basic_e_po166_6.fm Page 32 Wednesday, March 5, 2003 4:44 PM PLAYBACK J PLAYING BACK STILL PICTURES 1 Set the mode dial to q and press the power switch. • The monitor turns on and displays the last picture taken. (Single-frame playback) 2 Use the arrow pad to play back other pictures. Jumps to the picture 10 frames back. Displays the previous picture. En Displays the next picture. Jumps to the picture 10 frames ahead.
basic_e_po166_6.fm Page 33 Wednesday, March 5, 2003 4:44 PM 2 Pull the zoom lever toward T. • Each time you pull the zoom lever, the picture is enlarged gradually. • To return the picture to the original size (1x), push the zoom lever toward W. Index display This function lets you show several pictures at the same time on the monitor. It is useful for quickly finding the picture you want to view. The number of pictures shown can be 4, 9 or 16.
basic_e_po166_6.fm Page 34 Wednesday, March 5, 2003 4:44 PM When FRAME BY FRAME is selected a : Displays the first frame of the movie. c : Displays the last frame of the movie. d : Displays the next frame. The movie can be played continuously by holding the button down. b : Displays the previous frame. The movie can be played continuously in reverse by holding the button down. e : Displays the MOVIE PLAYBACK menu.
basic_e_po166_6.fm Page 35 Wednesday, March 5, 2003 4:44 PM All-frame erase 1 In the top menu, select MODE MENU → CARD → CARD SETUP, and press d. 2 3 Press ac to select R ALL ERASE, then press e. Press a to select YES, then press e. • All the pictures are erased. J FORMATTING (CARD SETUP) This function lets you format a card. Formatting prepares cards to receive data. Before using non-Olympus cards or cards which have been formatted on a PC, you must format them with this camera.
basic_e_po166_6.fm Page 36 Wednesday, March 5, 2003 4:44 PM J PLAYBACK ON A TV Use the AV cable provided with the camera to play back recorded images on your TV. 1 Make sure that the TV and camera are turned off. Connect the A/V OUT jack on the camera to the video input terminal on the TV using the AV cable. Connect to the TV’s video input (yellow) and audio input (white) terminals. AV cable En A/V OUT jack (MONO) 2 Turn the TV on and set it to the video input mode.
basic_e_po166_6.fm Page 37 Wednesday, March 5, 2003 4:44 PM PRINT SETTINGS By specifying the desired number of prints of each picture on the card and whether or not the date and time are to be printed, you can print out the desired pictures according to the print reservation data with a DPOFcompatible printer or at a DPOF photo lab. What is DPOF? DPOF is short for Digital Print Order Format. DPOF is a format used to record automatic print information from cameras.
basic_e_po166_6.fm Page 38 Wednesday, March 5, 2003 4:44 PM DOWNLOADING PICTURES TO A COMPUTER By connecting the camera to a computer with the provided USB cable, images on a card can be transferred to the computer. Some OS’s (operating systems) may need a special setup before connecting to the camera for the first time. Follow the chart below. For details of the procedures in the chart, refer to the “Reference Manual” on the software CD.
basic_e_po166_6.fm Page 39 Wednesday, March 5, 2003 4:44 PM • QuickTime is needed for playing back movies. QuickTime is included on the provided software CD. • If you want to process images, make sure to download them to your computer first. Depending on the software, image files may be destroyed if the images are processed (rotated, etc.) while they are on the card. J FOR OTHER OS USERS Users running other OS cannot use the provided USB cable to connect the camera directly to a computer.
basic_e_po166_6.fm Page 40 Wednesday, March 5, 2003 4:44 PM ERROR CODES Monitor indication q NO CARD q CARD ERROR q WRITEPROTECT En q CARD FULL L NO PICTURE r PICTURE ERROR Possible cause Corrective action The card is not inserted, or it cannot be recognized. Insert a card or insert a different card. Wipe the gold contacts with a commercially available cleaning paper and insert the card again. If the problem persists, format the card. If the card cannot be formatted, it cannot be used.
basic_e_po166_6.fm Page 41 Wednesday, March 5, 2003 4:44 PM SPECIFICATIONS Product type : Digital camera (for shooting and displaying) Recording system Still picture : Digital recording, TIFF (non-compression), JPEG (in accordance with Design rule for Camera File system (DCF)), Exif 2.
basic_e_po166_6.fm Page 42 Wednesday, March 5, 2003 4:44 PM Shooting range : 0.6 m to ) (W), 2 m to ) (T) (NORMAL) 0.07 m to ) (W), 1.2 m to ) (T) (macro mode) Viewfinder : 0.44" TFT color LCD display, 180,000 pixels Monitor : 1.
basic_e_po166_6.
basic_f_po166_6.fm Page 44 Monday, March 10, 2003 10:25 AM TABLE DES MATIÈRES GUIDE RAPIDE DE DÉMARRAGE . . . . . . . . . . . . . . . . 46 FONCTIONS DU MENU . . . . . . . . . . . . . . . . . . . . . . . . . 58 INSTRUCTIONS DE BASE . . . . . . . . . . . . . . . . . . . . . . 64 PRISE DE VUE ÉLABORÉE . . . . . . . . . . . . . . . . . . . . . 72 AFFICHAGE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 74 RÉGLAGES D’IMPRESSION. . . . . . . . . . . . . . . . . . . . .
basic_f_po166_6.fm Page 45 Monday, March 10, 2003 10:19 AM Lisez soigneusement ce manuel avant d’utiliser votre appareil photo afin de garantir un usage correct. Nous vous conseillons d’effectuer quelques prises de vue d’essai pour vous familiariser avec votre appareil avant de prendre des photographies importantes. J Ce manuel contient uniquement des instructions de base. Vous trouverez un descriptif plus détaillé des fonctions dans le Manuel de référence sur le CD-ROM.
basic_f_po166_6.
basic_f_po166_6.
basic_f_po166_6.fm Page 48 Monday, March 10, 2003 10:19 AM J INDICATIONS SUR LE VISEUR ET L’ÉCRAN ACL Mode prise de vue F2.8 F2.8 SQ1 1600 1200 Vue fixe Vidéo Éléments Fr 1 Mode prise de vue Indications P, A, S, M, N, o, m, L, K, J, I, s 2 Vitesse d’obturation 16 – 1/1000 3 Valeur de l’ouverture F2.8 – F8.0 4 -2.0 – +2.0 Compensation -3.0 – +3.
basic_f_po166_6.fm Page 49 Monday, March 10, 2003 10:19 AM Éléments 11 Commande d’intensité du flash Indications w -2.0 – +2.0 12 Mode d’entraînement o, j, i, k, BKT 13 Retardateur Télécommande Y < 14 Enregistrement du son R 15 Mode d’enregistrement TIFF, SHQ, HQ, SQ1, SQ2 16 Résolution 2288 × 1712, 1280 × 960, 640 × 480, 320 × 240 etc.
basic_f_po166_6.fm Page 50 Monday, March 10, 2003 10:19 AM Mode affichage SQ1 1600 1200 Vue fixe Vidéo Éléments Indications 1 Contrôle des piles e, f 2 Réservation d’impression, Nombre de copies Image vidéo < × 10 3 Enregistrement du son H 4 Protection 9 5 Mode d’enregistrement TIFF, SHQ, HQ, SQ1, SQ2 6 Résolution 2288 × 1712, 1280 × 960, 640 × 480, 320 × 240 etc. 7 Valeur de l’ouverture F2.8 – F8.0 8 Vitesse d’obturation 16 – 1/1000 9 Compensation d’exposition -2.0 – +2.
basic_f_po166_6.fm Page 51 Monday, March 10, 2003 10:19 AM Bloc mémoire Le bloc mémoire d’image s’allume lorsque vous effectuez une prise de vue fixe. Pendant que le bloc est allumé, l’appareil enregistre la photo sur la carte. L’indication du bloc mémoire change comme indiqué ci-dessous en fonction de la situation de prise de vue. L’indication ne s’affiche pas pendant l’enregistrement d’une vidéo. Indicateur de contrôle des piles F2.
basic_f_po166_6.fm Page 52 Monday, March 10, 2003 10:19 AM J FIXATION DE LA COURROIE ET DU BOUCHON D’OBJECTIF 1 Faire passer le cordon dans le trou du bouchon d’objectif. 2 Attachez la courroie à l’œillet comme illustré ci-contre. 3 Régler la courroie à la longueur souhaitée. Tirer sur la courroie à travers l’arrêtoir (A) pour s’assurer qu’elle est bien serrée. Œillet de courroie Fr 4 Fixez la courroie à l’autre œillet en suivant la même procédure.
basic_f_po166_6.fm Page 53 Monday, March 10, 2003 10:19 AM 3 Faites glisser le couvercle du compartiment des piles en direction de A et levez-le ensuite vers B. B A • Faites glisser le couvercle avec le bout du doigt. N’utilisez pas votre ongle, vous risqueriez de vous blesser. 4 Introduisez les piles en prenant garde de les placer dans le bon sens, comme l’indique l’illustration.
basic_f_po166_6.fm Page 54 Monday, March 10, 2003 10:19 AM J INSERTION D’UNE CARTE Le terme “carte” dans ce manuel désigne une carte xD-Picture Card. L’appareil utilise la carte pour enregistrer les images. 1 Assurez-vous que l’appareil photo est éteint. 2 Ouvrez le couvercle du logement de carte. 3 Insérez la carte dans le bon sens. Fr • L’écran ACL est éteint. • Le viseur est éteint. • L’objectif n’est pas sorti. • Tenez la carte droite pendant que vous l’insérez.
basic_f_po166_6.fm Page 55 Monday, March 10, 2003 10:19 AM Retrait de la carte 1 Poussez la carte à fond pour la déverrouiller puis laissez-la sortir lentement. • La carte est éjectée sur une courte distance puis s’arrête. Tenez la carte droite et sortez-la. Remarque Si vous retirez votre doigt rapidement après avoir enfoncé la carte à fond, elle risque d’être propulsée brutalement hors de son logement.
basic_f_po166_6.fm Page 56 Monday, March 10, 2003 10:19 AM 3 Appuyez de nouveau sur le commutateur marche/arrêt pour éteindre l’appareil. Remarque • Pour économiser l’énergie des piles, l’appareil passe automatiquement en mode veille et cesse de fonctionner après 3 minutes d’inactivité. L’appareil se réactive dès que vous appuyez sur le déclencheur ou le levier du zoom. J SÉLECTION DE LA LANGUE W Fr 1 Amenez la molette Mode sur P et appuyez sur le commutateur marche/arrêt pour allumez l’appareil.
basic_f_po166_6.fm Page 57 Monday, March 10, 2003 10:19 AM 5 Appuyez sur ac pour sélectionner X, puis appuyez sur d. • L’encadré vert passe sur l’élément sélectionné. 6 Appuyez sur ac pour sélectionner l’un des formats de date suivants: Y-M-D (Année/Mois/Jour), M-D-Y (Mois/ Jour/Année), D-M-Y (Jour/Mois/Année). Appuyez ensuite sur d. • Passez au réglage de l’année. • Les étapes suivantes montrent la procédure utilisée lorsque le format de date est Y-M-D.
basic_f_po166_6.fm Page 58 Monday, March 10, 2003 10:19 AM FONCTIONS DU MENU J UTILISATION DES MENUS ET DES ONGLETS Lorsque vous mettez l’appareil sous tension et que vous appuyez sur e, le menu principal s’affiche à l’écran. C’est à partir des menus que vous réglez chacune des fonctions de l’appareil. Le menu principal s’affiche. DRIVE MODE MENU Appuyez sur e. WB Utilisez la molette de défilement pour sélectionner un menu.
basic_f_po166_6.fm Page 59 Monday, March 10, 2003 10:19 AM Menus Raccourcis Mode prise de vue DRIVE Sélectionne un mode de prise de vue parmi o (prise d’une seule vue), j (prise de vue en série), i (prise de vue en série à grande vitesse), k (prise de vue en série avec mise au point automatique) et BKT (bracketing automatique). DIGITAL ZOOM [ZOOM NUM] Amplifie le zoom optique maximum, ce qui porte le facteur de grossissement à environ 40x. K Règle la qualité et résolution.
basic_f_po166_6.fm Page 60 Monday, March 10, 2003 10:19 AM INFO Affiche toutes les informations de prise de vue sur l’écran ACL. u Affiche un histogramme indiquant la distribution de la lumière sur les images fixes. [ ]: Lorsque le français est sélectionné. Menus Mode Le MODE MENU comprend 4 onglets. Appuyez sur ac pour sélectionner un onglet et afficher les options correspondantes. Ces instructions sont uniquement destinées à une prise en main rapide.
basic_f_po166_6.fm Page 61 Monday, March 10, 2003 10:19 AM w #SLOW NOISE REDUCTION [REDUC BRUIT] MULTI METERING [MULTI-MESUR] DIGITAL ZOOM [ZOOM NUM] FULLTIME AF [AF CONTINU] AF MODE [MODE AF] % PANORAMA [PANORAMIQUE] 2 IN 1 [2 EN 1] FUNCTION [FONCTION] AF AREA [ZONE AF] INFO u R (vues fixes) R (vidéos) Permet de régler la quantité de lumière émise par le flash.
basic_f_po166_6.fm Page 62 Monday, March 10, 2003 10:19 AM WB (Balance des blancs) > SHARPNESS [NETTETE] CONTRAST SATURATION Onglet CARD [CARTE] CARD SETUP [CONFIG CARTE] Règle la balance des blancs appropriée selon la source de lumière. Permet d’effectuer un réglage fin de la balance des blancs. Règle la netteté de l’image. Règle le contraste de l’image. Règle le niveau de profondeur des couleurs sans modifier la teinte. Formate une carte.
basic_f_po166_6.fm Page 63 Monday, March 10, 2003 10:19 AM Onglet PLAY [LECTURE] Onglet EDIT Onglet CARD [CARTE] Onglet SETUP [CONFIG] SEt CARD EDIt PLAY Mode affichage Onglet PLAY∗1 [LECTURE] Ajoute des sons à une vue fixe déjà prise. R ∗1 L’onglet PLAY ne s’affiche pas pendant la lecture d’une vidéo. Onglet EDIT∗2 Diminue la taille du fichier et l’enregistre sous un nouveau nom. Détoure une partie de l’image et l’enregistre dans un P nouveau fichier.
basic_f_po166_6.fm Page 64 Monday, March 10, 2003 10:19 AM INSTRUCTIONS DE BASE Molette Mode Les modes de prise de vue incluent notamment les modes dans lesquels les réglages optimaux de l’image sont sélectionnés automatiquement et les modes dans lesquels vous pouvez choisir les réglages les mieux adaptés aux conditions de prise de vue et aux effets que vous souhaitez obtenir. Vous pouvez changer de mode de prise de vue avant et après avoir allumé l’appareil photo.
basic_f_po166_6.fm Page 65 Monday, March 10, 2003 3:11 PM k Photo de paysage + portrait Permet de photographier à la fois le sujet et l’arrière-plan. La mise au point s’effectue à la fois sur l’arrière-plan et sur le sujet au premier plan. Vous pouvez ainsi photographier un sujet devant un beau ciel ou un magnifique paysage. L’appareil photo se règle automatiquement pour des conditions de prise de vue optimales. l Photo de paysage Permet de photographier des paysages et des scènes en extérieur.
basic_f_po166_6.fm Page 66 Monday, March 10, 2003 10:19 AM p Prise de vue avec priorité à l’ouverture / priorité à la vitesse / prise de vue manuelle Lorsque la molette Mode se trouve sur p, vous pouvez définir les éléments suivants avec les menus. A Prise de vue avec priorité à l’ouverture Vous permet de régler l’ouverture manuellement. L’appareil photo règle automatiquement la vitesse d’obturation. Appuyez sur a pour augmenter la valeur de l’ouverture. (indice F).
basic_f_po166_6.fm Page 67 Monday, March 10, 2003 10:19 AM J PRISE DE VUE FIXE Vous pouvez effectuer des prises de vue fixe soit à l’aide du viseur, soit à l’aide de l’écran ACL. Les deux méthodes sont simples, il vous suffit d’appuyer sur le déclencheur. 1 Amenez la molette Mode sur h i j k l m o r p P et appuyez sur le commutateur marche/ arrêt. • Le viseur s’allume. Pour effectuer une prise de vue avec l’écran ACL, appuyez sur f pour l’allumer. 2 3 Choisissez le cadrage de la photo.
basic_f_po166_6.fm Page 68 Monday, March 10, 2003 10:19 AM J SI UNE MISE AU POINT SATISFAISANTE EST IMPOSSIBLE (MÉMORISATION DE LA MISE AU POINT) Lorsque la mise au point sur le sujet est impossible, vous pouvez effectuer la mise au point sur quelque chose d’autre qui se trouve plus ou moins à la même distance (mémorisation de la mise au point) et prendre la photo selon la procédure décrite ci-dessous.
basic_f_po166_6.fm Page 69 Monday, March 10, 2003 10:19 AM 3 Appuyez complètement sur le déclencheur pour commencer l’enregistrement. • Vous pouvez régler le zoom pendant l’enregistrement d’une vidéo. • Le voyant d’accès de carte clignote pendant l’enregistrement de la vidéo sur la carte. • Pendant l’enregistrement d’une vidéo, N s’allume en rouge. 4 Appuyez de nouveau sur le déclencheur pour arrêter l’enregistrement.
basic_f_po166_6.fm Page 70 Monday, March 10, 2003 10:19 AM J UTILISATION DU FLASH 1 Poussez le levier du flash vers le haut. • Le flash est éjecté. 2 Régler le mode du flash en appuyant plusieurs fois sur #. • Le mode du flash change selon la séquence ci-dessous (si tous les modes sont disponibles).
basic_f_po166_6.fm Page 71 Monday, March 10, 2003 10:19 AM Premier rideau avec atténuation de l’effet “yeux rouges” !# SLOW1: Ajuste le flash pour des vitesses d’obturation lentes, et minimise l’effet “yeux rouges”. J UTILISATION DU RETARDATEUR/DE LA TELECOMMANDE Retardateur : Cette fonction est utile lorsque la personne qui prend la photo veut être dessus. Télécommande: Vous pouvez effectuer des prises de vue à partir de la télécommande (vendu séparément dans certaines régions).
basic_f_po166_6.fm Page 72 Monday, March 10, 2003 10:19 AM PRISE DE VUE ÉLABORÉE J PRISE DE VUE EN SÉRIE Il existe 4 modes de prise de vue en série: prise de vue en série, prise de vue en série à grande vitesse, prise de vue en série avec mise au point automatique, et bracketing automatique. Vous pouvez sélectionner les modes de prise de vue en série dans le menu DRIVE. La prise de vue en série est impossible lorsque le mode d’enregistrement est TIFF.
basic_f_po166_6.fm Page 73 Monday, March 10, 2003 10:19 AM J MÉMORISATION AE Cette fonction est intéressante dans les situations où une exposition optimale est difficile à obtenir, par exemple en présence d’un contraste excessif entre le sujet et la scène qui l’entoure. J PRISE DE VUE EN MODE GROS PLAN La mise au point est généralement lente lorsque vous vous rapprochez d’un sujet (W : 7 cm à 60 cm, T : 1,2 m à 2 m). Le mode & permet cependant une mise au point plus rapide.
basic_f_po166_6.fm Page 74 Monday, March 10, 2003 10:19 AM AFFICHAGE J AFFICHAGE DE VUES FIXES 1 Amenez la molette Mode sur q et appuyez sur le commutateur marche/arrêt. • L’écran ACL s’allume et affiche la dernière photo prise. (Affichage d’une seule photo) 2 Utilisez la molette de défilement pour afficher d’autres photos. Affiche la 10 ème photo en arrière. Affiche la photo précédente. Fr Affiche la photo suivante. Affiche la 10 ème photo en avant.
basic_f_po166_6.fm Page 75 Monday, March 10, 2003 10:19 AM 2 Tirez le levier de zoom vers “T”. • L’image est s’agrandit progressivement à chaque fois que vous tirez sur le levier du zoom. • Pour revenir à la taille originale de l’image (1x), poussez le levier de zoom vers W. Affichage d’index Cette fonction vous permet d’afficher plusieurs images à la fois sur l’écran ACL. Elle est utile lorsque vous voulez rechercher une photo particulière. Vous pouvez afficher 4, 9 ou 16 images.
basic_f_po166_6.fm Page 76 Monday, March 10, 2003 10:19 AM Lorsque l’option FRAME BY FRAME est sélectionnée a : Affiche la première image de la vidéo. c : Affiche la dernière image de la vidéo. d : Affiche l’image suivante. La vidéo défile en continu si vous maintenez la touche enfoncée. b : Affiche l’image précédente. La vidéo défile en continu en marche arrière si vous maintenez la touche enfoncée. e : Affiche le menu MOVIE PLAYBACK.
basic_f_po166_6.fm Page 77 Monday, March 10, 2003 10:19 AM Effacement de toutes les photos 1 Dans le menu principal, sélectionnez MODE MENU CARD CARD SETUP et appuyez sur d. 2 Appuyez sur ac pour sélectionner R ALL ERASE, puis appuyez sur e. 3 Appuyez sur a pour sélectionner YES, puis appuyez sur e. • Toutes les photos sont effacées. J FORMATAGE (CONFIGURATION DE LA CARTE) Cette fonction vous permet de formater des cartes. Le formatage prépare les cartes à recevoir des données.
basic_f_po166_6.fm Page 78 Monday, March 10, 2003 10:19 AM J AFFICHAGE SUR UN TÉLÉVISEUR Utilisez le câble vidéo fourni avec l’appareil photo pour afficher les images enregistrées sur votre téléviseur. 1 Assurez-vous que le téléviseur et l’appareil photo sont éteints. Branchez la prise A/V OUT de l’appareil photo à la prise d’entrée vidéo du téléviseur avec le câble AV. À brancher aux bornes d’entrée vidéo (jaune) et d’entrée audio (blanc) du téléviseur.
basic_f_po166_6.fm Page 79 Monday, March 10, 2003 10:19 AM RÉGLAGES D’IMPRESSION En indiquant le nombre de tirage voulu pour chaque photo sur la carte et en précisant si l’heure et la date doivent ou non y figurer, vous pouvez imprimer les photos souhaitées en fonction des données de réservation d’impression avec une imprimante compatible DPOF ou auprès d’un laboratoire photo qui prend en charge le format DPOF.
basic_f_po166_6.fm Page 80 Monday, March 10, 2003 10:19 AM TRANSFERT DES PHOTOS VERS UN ORDINATEUR En raccordant l’appareil photo à un ordinateur avec le câble USB fourni, vous pouvez transférer des images d’une carte vers l’ordinateur. Certains systèmes d’exploitation peuvent nécessiter un réglage spécial avant du premier branchement de l’appareil. Suivre le schéma ci-dessous. Pour plus de détails sur les procédures décrites dans le tableau, se référer au “Manuel de référence” sur le logiciel CD.
basic_f_po166_6.fm Page 81 Monday, March 10, 2003 10:19 AM • QuickTime est nécessaire pour visionner des vidéos. QuickTime figure sur le CD fourni. • Si vous voulez éditer des images, vous devez d’abord les télécharger sur votre ordinateur. Avec certains types de logiciels, les fichiers d’image peuvent être détruits si vous tentez d’éditer (faire pivoter, etc.) alors qu’ils sont toujours sur la carte.
basic_f_po166_6.fm Page 82 Monday, March 10, 2003 10:19 AM CODES D’ERREUR Indication de l’écran ACL [PAS DE CARTE] Aucune carte n’a été insérée ou vous avez inséré une carte qui n’est pas reconnue. Insérez une carte ou remplacez la carte existante. Essuyez les zones de contacts dorées avec du papier de nettoyage (disponible dans le commerce) et insérez à nouveau la carte. Si le problème persiste, formatez la carte. Si la carte ne peut pas être formatée, vous ne pouvez pas l’utiliser.
basic_f_po166_6.fm Page 83 Monday, March 10, 2003 10:19 AM CARACTÉRISTIQUES Type d’appareil : Appareil photo numérique (prise de vue et affichage) Système d’enregistrement Vue fixe : Enregistrement numérique, TIFF (sans compression), JPEG (conforme au système Design rule for Camera File system (DCF)), Exif 2.
basic_f_po166_6.fm Page 84 Monday, March 10, 2003 10:19 AM Portée de prise de vue : 0,6 m à ) (W), 2 m à ) (T) (NORMAL) 0,07 m à ) (W), 1,2 m à ) (T) (mode gros plan) Viseur : Écran couleur à cristaux liquides TFT de 0,44", 180.000 pixels Écran ACL : Écran couleur à cristaux liquides TFT de 1,5", 114.
basic_f_po166_6.
basic_d_po166_6.fm Page 86 Monday, March 10, 2003 10:39 AM INHALT ERSTE SCHRITTE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 88 MENÜFUNKTIONEN . . . . . . . . . . . . . . . . . . . . . . . . . . 100 GRUNDLEGENDE AUFNAHMEFUNKTIONEN . . . . . 106 WEITERE AUFNAHMEFUNKTIONEN . . . . . . . . . . . . 114 WIEDERGABE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 116 DRUCKBEZOGENE EINSTELLUNGEN . . . . . . . . . . . 121 HERUNTERLADEN VON BILDERN AUF IHREN COMPUTER . . . . . . . . . . .
basic_d_po166_6.fm Page 87 Monday, March 10, 2003 10:39 AM Lesen Sie sich dieses Handbuch sorgfältig durch, bevor Sie die Kamera benutzen, um eine ordnungsgemäße Bedienung zu gewährleisten. Wir empfehlen, vor wichtigen Aufnahmen Probeaufnahmen vorzunehmen, um sich mit der Bedienung und den Funktionen der Kamera vertraut zu machen. J Diese Bedienhinweise sind lediglich als einfache Anleitung zu verstehen.
basic_d_po166_6.
basic_d_po166_6.
basic_d_po166_6.fm Page 90 Monday, March 10, 2003 10:39 AM J LCD-MONITOR-UND SUCHER-ANZEIGEN Aufnahmemodus F2.8 F2.8 SQ1 1600 1200 Einzelbild Movie Funktion 1 Aufnahmemodus De Anzeigen P, A, S, M, N, o, m, L, K, J, I, s 2 Verschlusszeit 16 – 1/1000 3 Blendenwert F2.8 – F8.0 4 Belichtungskorrektur Belichtungsrichtwert -2.0 – +2.0 -3.0 – +3.
basic_d_po166_6.fm Page 91 Monday, March 10, 2003 10:39 AM Funktion 13 Selbstauslöser Fernauslöser Anzeigen Y < 14 Tonaufzeichnung R 15 Speichermodus TIFF, SHQ, HQ, SQ1, SQ2 16 Bildauflösung 2288 × 1712, 1280 × 960, 640 × 480, 320 × 240 usw.
basic_d_po166_6.fm Page 92 Monday, March 10, 2003 10:39 AM Wiedergabemodus SQ1 1600 1200 Einzelbild Movie Funktion De Anzeigen 1 Batterieladezustand e, f 2 Druckvorauswahl, Anzahl der Ausdrucke Movie < × 10 n 3 Tonwiedergabe H 4 Schreibschutz 9 5 Speichermodus TIFF, SHQ, HQ, SQ1, SQ2 6 Bildauflösung 2288 × 1712, 1280 × 960, 640 × 480, 320 × 240 usw. 7 Blendenwert F2.8 – F8.0 8 Verschlusszeit 16 – 1/1000 9 Belichtungskorrektur -2.0 – +2.
basic_d_po166_6.fm Page 93 Monday, March 10, 2003 10:39 AM Speichersegmente Die Speichersegmente leuchten, wenn Sie ein Einzelbild erstellen. Während die Anzeige leuchten, wird die Aufnahme auf die Karte gespeichert. Die Speichersegment anzeige ändert sich wie nachfolgend gezeigt je nach Aufnahmestatus. Bei der Movie-Aufnahme erscheint diese Anzeige nicht. Batterieladelicht F2.
basic_d_po166_6.fm Page 94 Monday, March 10, 2003 10:39 AM J ANBRINGEN DES TRAGERIEMENS UND OBJEKTIVSCHUTZ 1 Führen Sie die das Befestigungsschnürchen für den Objektivschutz durch das Loch im Objektivschutz. 2 Führen Sie das kurze Ende des Trageriemens wie in der Abbildung gezeigt durch die Trageriemenöse. 3 4 De Trageriemenöse Bringen Sie den Trageriemen auf die gewünschte Länge. Ziehen Sie den Trageriemen durch den Stopper (A) und vergewissern Sie sich, dass er sicher befestigt ist.
basic_d_po166_6.fm Page 95 Monday, March 10, 2003 10:39 AM 3 Schieben Sie den Batteriefachdeckel in Richtung A und heben Sie ihn anschließend in Richtung B. B A • Zum Bewegen des Batteriefachdeckels die Fingerkuppe verwenden. Verwenden Sie nicht Ihren Fingernagel, da es dadurch zu Verletzungen kommen kann. 4 Legen Sie die Batterien wie in der Abbildung gezeigt mit der richtigen Polarität ein.
basic_d_po166_6.fm Page 96 Monday, March 10, 2003 10:39 AM J EINLEGEN EINER KARTE Die Bezeichnung „Karte“ bezieht sich in diesem Handbuch auf die Fabrikate xDPictureCard-Karte. Die Kamera verwendet die Karte, um darauf Bilder abzuspeichern. 1 Vergewissern Sie sich, dass die Kamera abgeschaltet ist. • Der LCD-Monitor muss ausgeschaltet sein. • Der Sucher muss ausgeschaltet sein. • Das Objektiv muss eingeschoben sein. 2 Den Kartenfachdeckel öffnen. 3 Legen Sie die Karte in der richtigen Richtung ein.
basic_d_po166_6.fm Page 97 Monday, March 10, 2003 10:39 AM Entfernen einer Karte 1 Drücken Sie die Karte zum Entriegeln vorsichtig nach innen und lassen Sie sie anschließend langsam herausgleiten. • Die Karte wird dabei ein kleines Stück aus dem Einschubfach ausgeschoben und bleibt danach stehen. Halten Sie die Karte gerade und ziehen Sie sie heraus.
basic_d_po166_6.fm Page 98 Monday, March 10, 2003 10:39 AM 3 Zum Ausschalten der Kamera drücken Sie erneut auf den Ein-/Ausschalter der Kamera. • Um Batteriestrom zu sparen, wechselt die Kamera automatisch in den Sleep-Modus, wenn innerhalb von 3 Minuten kein Hinweis Bedienungsschritt erfolgt. Die Kamera schaltet sich wieder ein, sobald Sie den Auslöser oder den Zoomregler leicht drücken.
basic_d_po166_6.fm Page 99 Monday, March 10, 2003 10:39 AM 3 Drücken Sie auf die Pfeiltaste d und wählen Sie MODE MENU. 4 Drücken Sie ac und wählen Sie den Menüanzeiger SETUP. Drücken Sie anschließend d. 5 Drücken Sie ac und wählen Sie X. Drücken Sie anschließend d. • Der grüne Begrenzungsrahmen bewegt sich zur gewählten Funktion. 6 Drücken Sie ac und wählen Sie eines der nachfolgenden Datumsformate: Y-M-D (Jahr/Monat/Tag), M-D-Y (Monat/Tag/Jahr), D-M-Y (Tag/Monat/Jahr). Drücken Sie anschließend d.
basic_d_po166_6.fm Page 100 Monday, March 10, 2003 10:39 AM MENÜFUNKTIONEN J VERWENDEN DER MENÜS UND MENÜANZEIGER Wenn Sie die Kamera einschalten und e drücken, erscheint das Hauptmenü auf dem LCD-Monitor (oder Sucher). Die Funktionen der Kamera werden über Menüs eingestellt. Das Hauptmenü wird angezeigt. DRIVE MODE MENU Drücken Sie e. WB Verwenden Sie die Pfeiltasten für die Menüauswahl. De AUSWECHSELBARE MENÜFUNKTIONEN MENU MODUS • Damit gelangen Sie direkt zu den Einstellmenüs.
basic_d_po166_6.fm Page 101 Monday, March 10, 2003 10:39 AM Auswechselbare Menüfunktionen Aufnahmemodus DRIVE Verändert den Aufnahmemodus zwischen o (Einzelbildaufnahme), j (Serienaufnahme), i (Hochgeschwindigkeits-Serienaufnahme), k (AF-Serienaufnahme) und BKT (Automatische Belichtungsreihen). DIGITAL ZOOM [DIGITALZOOM] Erweitert den größtmöglichen optischen Zoom und ermöglicht ZoomVergrößerungen auf das ungefähr 40fache. K Zum Einstellen von Bildqualität und Bildauflösung.
basic_d_po166_6.fm Page 102 Monday, March 10, 2003 10:39 AM INDEX Erzeugt für ein Movie einen Index mit 9 Bildern. EDIT [BEARBEITEN] Zum Bearbeiten eines Movies. INFO Zeigt alle Aufnahmeinformationen auf dem LCD-Monitor an. u Zur Anzeige des Luminanzhistogramms der aufgenommenen Bilder. [ ]: Bei der Anzeige der deutschsprachigen Menüs. MODE-Menü Das MODE MENU verfügt über 4 Menüanzeiger. Drücken Sie ac, um einen Menüanzeiger auszuwählen und die zugehörigen Menüfunktionen anzuzeigen.
basic_d_po166_6.fm Page 103 Monday, March 10, 2003 10:39 AM w #SLOW NOISE REDUCTION [RAUSCHMIND.] MULTI METERING [MEHRFACHMESS.] DIGITAL ZOOM [DIGITALZOOM] FULLTIME AF [AF PERMANENT] AF MODE [AF-MODUS] % PANORAMA 2 IN 1 [2-IN-1] FUNCTION [AUFNAHMEFKT] AF AREA [AF FELD] INFO u R (Einzelbilder) R (Movies) Zur Regulierung der Blitzlichtstärke. Wechselt zwischen #SLOW1 (1. Vershlussvorhangseffekt: Blitzabgabe beim Öffnen des Verschlusses), H SLOW1 (1.
basic_d_po166_6.fm Page 104 Monday, March 10, 2003 10:39 AM > SHARPNESS [SCHÄRFE] CONTRAST [KONTRAST] SATURATION [FARBSÄTTIGUNG] Menüanzeiger CARD [KARTE] CARD SETUP [KARTE EINRICHTEN] Ermöglicht Feinabstimmungen an der jeweiligen Weißabgleicheinstellung. Reguliert die Bildschärfe. Reguliert den Bildkontrast. Reguliert die Farbsättigung, ohne die Farben selbst zu verändern. Formatiert eine Karte.
basic_d_po166_6.fm Page 105 Monday, March 10, 2003 10:39 AM Menüanzeiger PLAY [W.GAB] Menüanzeiger EDIT [BEARB.] Menüanzeiger CARD [KARTE] Menüanzeiger SETUP [EINR] SEt CARD EDIt PLAY Wiedergabemodus Menüanzeiger PLAY ∗1 [W. GAB] Fügt einer bereits erstellten Einzelaufnahme Ton hinzu. R ∗1 Während der Movie-Wiedergabe ist der Menüanzeiger PLAY nicht sichtbar. Menüanzeiger EDIT∗2 [BEARB.] Verringert die Dateigröße und speichert das veränderte Bild als neue Datei.
basic_d_po166_6.fm Page 106 Monday, March 10, 2003 10:39 AM GRUNDLEGENDE AUFNAHMEFUNKTIONEN Programmwählscheibe Unter den Aufnahmemodi gibt es solche, bei denen die optimalen Einstellungen für die jeweilige Aufnahmesituation automatisch ausgewählt werden. Zusätzlich gibt es Modi, bei denen Sie die Einstellungen selbst auswählen können, so dass sie am besten zu den Aufnahmebedingungen und dem Effekt passen, den Sie erzielen möchten.
basic_d_po166_6.fm Page 107 Monday, March 10, 2003 10:39 AM j Sportaufnahmen Mit diesem Modus können Sie sehr schnell bewegte Motive (zum Beispiel beim Sport) verzerrungsfrei aufnehmen. Die Kamera wählt hierfür automatisch die optimalen Aufnahmeeinstellungen. k Landschafts + Porträtaufnahmen Diese Aufnahmeart eignet sich zum gleichzeitigen Aufnehmen von Motiv und Hintergrund. Das im Vordergrund befindliche Motiv sowie der Hintergrund werden scharf abgebildet.
basic_d_po166_6.fm Page 108 Monday, March 10, 2003 10:39 AM p Aufnahme mit Blendenvorwahl/Aufnahme mit Verschlusszeitvorwahl/Manuelle Aufnahme Wenn die Programmwählscheibe auf p eingestellt ist, lassen sich über die Menüs die folgenden Funktionen einstellen. A Aufnahme mit vorrangigem Blendenwert Hierbei können Sie den gewünschten Blendenwert manuell einstellen. Die Kamera stellt die erforderliche Verschlusszeit automatisch ein. Drücken Sie a, um den Blendenwert (F-Nummer) zu erhöhen.
basic_d_po166_6.fm Page 109 Monday, March 10, 2003 10:39 AM J EINZELBILDMODUS Für Einzelbildaufnahmen können Sie entweder den Sucher oder den LCDMonitor verwenden. Beide Methoden sind einfach, denn Sie müssen dabei lediglich auf den Auslöser drücken. 1 Stellen Sie die Programmwählscheibe auf h i j k l m o r p P und drücken Sie auf den Ein-/ Ausschalter der Kamera. • Der Sucher wird eingeschaltet.
basic_d_po166_6.fm Page 110 Monday, March 10, 2003 10:39 AM J WENN DIE RICHTIGE BILDSCHÄRFE NICHT ERZIELT WERDEN KANN (SCHÄRFESPEICHER) Wenn sich das Motiv nicht scharf stellen lässt, lässt sich die Kamera auf einen anderen Punkt richten, der ungefähr genauso weit entfernt ist (Schärfespeicher) und die Aufnahme wie nachfolgend beschrieben erstellen. 1 Richten Sie die AF-Markierung auf das Motiv, dass Sie scharfstellen möchten.
basic_d_po166_6.fm Page 111 Monday, March 10, 2003 10:39 AM 2 Wählen Sie den gewünschten Bildausschnitt. • Verwenden Sie den Zoomregler, um Ihr Motiv zu Vergrößern. 3 Drücken Sie den Auslöser vollständig, um die Aufnahme zu starten. • Sie können die Zoomeinstellung während der Movie-Aufnahme anpassen. • Die Schreibanzeige blinkt, solange das Movie auf die Karte gespeichert wird. • Während der Movie-Aufnahme leuchtet N rot.
basic_d_po166_6.fm Page 112 Monday, March 10, 2003 10:39 AM J BLITZPROGRAMMWAHL 1 Schieben Sie die Blitzentriegelung nach oben. • Der Blitz wird ausgeschoben. 2 Stellen Sie den gewünschten Blitzmodus durch mehrmaliges Drücken von # ein. • Dadurch verändert sich der Blitzmodus jeweils in der nachfolgend gezeigten Reihenfolge (wenn alle Blitzaufnahmearten verfügbar sind).
basic_d_po166_6.fm Page 113 Monday, March 10, 2003 10:39 AM Verschlussvorhangseffekt: Blitzabgabe bei Öffnen des Verschlusses #SLOW1 (Grundeinstellung ab Werk): Reguliert den Blitz bei langen Belichtungszeiten. Verschlussvorhangseffekt: Blitzabgabe bei Schließen des Verschlusses #SLOW2: Der Blitz wird bei dieser Blitzsynchronisation unmittelbar vor Schließen des Verschlusses abgegeben.
basic_d_po166_6.fm Page 114 Monday, March 10, 2003 10:39 AM WEITERE AUFNAHMEFUNKTIONEN J SERIENAUFNAHMEMODUS Es gibt vier verschiedene Serienaufnahmemodi: Serienaufnahme, Hochgeschwindigkeits-Serienaufnahme, AF-Serienaufnahme und automatische Belichtungsreihen. Die einzelnen Serienaufnahmemodi lassen sich über das Menü zum Auslösermodus auswählen. Die Serienaufnahme steht im Speichermodus TIFF nicht zur Verfügung.
basic_d_po166_6.fm Page 115 Monday, March 10, 2003 10:39 AM J AE LOCK Diese Funktion eignet sich für Situationen, in denen sich die optimale Belichtungsstärke schwer erzielen lässt, beispielsweise wenn zwischen Motiv und Umgebung ein starker Kontrastunterschied herrscht. J NAHAUFNAHMEN Normalerweise erfolgt die Scharfstellung langsam, wenn Sie sich nahe an einem Motiv befinden. (W: 7 cm bis 60 cm, T: 1,2 m bis 2 m). Im & Modus erfolgt die Scharfstellung jedoch schnell.
basic_d_po166_6.fm Page 116 Monday, March 10, 2003 10:39 AM WIEDERGABE J EINZELBILDWIEDERGABE 1 Stellen Sie die Programmwählscheibe auf q drücken Sie auf den Ein-/Ausschalter der Kamera. • Der LCD-Monitor schaltet sich ein und zeigt die zuletzt erstellte Aufnahme. (Wiedergabe eines Bildes) 2 Verwenden Sie die Pfeiltasten, wenn Sie andere Bilder wiedergeben möchten. Wiedergabesprung um 10 Bilder rückwärts. Wiedergabe des vorherigen Bildes. Wiedergabe des nächsten Bildes.
basic_d_po166_6.fm Page 117 Monday, March 10, 2003 10:39 AM 2 Ziehen Sie den Zoomregler in Richtung T. • Bei jeder Betätigung des Zoomreglers wird das Bild stufenweise vergrößert. • Um das Bild wieder in Normalgröße (1x) darzustellen, drücken Sie den Zoomregler in Richtung W. Indexwiedergabe Mit dieser Funktion können Sie gleichzeitig mehrere Bilder auf dem LCDMonitor anzeigen. Diese Funktion ist nützlich, wenn Sie ein gewünschtes Bild schnell auffinden möchten.
basic_d_po166_6.fm Page 118 Monday, March 10, 2003 10:39 AM Funktionen im Modus FRAME BY FRAME (Bild-für-Bild-Wiedergabe) a : Zeigt das erste Bild des Movies an. c : Zeigt das letzte Bild des Movies an. d : Zur Wiedergabe des nächsten Bildes. Die Taste gedrückt halten, um die Movie-Bilder durchgehend anzuzeigen. b : Zur Wiedergabe des vorherigen Bildes. Diese Taste gedrückt halten, um die Movie-Bilder durchgehend rücklaufend zu zeigen. e : Ruft das Menü MOVIE PLAYBACK auf.
basic_d_po166_6.fm Page 119 Monday, March 10, 2003 10:39 AM Löschen aller Bilder 1 WähIen Sie im Hauptmenü MODE MENU CARD SETUP und drücken Sie d. 2 Drücken Sie ac und wählen Sie R ALL ERASE. Drücken Sie anschließend e. 3 CARD Drücken Sie a und wählen Sie YES. Drücken Sie anschließend e. • Alle Bilder werden gelöscht. J KARTENFORMATIERUNG (CARD SETUP) Mit dieser Funktion können Sie eine Karte formatieren. Andernfalls können keine Daten auf die Karte geschrieben werden.
basic_d_po166_6.fm Page 120 Monday, March 10, 2003 10:39 AM J WIEDERGABE AUF EINEM FERNSEHGERÄT Verwenden Sie das mitgelieferte AV-Kabel, wenn Sie Ihre Aufnahmen auf einem Fernsehgerät wiedergeben möchten. 1 Vergewissern Sie sich, dass Fernseher und Kamera ausgeschaltet sind. Verbinden Sie anschließend das AVKabel mit der AV/OUT- Buchse an der Kamera sowie mit dem Videoeingang am Fernsehgerät. An den Videoeingang (gelb) und die Audioeingänge (weiß) des Fernsehgeräts anschließen.
basic_d_po166_6.fm Page 121 Monday, March 10, 2003 10:39 AM DRUCKBEZOGENE EINSTELLUNGEN Durch das Speichern der Druckvorauswahldaten (z.B. Anzahl der gewünschten Ausdrucke pro Bild, mit oder ohne Aufnahmedatum und -zeit) auf der Karte können die Bilder leicht in einem DPOF-Fotolabor oder auf einem DPOF-kompatiblen Drucker ausgedruckt werden. Was ist DPOF? DPOF ist die Abkürzung für Digital Print Order Format. Das DPOF-Format wird verwendet, um die Druckinformationen von Kameras automatisch aufzuzeichnen.
basic_d_po166_6.fm Page 122 Monday, March 10, 2003 10:39 AM HERUNTERLADEN VON BILDERN AUF IHREN COMPUTER Wird die Kamera mittels des mitgelieferten USB-Kabels an einen Personal Computer angeschlossen, können Bilder auf den Personal Computer heruntergeladen werden. Je nach Betriebssystem des Computers kann vor dem ersten Anschluss der Kamera eine spezifische Softwareinstallation erforderlich werden. Beachten Sie bitte die diesbezüglichen Angaben in der nachfolgenden Tabelle.
basic_d_po166_6.fm Page 123 Monday, March 10, 2003 10:39 AM • Für die Movie Wiedergabe ist QuickTime erforderlich ; diese Software befindet sich auf der beigefügten Software-CD. • Wenn Sie Bilder bearbeiten möchten, müssen Sie diese zunächst auf Ihrem Computer herunterladen. Je nach verwendeter Software ist es möglich, dass Bilddateien auf der Karte zerstört werden, wenn Sie diese direkt auf der Karte bearbeiten (z. B. drehen usw.).
basic_d_po166_6.fm Page 124 Monday, March 10, 2003 10:39 AM FEHLERMELDUNGEN LCD-MonitorAnzeige q NO CARD Mögliche Ursache Abhilfemaßnahme [KEINE KARTE] Keine oder eine nicht identifizierbare Karte eingelegt. Legen Sie eine Karte ein oder verwenden Sie eine andere Karte. Reinigen Sie die goldenen Kontakte mit einem Stück Reinigungspapier (im Handel erhältlich) und legen Sie die Karte wieder ein. Lässt sich das Problem dadurch noch immer nicht beheben, müssen Sie die Karte formatieren.
basic_d_po166_6.
basic_d_po166_6.fm Page 126 Monday, March 10, 2003 10:39 AM Aufnahmebereich : 0,6 m bis ) (W), 2 m bis ) (T) (NORMAL) 0,07 m bis ) (W), 1,2 m bis ) (T) (Nahaufnahmemodus) Sucher : 0,44" TFT Farb-LCD-Monitor mit 180.000 Pixeln LCD-Monitor : 1,5" TFT Farb-LCD-Monitor mit 114.
basic_d_po166_6.
basic_sp_po166_6.fm Page 128 Monday, March 10, 2003 10:00 AM CONTENIDO PRIMEROS PASOS . . . . . . . . . . . . . . . . . . . . . . . . . . . 130 FUNCIONES DE LOS MENÚS . . . . . . . . . . . . . . . . . . 142 OPERACIONES BÁSICAS . . . . . . . . . . . . . . . . . . . . . 148 FOTOGRAFÍA AVANZADA . . . . . . . . . . . . . . . . . . . . . 156 REPRODUCCIÓN . . . . . . . . . . . . . . . . . . . . . . . . . . . . 158 AJUSTES DE IMPRESIÓN . . . . . . . . . . . . . . . . . . . . .
basic_sp_po166_6.fm Page 129 Monday, March 10, 2003 10:00 AM Antes de empezar a utilizar la cámara, lea con atención este manual para asegurarse que la usa de forma correcta. Antes de tomar fotografías importantes, le recomendamos realizar varias tomas de prueba para familiarizarse con el uso de su cámara. J Estas instrucciones son sólo un manual básico. Si desea información más detallada sobre las funciones aquí descritas, consulte el Manual de consulta del CD-ROM.
basic_sp_po166_6.
basic_sp_po166_6.
basic_sp_po166_6.fm Page 132 Monday, March 10, 2003 10:00 AM J INDICACIONES DEL VISOR Y DEL MONITOR Modo de fotografía F2.8 F2.8 SQ1 1600 1200 Imagen fija Vídeo Opción Indicaciones P, A, S, M, N, o, m, L, K, J, I, s 1 Modos de fotografía 2 Velocidad del obturador 16 – 1/1000 3 Valor de abertura F2.8 – F8.0 4 Compensación de la exposición Diferencial de exposición -2.0 – +2.0 -3.0 – +3.
basic_sp_po166_6.fm Page 133 Monday, March 10, 2003 10:00 AM Opción 11 Control de intensidad del flash Indicaciones w -2.0 – +2.0 12 Modo de accionamiento o, j, i, k, BKT 13 Disparador automático Control remoto Y < 14 Grabación de sonido R 15 Modo de grabación TIFF, SHQ, HQ, SQ1, SQ2 16 Resolución 2288 × 1712, 1280 × 960, 640 × 480, 320 × 240 etc.
basic_sp_po166_6.fm Page 134 Monday, March 10, 2003 10:00 AM Modo de reproducción SQ1 1600 1200 Imagen fija Vídeo Opción Indicaciones 1 Verificación de las pilas e, f 2 Reserva de impresión, < × 10 Número de impresiones n Vídeo 3 Grabación de sonido H 4 Protección 9 5 Modo de grabación TIFF, SHQ, HQ, SQ1, SQ2 6 Resolución 2288 × 1712, 1280 × 960, 640 × 480, 320 × 240 etc. 7 Valor de abertura F2.8 – F8.
basic_sp_po166_6.fm Page 135 Monday, March 10, 2003 10:00 AM Indicador de memoria El indicador de memoria se enciende cuando se fotografían imágenes fijas. El indicador permanece encendido mientras la cámara almacena la fotografía en la tarjeta. Tal como se observa abajo, el indicador de memoria cambia dependiendo del estado de fotografia. La indicación no se muestra durante la grabación de vídeos. Indicador de verificación de las pilas F2.
basic_sp_po166_6.fm Page 136 Monday, March 10, 2003 10:00 AM J FIJACIÓN DE LA CORREA 1 Pase el cordón del protector del objetivo por el ojalillo. 2 Apriete la correa en el enganche, tal y como se muestra en el diagrama. 3 Ajuste la correa hasta obtener la longitud deseada. Tire de la correa en la trabilla ajustable (A) para comprobar que esté firmemente apretada. 4 Es Enganche para correa Fije la correa al otro enganche de la misma manera.
basic_sp_po166_6.fm Page 137 Monday, March 10, 2003 10:00 AM 3 Deslice la tapa del compartimento de las pilas en la dirección A, luego levántela en la dirección B. B A • Deslice la tapa con la yema del dedo. No use la uña, ya que podría hacerse daño. 4 Inserte las pilas, asegurándose de orientarlas correctamente, tal como se observa en la ilustración.
basic_sp_po166_6.fm Page 138 Monday, March 10, 2003 10:00 AM J INSERCIÓN DE LA TARJETA En este manual se emplea el término “tarjeta” para referirse a las tarjetas xDPicture Card. La cámara utiliza la tarjeta para grabar imágenes. 1 Asegúrese de que la cámara esté apagada. 2 Abra la tapa de la tarjeta. 3 Inserte la tarjeta en la dirección adecuada. • El monitor esté apagado. • El visor esté apagado. • El objetivo no esté extendido. Tapa de la tarjeta • Al insertar la tarjeta, manténgala recta.
basic_sp_po166_6.fm Page 139 Monday, March 10, 2003 10:00 AM Extraer la tarjeta 1 Empuje la tarjeta hasta el fondo para desengancharla, y luego déjela volver despacio. • La tarjeta sale un poco hacia afuera y luego se detiene. Mantenga la tarjeta recta y tire de ella hacia afuera. Nota Si retira el dedo rápidamente después de empujar a fondo la tarjeta, ésta podría salirse con fuerza de la ranura.
basic_sp_po166_6.fm Page 140 Monday, March 10, 2003 10:00 AM 3 Para apagar la cámara, vuelva a presionar el interruptor de encendido. Nota • Para ahorrar energía, la cámara entra automáticamente en el modo de reposo y deja de funcionar después de unos 3 minutos de inactividad. La cámara se volverá a activar en cuanto presione el botón obturador o el mando de zoom. J SELECCIÓN DE UN IDIOMA W 1 Ajuste el disco de modo en P y presione el interruptor de encendido para encender la cámara. 2 Presione e.
basic_sp_po166_6.fm Page 141 Monday, March 10, 2003 10:00 AM 3 Presione d en las teclas de control para seleccionar MODE MENU. 4 Presione ac para seleccionar la pestaña SETUP, y luego presione d. 5 Presione ac para seleccionar X, y luego presione d. • El cuadro verde se mueve a la opción seleccionada. 6 Presione ac para seleccionar uno de los siguientes formatos de fecha: Y-M-D (Año/Mes/Día), M-D-Y (Mes/Día/ Año), D-M-Y (Día/Mes/Año). Luego, presione d. • Muévase hasta el ajuste de año.
basic_sp_po166_6.fm Page 142 Monday, March 10, 2003 10:00 AM FUNCIONES DE LOS MENÚS J USO DE LOS MENÚS Y LAS PESTAÑAS Al encender la cámara y presionar e, se visualizará el menú superior en el monitor (o el visor). Las funciones de esta cámara se ajustan con los menús. Aparece el menú superior. DRIVE MODE MENU Presione e. WB Utilice las teclas de control para seleccionar un menú. Es MENÚS DE ACCESO DIRECTO MENU MODO • Se accede directamente a las pantallas de ajuste.
basic_sp_po166_6.fm Page 143 Monday, March 10, 2003 10:00 AM Menús de acceso directo Modo de fotografía DRIVE Selecciona uno de los siguientes modos de fotografía: o (fotografía de un solo cuadro), j (fotografía secuencial), i (fotografía secuencial de alta velocidad), k (fotografía secuencial de enfoque automático AF) y BKT (bracketing automático). DIGITAL ZOOM [ZOOM DIG.] Amplía el zoom óptico al máximo, permitiendo fotografiar con un zoom de aproximadamente 40x. K Ajusta la calidad y resolución.
basic_sp_po166_6.fm Page 144 Monday, March 10, 2003 10:00 AM MOVIE PLAY [REP. VIDEO] MOVIE PLAYBACK [REP. VIDEO] Reproduce imágenes de vídeo. INDEX [INDICE] Crea una imagen de índice de un vídeo en 9 cuadros. EDIT [EDITAR] Edita un vídeo. INFO Muestra en el monitor toda la información sobre la toma de fotografías. u Muestra un histograma indicando la distribución de luminancia de las imágenes fijas. [ ]: Cuando se seleccione Español. Menús de modo El MODE MENU tiene 4 pestañas.
basic_sp_po166_6.fm Page 145 Monday, March 10, 2003 10:00 AM A/S/M r1/2/3/4 w #SLOW NOISE REDUCTION [RED. RUIDOS] MULTI METERING [MED. MULTI] DIGITAL ZOOM [ZOOM DIG.] FULLTIME AF [AF CONT.] AF MODE [AF MODO] % PANORAMA 2 IN 1 [2 EN 1] FUNCTION [FUNCION] AF AREA [AF ZONA] INFO u R (imágenes fijas) R (vídeos) Selecciona el modo de fotografía entre A (toma con prioridad de abertura), S (toma con prioridad del obturador) y M (toma manual).
basic_sp_po166_6.fm Page 146 Monday, March 10, 2003 10:00 AM CONTRAST [CONTRASTE] SATURATION [SATURACION] Pestaña CARD [TARJETA] CARD SETUP [CONFIG. TARJ.] Pestaña SETUP [CONFIG.] ALL RESET [REP. TOTAL] W PW ON/OFF SETUP [CONF. ON/OFF] REC VIEW [VISUALIZAR] SLEEP MY MODE SETUP [AJ. MI MODO] FILE NAME [NOM. ARCH.] PIXEL MAPPING [PIXEL MAPA] s X m/ft Es VIDEO OUT [SAL. VIDEO] SHORT CUT [ATAJO] CUSTOM BUTTON [AJUSTE BOT.] 8 SHUTTER SOUND [SONIDO OBT.] Ajusta el contraste de las imágenes.
basic_sp_po166_6.fm Page 147 Monday, March 10, 2003 10:00 AM Pestaña PLAY [REPROD.] Pestaña EDIT [EDICION] Pestaña CARD [TARJETA] Pestaña SETUP [CONFIG.] SEt CARD EDIt PLAY Modo de reproducción Pestaña PLAY∗1 [REPROD.] R Agrega sonido a una imagen fija ya tomada. ∗1 La pestaña PLAY no se muestra durante la reproducción de imágenes de vídeo. Pestaña EDIT∗2 [EDICION] Reduce el tamaño del archivo y lo almacena como un nuevo archivo. Corta parte de una imagen y la almacena como un nuevo P archivo.
basic_sp_po166_6.fm Page 148 Monday, March 10, 2003 10:00 AM OPERACIONES BÁSICAS Disco de modo Entre los modos de fotografía se incluyen modos en los que se seleccionan automáticamente los ajustes óptimos para la situación, y modos en los que se pueden seleccionar los ajustes más adecuados a las condiciones de fotografía y al efecto que se desea lograr. Puede cambiar el modo de fotografía antes y después de encender la cámara.
basic_sp_po166_6.fm Page 149 Monday, March 10, 2003 10:00 AM k Toma de paisajes + retratos Adecuada para incluir en la fotografía el sujeto y el paisaje. Se toma la fotografía incluyendo el fondo y enfocando al sujeto en primer plano. Podrá tomar fotos del sujeto con un bonito cielo o paisaje. La cámara ajusta automáticamente las condiciones óptimas de fotografía. l Toma de paisajes Adecuada para fotografiar paisajes y otras escenas exteriores. Tanto el primer plano como el fondo están enfocados.
basic_sp_po166_6.fm Page 150 Monday, March 10, 2003 10:00 AM p Prioridad de abertura/Prioridad del obturador/Toma manual Cuando el disco de modo está en p, se pueden ajustar las siguientes opciones mediante los menús. A Toma con prioridad de abertura Le permite ajustar la abertura de forma manual. La cámara ajusta la velocidad del obturador automáticamente. Presione a para aumentar el valor de abertura (número F). Presione c para disminuir el valor de abertura (número F).
basic_sp_po166_6.fm Page 151 Monday, March 10, 2003 10:00 AM J FOTOGRAFÍA DE IMÁGENES FIJAS Las imágenes fijas se pueden fotografiar usando ya sea el visor o el monitor. Ambos métodos son sencillos ya que sólo tendrá que presionar el botón disparador. 1 Ajuste el disco de modo en h i j k l m o r p P y presione el interruptor de encendido. • Se enciende el visor. Para tomar fotografías usando el monitor, presione f para encender el monitor. 2 3 Determine la composición de la imagen.
basic_sp_po166_6.fm Page 152 Monday, March 10, 2003 10:00 AM J SI NO SE PUEDE OBTENER UN ENFOQUE CORRECTO (BLOQUEO DE ENFOQUE) Cuando el sujeto no se puede enfocar, podrá ajustar el enfoque de la cámara sobre otro punto que se encuentre aproximadamente a la misma distancia (bloqueo de enfoque) y tomar la fotografía de la manera descrita abajo. 1 Sitúe la marca de objetivo de enfoque automático (AF) sobre el sujeto que desea enfocar.
basic_sp_po166_6.fm Page 153 Monday, March 10, 2003 10:00 AM 2 Determine la composición de la imagen. 3 Presione el botón obturador a fondo para iniciar la grabación. • Puede utilizar el mando de zoom para ampliar el sujeto. • Puede ajustar el zoom durante la grabación de vídeo. • La lámpara de control de la tarjeta parpadea mientras que el vídeo se almacena en la tarjeta. • Durante la grabación de vídeos, N se enciende de color rojo. 4 Presione de nuevo el botón obturador para detener la grabación.
basic_sp_po166_6.fm Page 154 Monday, March 10, 2003 10:00 AM J USO DEL FLASH 1 Pulse el mando del flash. • El flash se levanta. 2 Ajuste el modo de flash presionando repetidamente #. • El modo de flash cambia en la secuencia mostrada abajo (cuando están disponibles todos los modos). Sin indicación (Flash automático) #SLOW (sincronización lenta) ! (flash con reducción de ojos rojos) #(flash de relleno) • Para evitar que el flash se dispare, presione sobre la parte superior del mismo para ocultarlo.
basic_sp_po166_6.fm Page 155 Monday, March 10, 2003 10:00 AM Sincronización lenta #SLOW1 #SLOW2 !#SLOW1 Primera cortina (cortina frontal) #SLOW1 (ajuste por defecto de fábrica): Ajusta el flash en velocidades lentas de obturación. Segunda cortina (cortina posterior)#SLOW 2: La segunda cortina dispara el flash justo antes de que el obturador se cierre. Primera cortina con reducción del efecto de ojos rojos !#SLOW1: Ajusta el flash a velocidades lentas de obturación y minimiza el fenómeno de ojos rojos.
basic_sp_po166_6.fm Page 156 Monday, March 10, 2003 10:00 AM FOTOGRAFÍA AVANZADA J FOTOGRAFÍA SECUENCIAL Hay 4 modos de fotografía secuencial: fotografía secuencial, fotografía secuencial de alta velocidad, fotografía secuencial de enfoque automático (AF), y bracketing automático. Los modos de fotografía secuencial pueden seleccionarse desde el menú del modo DRIVE. La fotografía secuencial no será posible si el modo de grabación está ajustado a TIFF.
basic_sp_po166_6.fm Page 157 Monday, March 10, 2003 10:00 AM Multimedición : Mide la intensidad del brillo del sujeto en un máximo de 8 puntos distintos para ajustar la exposición óptima basada en la intensidad media de brillo. Este método resulta muy conveniente con sujetos que presenten un gran contraste. J BLOQUEO AE Esta función resulta conveniente cuando sea difícil de lograr la exposición óptima, por ejemplo cuando haya demasiado contraste entre el sujeto y el entorno.
basic_sp_po166_6.fm Page 158 Monday, March 10, 2003 10:00 AM REPRODUCCIÓN J REPRODUCCIÓN DE IMÁGENES FIJAS 1 Ajuste el disco de modo en q y encienda la cámara. • El monitor se enciende y se visualiza la última imagen fotografiada. (Reproducción de un solo cuadro) 2 Utilice las teclas de control o el disco selector para reproducir otras imágenes. Se retroceden 10 cuadros. Se visualiza la imagen siguiente. Se visualiza la imagen anterior. Se avanzan 10 cuadros.
basic_sp_po166_6.fm Page 159 Monday, March 10, 2003 10:00 AM 1 Seleccione la imagen fija que desee ampliar. • No es posible ampliar imágenes con n. 2 Tire el mando de zoom hacia T. • La imagen aumenta gradualmente cada vez que tire el mando de zoom. • Para que la imagen vuelva al tamaño original (1x), empuje el mando de zoom hacia W. Visualización de índice Esta función le permite visualizar varias imágenes en el monitor de manera simultánea.
basic_sp_po166_6.fm Page 160 Monday, March 10, 2003 10:00 AM FRAME BY FRAME : Reproduce el vídeo de forma manual, cuadro por cuadro. EXIT : Sale del modo de reproducción de vídeo. Presione ac para seleccionar la operación deseada, y luego presione e. Cuando se selecciona FRAME BY FRAME a : Se visualiza el primer cuadro del vídeo. c : Se visualiza el último cuadro del vídeo. d : Se visualiza el cuadro siguiente. El vídeo se puede visualizar continuamente manteniendo presionado el botón.
basic_sp_po166_6.fm Page 161 Monday, March 10, 2003 10:00 AM 2 Presione S. • Se visualiza la pantalla S ERASE. 3 Presione ac para seleccionar YES, y luego presione e. • La imagen se borra y el menú se cierra. Borrar todos los cuadros 1 En el menú superior, seleccione MODE MENU CARD SETUP y presione d. 2 Presione ac para seleccionar R ALL ERASE, y luego presione e. 3 Presione a para seleccionar YES, y luego presione e. CARD • Se borran todas las imágenes.
basic_sp_po166_6.fm Page 162 Monday, March 10, 2003 10:00 AM 2 Presione a para seleccionar YES y luego presione e. • Se muestra la barra BUSY y se formatea la tarjeta. J REPRODUCCIÓN EN UN TELEVISOR Emplee el cable AV proporcionado con la cámara para reproducir en el televisor imágenes grabadas. 1 Compruebe que el televisor y la cámara estén apagados. Conecte el jack A/V OUT de la cámara al terminal de entrada VIDEO del televisor empleando el cable AV.
basic_sp_po166_6.fm Page 163 Monday, March 10, 2003 10:00 AM AJUSTES DE IMPRESIÓN Con solo especificar el número de impresiones que desea de cada imagen de la tarjeta y si desea incluir o no la fecha y la hora, podrá imprimir las imágenes deseadas según los datos de la reserva de impresión, con una impresora compatible con DPOF o en un establecimiento fotográfico DPOF. ¿Qué es DPOF? DPOF son las siglas de Digital Print Order Format.
basic_sp_po166_6.fm Page 164 Monday, March 10, 2003 10:00 AM DESCARGAR FOTOGRAFÍAS A UN ORDENADOR Si conecta la cámara a un ordenador mediante el cable USB suministrado, las imágenes de la tarjeta pueden ser transferidas al ordenador. Algunos OS (sistemas operativos) pueden requerir una configuración especial antes de conectar a la cámara por primera vez. Siga el diagrama de abajo. Para mayores detalles sobre los procedimientos de la tabla, consulte con el “Manual de consulta” del software del CD.
basic_sp_po166_6.fm Page 165 Monday, March 10, 2003 10:00 AM • Se requiere QuickTime para reproducir vídeos. QuickTime está incluido en el CD de software suministrado. • Si desea procesar imágenes, asegúrese de descargarlas primero a su ordenador. Dependiendo del software, los archivos de imágenes se pueden destruir si se procesan (rotan, etc.) las imágenes mientras se encuentran en la tarjeta.
basic_sp_po166_6.fm Page 166 Monday, March 10, 2003 10:00 AM CÓDIGOS DE ERROR Indicaciones del monitor q NO CARD q CARD ERROR q WRITEPROTECT q CARD FULL Es L NO PICTURE r PICTURE ERROR CARD COVER OPEN CARD%SEtUP POWER%OFF FORMAt SELECt 166 Es GO Causas posibles Acciones correctivas [NO TARJETA] La tarjeta no está insertada, o no puede ser reconocida. Inserte una tarjeta, o inserte una tarjeta diferente.
basic_sp_po166_6.fm Page 167 Monday, March 10, 2003 10:00 AM ESPECIFICACIONES Tipo de producto : Cámara digital (para fotografía y visualización) Sistema de grabación Imagen fija : Grabación digital, TIFF (sin compresión), JPEG (de acuerdo con las Normas de Diseño para Sistema de Archivos de Cámara (DCF)), Exif 2.
basic_sp_po166_6.fm Page 168 Monday, March 10, 2003 10:00 AM Monitor : Pantalla LCD TFT a color de 1,5”, 114.
basic_sp_po166_6.
basic_sp_po166_6.
basic_sp_po166_6.
basic_e_po166_hyo4_6.fm Page 1 Wednesday, March 5, 2003 4:45 PM http://www.olympus.com/ OLYMPUS OPTICAL CO., LTD. Customer support (Japanese language only): Tel. 0426-42-7499 Tokyo OLYMPUS AMERICA INC. Two Corporate Center Drive, Melville, NY 11747-3157, U.S.A. Tel. 631-844-5000 Technical Support (USA) 24/7 online automated help: http://support.olympusamerica.com/ Phone customer support: Tel.