000e_kihonhen.
000e_kihonhen.book Page 2 Tuesday, February 10, 2004 2:30 PM Introduction Thank you for purchasing an Olympus digital camera. The reference manuals for this camera consist of the following two guides. To ensure correct and safe use of the camera, please read the manuals before using the camera and refer to them whenever necessary during use. Basic manual (this manual) Contains Reference instructions for manual setup and (on CAMEDIA some for basic Master CD-ROM) operations.
000e_kihonhen.book Page 3 Tuesday, February 10, 2004 2:30 PM Contents * Refer to the Reference Manual for items in black. Basic Introduction.........................................................................2 Contents .............................................................................3 Read this first . . . . . . . . . . . . . . . . . . . . . . 7 Unpacking the box contents ...............................................7 For safe use of your camera .......................................
000e_kihonhen.book Page 4 Tuesday, February 10, 2004 2:30 PM Contents * Refer to the Reference Manual for items in black. Basic Taking still pictures . . . . . . . . . . . . . . . . . 28 58 Shooting ...........................................................................28 58 Holding the camera correctly........................................................ 28 Taking still pictures .......................................................................
000e_kihonhen.book Page 5 Tuesday, February 10, 2004 2:30 PM Contents * Refer to the Reference Manual for items in black. Basic Recording movies . . . . . . . . . . . . . . . . . . . 119 Shooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 119 Settings suited to situation and purpose . . . . . . . . . . . . . . . . . . . . . . 122 Shooting mode settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
000e_kihonhen.book Page 6 Tuesday, February 10, 2004 2:30 PM Contents * Refer to the Reference Manual for items in black. Basic Windows ...........................................................................46 158 Installing the USB driver (When using Windows 98/98SE) .......... 46 Connecting the camera to the computer ...................................... 48 Confirming the computer recognizes the camera......................... 49 158 160 161 Transferring camera images to the computer (P.
000e_kihonhen.book Page 7 Tuesday, February 10, 2004 2:30 PM Read this first Unpacking the box contents Strap Picture card (xD-Picture Card) Read this first Digital Camera L RO NT CO C TE -300 MO RC RE LI-10B lithium ion battery LI-10C battery charger Remote control USB cable AC cable for the charger A/V cable CD-ROM (CAMEDIA Master/ Reference Manual) Basic manual Warranty card Registration card * The QuickStart Guide is also included in the Digital camera package.
000e_kihonhen.book Page 8 Tuesday, February 10, 2004 2:30 PM For safe use of your camera Various symbols are used to warn of hazards to yourself and others and prevent damage to property through misuse of the camera. The symbols and their meanings are explained below. This symbol indicates that failure to observe the instructions will likely result in serious injury or possibly even death.
000e_kihonhen.book Page 9 Tuesday, February 10, 2004 2:30 PM For safe use of your camera Read this first Be careful with the strap when carrying the camera as it can easily catch on stray objects, causing injury or damage. Do not leave the camera in places of high temperature. Avoid touching the battery with your bare hands when replacing it, as it may cause burns. Use only the specified AC adapter.
000e_kihonhen.book Page 10 Tuesday, February 10, 2004 2:30 PM For safe use of your camera The latest high precision technology has gone into the making of the camera’s monitor, but there are some pixels which are permanently lit or which do not light at all. These pixels do not affect the recorded picture. Also, depending on the angle at which the monitor is viewed, the colors and brightness may appear uneven, but this is due to the structure of the monitor and is not a malfunction.
000e_kihonhen.book Page 11 Tuesday, February 10, 2004 2:30 PM For safe use of your camera Do not bring the plus or minus terminals into contact with anything metal. Do not transport or store the battery with metal objects such as necklaces or hairpins. Should battery fluid get in your eyes, wash your eyes immediately with clean water and do not rub them. Seek medical attention immediately as blindness could result. Warning Caution The battery is exclusively for use in Olympus digital cameras.
000e_kihonhen.book Page 12 Tuesday, February 10, 2004 2:30 PM Weatherproof feature This camera is weatherproof, but it cannot be used underwater. Observe the following precautions when using the camera. Olympus will not assume any responsibility for malfunction of the camera caused by water getting inside as a result of misuse by the user. The camera is weatherproof and is not damaged by water spray from any direction. Read this first Do not wash the camera with water. Do not drop the camera into water.
000e_kihonhen.book Page 13 Tuesday, February 10, 2004 2:30 PM Before operating your camera Preparations Attaching the strap Thread the strap through the strap eyelet as shown. Preparations Pull the strap tight, making sure that it is securely fastened and does not come loose. Do not swing the camera around by the strap or pull the strap with excessive force as this may cause the strap to break. Attach the strap correctly so that it does not come off.
000e_kihonhen.book Page 14 Tuesday, February 10, 2004 2:30 PM Charging the battery This camera uses an Olympus lithium ion battery (LI-10B). Do not use any other type of battery. The battery is not fully charged when the camera is purchased. Fully charge the battery before first use. Charging time Plug in the AC cable in the sequence indicated by c and d. Preparations Before operating your camera 14 Approx.
000e_kihonhen.book Page 15 Tuesday, February 10, 2004 2:30 PM Loading and removing the battery This camera uses an Olympus lithium ion battery (LI-10B). Check the following items before loading or removing the battery: c The lens barrier is closed. 1 d The lamps on the right of the viewfinder are off. e The monitor is off. 2 Preparations 3 Loading the battery 2 1 Before operating your camera Slide the battery compartment cover in the direction of c and lift up in the direction of d.
000e_kihonhen.book Page 16 Tuesday, February 10, 2004 2:30 PM Loading and removing the battery Close the battery compartment cover as indicated by the arrows c d. 2 Preparations Before operating your camera 16 Do not force the cover. The compartment cover closes easily when 1 the battery is properly oriented. If the cover does not close easily, check the orientation of the battery. The number of pictures that can be taken with the camera when the new battery is fully charged is shown below.
000e_kihonhen.book Page 17 Tuesday, February 10, 2004 2:30 PM Loading and removing the battery Removing the battery Slide the battery compartment cover in the direction of c and lift up in the direction of d. 2 1 Preparations Remove the battery. Before operating your camera Do not open the battery compartment cover with the camera facing down, as the battery will fall out and may become damaged. Close the battery compartment cover as indicated by the arrows c d.
000e_kihonhen.book Page 18 Tuesday, February 10, 2004 2:30 PM Inserting and removing the picture card This camera stores image data on an xD-Picture Card. No pictures can be taken unless a card has been inserted in the camera. Make sure that 1 c The lens barrier is closed. d The lamps on the right of the viewfinder are off. e The monitor is off. 2 Preparations 3 Inserting the card Before operating your camera Press down firmly at the point indicated by the arrow labeled A.
000e_kihonhen.book Page 19 Tuesday, February 10, 2004 2:30 PM Inserting and removing the picture card A V CLOSE OPEN CLOSE The card will lock into place when fully inserted. OPEN Insert the card into the springloaded card slot as shown. Card PUSH tO EJECt Push the card in as far as it will go. To remove the card, press it in again to eject it.
000e_kihonhen.book Page 20 Tuesday, February 10, 2004 2:30 PM Inserting and removing the picture card Removing the card Open the connector cover and then open the picture card cover. PUSH tO EJECt A V CLOSE OPEN Releasing your finger quickly after pushing the card in may cause it to eject forcefully out of the slot. A V Remove the card. PUSH tO EJECt Before operating your camera CLOSE Preparations The card will be ejected.
000e_kihonhen.book Page 21 Tuesday, February 10, 2004 2:30 PM Power on/off The camera can be turned on in “shooting mode”, “playback mode” or “computer connection mode”. Do not do any of the following while the camera is turned on. Such actions could destroy all the data on the card. Once destroyed, data cannot be restored. • Open the picture card cover or the battery compartment cover. • Connect or disconnect the AC adapter. When taking pictures (Shooting mode) Preparations Turn the camera on.
000e_kihonhen.book Page 22 Tuesday, February 10, 2004 2:30 PM Power on/off When closing the lens barrier, do not press the lens barrier hard against the lens as this could damage the lens or cause malfunction. When viewing pictures (Playback mode) Turn the camera on. Î Press the q. Preparations The picture you have just taken is displayed. Before operating your camera To save battery power, the camera automatically turns off after about 3 minutes of non-operation.
000e_kihonhen.book Page 23 Tuesday, February 10, 2004 2:30 PM Camera settings Menu operations The screen that appears on the monitor when you turn the camera on and press the OK button is called the “First menu”. There are three first menus, one for the shooting mode, playback mode (still picture) and playback mode (movie). Use the arrow pad to select a menu on the first menu and press the OK button.
000e_kihonhen.book Page 24 Tuesday, February 10, 2004 2:30 PM Selecting your language for on-screen display ( ) You can select the language in which the menus and error messages are displayed on the monitor. Open the lens barrier and press the OK button. The first menu is displayed. Press to go to the MODE MENU. MONITOR OFF Press or SETUP tab. Camera settings Press menu.
000e_kihonhen.book Page 25 Tuesday, February 10, 2004 2:30 PM Selecting your language for on-screen display (W) Press or to select the language you want to use. ENGLISH FRANCAIS DEUTSCH ESPAÑOL SELECT The selected language is set. Camera settings Press the OK button again to exit the menu. Preparations Press the OK button.
000e_kihonhen.book Page 26 Tuesday, February 10, 2004 2:30 PM Setting the date and time ( ) Set the date and time before you use the camera. This feature is handy when managing pictures on a computer or printing pictures. Open the lens barrier, or press the q and then the OK button. The first menu is displayed. Press to go to the MODE MENU. MONITOR OFF Press or SETUP tab. Camera settings Press menu.
000e_kihonhen.book Page 27 Tuesday, February 10, 2004 2:30 PM Setting the date and time (X) Press or to select one of the following date formats: Y-M-D (Year/ Month/Day), M-D-Y (Month/Day/ Year), D-M-Y (Day/Month/Year). Press to go to the year field. 2004 . 01 . 01 Y M D The following steps show the procedure used when the date format is set to Y-M-D. SELECT SET GO Preparations Press or to set each of the last two digits of the year. Press to go to the month field. 2004 . 03 .
000e_kihonhen.book Page 28 Tuesday, February 10, 2004 2:30 PM Shooting Taking still pictures Holding the camera correctly When taking pictures, hold the camera firmly with both hands while keeping your elbows at your sides to prevent the camera from moving. It may cause camera movement, extending your arms or not keeping your elbows at your sides. Horizontal grip Taking still pictures Vertical grip Incorrect grip Keep your fingers and the strap away from the lens and flash.
000e_kihonhen.book Page 29 Tuesday, February 10, 2004 2:30 PM Taking still pictures The following section describes how to take pictures using the monitor. Shutter button operation is the same as when taking pictures using the viewfinder. Viewfinder Orange lamp Green lamp Flash stand-by HQ 2272*1704 Monitor AF target mark Open the lens barrier. When power is turned on, the lens extends, the monitor turns on, and the camera enters shooting mode.
000e_kihonhen.book Page 30 Tuesday, February 10, 2004 2:30 PM Taking still pictures Confirm on the monitor that the battery check indication is e (green). The battery check indication only appears for the first 10 seconds after turning on the camera. Monitor Battery check 2272*1704 Battery check The battery check indication changes as follows. Taking still pictures e Lights (Green) Pictures can be taken. f Lights (Red) The battery is running low.
000e_kihonhen.book Page 31 Tuesday, February 10, 2004 2:30 PM Taking still pictures Press the shutter button gently, and keep the button half pressed. Orange lamp The focus and exposure are locked and the green lamp lights steadily. Green lamp When the flash is going to fire, the orange lamp lights. If the green lamp blinks (when closer than 50 cm (19.7 in.) from the subject), this means that the focus is not yet locked. Press the shutter button again gently.
000e_kihonhen.book Page 32 Tuesday, February 10, 2004 2:30 PM Settings suited to situation and purpose Changing shooting modes There are ten shooting modes to choose from on this camera. To easily create the effects you want, simply select the mode best suited to your picture. g“Shooting modes” (P.33) Until you become familiar with the camera, it is recommended that PROGRAM AUTO be used to take pictures. Press in shooting mode. The virtual dial screen for selecting the shooting mode is displayed.
000e_kihonhen.book Page 33 Tuesday, February 10, 2004 2:30 PM Changing shooting modes Shooting modes P (PROGRAM) AUTO All you need to do is press the shutter button. The camera selects the optimal settings. PORTRAIT I Suitable for taking a portrait-style shot of a person. Ideal for capturing accurate skin tones. 2272*1704 LANDSCAPE + PORTRAIT K 2272*1704 LANDSCAPE L Lets you take clear and sharp pictures of distant scenery. Creates a very broad depth of field to keep the entire view in focus.
000e_kihonhen.book Page 34 Tuesday, February 10, 2004 2:30 PM Changing shooting modes INDOOR H The flash is set to reach farther away for taking pictures indoors. [W:Approx. 5.1m (16.7ft): T:Approx. 2.8m (9.2ft)] However, the record mode is limited to 1280 × 960. SQ2 1280 960 BEACH & SNOW F Suitable for taking pictures at a beach or in snow. Lets you take beautiful pictures of scenery with white sand or snow.
000e_kihonhen.book Page 35 Tuesday, February 10, 2004 2:30 PM Using the zoom This camera can shoot at 3× magnification. Press the zoom button to set shooting range and composition. Press the zoom button in shooting mode. Press and hold the T side of the zoom button to zoom in on a distant object. (Telephoto) Press and hold the W side of the zoom button to zoom out and obtain a broader view.
000e_kihonhen.book Page 36 Tuesday, February 10, 2004 2:30 PM Using the flash ( ) The camera is initially set to Auto-flash, but you can select from the following four flash modes according to the shooting conditions. Auto-flash (Factory default setting) The flash fires automatically in low light or backlight conditions. !Red-eye reduction flash The light from the flash may make the subject’s eyes appear red in pictures taken in dark places.
000e_kihonhen.book Page 37 Tuesday, February 10, 2004 2:30 PM Using the flash (#) Press repeatedly in shooting mode to change the flash setting. AUTO 2272 1704 flash mode indication 2272*1704 The flash settings change in the order of the arrow. After “Flash off”, the setting returns to “Auto flash”. AUTO ! # Flash working range The appropriate shooting distance when using the flash is shown below. Shooting distance (W) Shooting distance (T) 0.2 to 3.6 m (0.7 to 11.8 ft.) 0.2 to 2.0 m (0.7 to 6.
000e_kihonhen.book Page 38 Tuesday, February 10, 2004 2:30 PM Changing the image size and quality ( ) This function lets you select the image size and quality when recording pictures on the card. It is best to choose the size and quality according to the purpose. The camera is preset to HQ mode.
000e_kihonhen.book Page 39 Tuesday, February 10, 2004 2:30 PM Changing the image size and quality (K) Press the OK button in shooting mode. The first menu is displayed. Press to go to the record mode settings. MODE MENU MONITOR OFF Press or to select SHQ, HQ, SQ1 or SQ2. If you selected SQ2, go to gstep 3. CANCEL Press to display the SQ2 setup screen. Press or to choose an image size and press the OK button.
000e_kihonhen.book Page 40 Tuesday, February 10, 2004 2:30 PM PLAYBACK Viewing still pictures Playback When the playback mode is activated, the last picture taken is displayed on the monitor. Press the arrow pad to change the picture. Press the q. Playback mode is selected and the last picture taken is displayed on the monitor. (QUICK VIEW) Pressing the arrow pad while playback switches the picture.
000e_kihonhen.book Page 41 Tuesday, February 10, 2004 2:30 PM Erasing pictures ( Single-frame erase ) Digital cameras let you erase pictures that you do not want to keep. When you erase an unwanted picture, the number of pictures you can take increases. Once erased, pictures cannot be restored. While in playback mode, display the picture you want to erase. g “Playback” (P.40) Press the OK button. The first menu is displayed. Press to select R ERASE. MODE MENU ERASE Press to select YES.
000e_kihonhen.book Page 42 Tuesday, February 10, 2004 2:30 PM Before using computer Creating andyour sharing images using a computer Operating procedure You can transfer images from the picture card in the camera to your computer by connecting the camera to the computer with the supplied USB cable. Depending on the Operating System of your computer, you may have to configure your computer before connecting it to the camera. Follow the steps below.
000e_kihonhen.book Page 43 Tuesday, February 10, 2004 2:30 PM Operating procedure Creating and sharing images using a computer Images transferred to the computer can be viewed using graphic software, such as CAMEDIA Master, Paint Shop Pro or Photoshop, Internet browsing software, such as Netscape Communicator or Microsoft Internet Explorer, or a similar JPEG-compatible application software.
000e_kihonhen.book Page 44 Tuesday, February 10, 2004 2:30 PM Identifying the operating system To determine the available methods for transferring images from the camera to your computer, you must first identify the operating system (OS) of your computer. gFor Macintosh users, see the Reference Manual P.156 (CAMEDIA Master CD-ROM) Windows Before using your computer Creating and sharing images using a computer 44 Right click the “My Computer” icon on your desktop and select “Properties”.
000e_kihonhen.book Page 45 Tuesday, February 10, 2004 2:30 PM Determining how to connect the camera to a computer Select one of the following three methods for connecting the camera to the computer. 1. Using the provided USB cable to connect the camera to your computer. g“Windows” (P.48) gFor Macintosh users, see the Reference Manual P.170 (CAMEDIA Master CD-ROM) 3. Inserting and using the optional USB card reader/writer (such as the Olympus MAUSB-10) to connect to your computer.
000e_kihonhen.book Page 46 Tuesday, February 10, 2004 2:30 PM Windows Installing the USB driver (When using Windows 98/98SE) If your Operating System is Windows 98/98SE, you must install the USB driver before connecting the camera to your computer for the first time. Follow the instructions below to install the USB driver in your computer. Once it is fully installed, you do not need to repeat the procedure again. Insert the provided software CD into the CD-ROM drive of your computer.
000e_kihonhen.book Page 47 Tuesday, February 10, 2004 2:30 PM Installing the USB driver (When using Windows 98/98SE) When the installation is complete, the window on the right is displayed. Click “OK” to restart your computer.
000e_kihonhen.book Page 48 Tuesday, February 10, 2004 2:30 PM Connecting the camera to the computer Use the provided USB cable to connect the camera to the computer. Users running Windows 98/98SE need to install the USB driver before connecting the camera to the computer. g“Installing the USB driver” (P.46) Turn the computer on. Make sure that the camera is off (the lens barrier should be closed and the monitor turned off). Connect one end of the USB cable to the USB port on the computer.
000e_kihonhen.book Page 49 Tuesday, February 10, 2004 2:30 PM Confirming the computer recognizes the camera Confirming the computer recognizes the camera Windows 98/98SE/Me/2000 Double click the “My Computer” icon on the desktop. If the camera is properly recognized by the computer, the “Removable Disk” icon is displayed. Double click the “Removable Disk” icon. Windows A “DCIM” folder is displayed.
000e_kihonhen.book Page 50 Tuesday, February 10, 2004 2:30 PM Confirming the computer recognizes the camera Check for the “DCIM” folder. This confirms that the camera is recognized by the computer. You can now operate the files on the computer. Windows XP When the computer has recognized the camera, a window is displayed, prompting you to select the operation for the image files.
000e_kihonhen.book Page 51 Tuesday, February 10, 2004 2:30 PM Using the provided CAMEDIA Master software Installing the CAMEDIA Master software – for first time usage gFor Macintosh users, Reference Manual P.181 (CAMEDIA Master CD-ROM) Windows The following are the system requirements for CAMEDIA Master 4.2.
000e_kihonhen.book Page 52 Tuesday, February 10, 2004 2:30 PM Installing the CAMEDIA Master software – for first time usage Click the “CAMEDIA Master 4.2” button. Read the descriptions on the right-hand side of the window and click “Next”. Using the provided CAMEDIA Master software QuickTime, CAMEDIA Master, and Acrobat Reader will be installed in order.
000e_kihonhen.book Page 53 Tuesday, February 10, 2004 2:30 PM Installing the CAMEDIA Master software – for first time usage e Type in your name and the software serial number. After typing in this information, repeatedly click “Next”. The installation setup begins. If Acrobat Reader is already installed in your computer, the installation process finishes. g“Starting/Exiting the CAMEDIA Master software” (P.
000e_kihonhen.book Page 54 Tuesday, February 10, 2004 2:30 PM Starting/Exiting the CAMEDIA Master software Windows Using the provided CAMEDIA Master software Creating and sharing images using a computer 54 Double click the “CAMEDIA Master” icon on your desktop. The main menu is displayed. CAMEDIA Master main menu 2 1 3 4 5 6 10 9 8 7 1 Transfer images From Camera Transfers images from the camera connected to the computer.
000e_kihonhen.book Page 55 Tuesday, February 10, 2004 2:30 PM Starting/Exiting the CAMEDIA Master software To exit CAMEDIA Master, click “Close” on the main menu. The CAMEDIA Master software closes. Creating and sharing images using a computer The Online User Registration window is displayed. If your computer is connected to the Internet, follow the onscreen instructions to complete user registration. If you do not want to continue with the registration, click “Cancel”.
000e_kihonhen.book Page 56 Tuesday, February 10, 2004 2:30 PM Transferring camera images to the computer The following explains how to transfer images from “CAMERA” to a computer, create an album, and then save it on the computer. Using the provided CAMEDIA Master software Creating and sharing images using a computer 56 When using “From Camera” to transfer images, you must be connected to an Olympus camera. g“Connecting the camera to the computer” (P.48) Images can also be transferred from “Media.
000e_kihonhen.book Page 57 Tuesday, February 10, 2004 2:30 PM Transferring camera images to the computer Using the provided CAMEDIA Master software Create a group. c Click the “New Album” button in the lower righthand corner of the Transfer Images window. The “Create New Album” dialog box is displayed. d Select “Group”, type in “Photos” for the group name, and click “OK” to create the group. The group “Photos” appears on the right-hand side of the window.
000e_kihonhen.book Page 58 Tuesday, February 10, 2004 2:30 PM Transferring camera images to the computer d Type in “20031110” for the name of the album and click “OK”. Using the provided CAMEDIA Master software Creating and sharing images using a computer 58 An album named “20031110” has now been created inside the “Photos” group on the right-hand side of the window. You are now ready to transfer the camera images to the “20031110” album. Transfer images.
000e_kihonhen.book Page 59 Tuesday, February 10, 2004 2:30 PM Transferring camera images to the computer e Click the “Menu” icon in the upper left-hand corner of the Transfer Images window to return to the main menu. g “Windows 98/98SE” (P.60) g “Windows Me/2000/XP” (P.61) g For Macintosh users, Reference Manual P.175 (CAMEDIA Master CD-ROM) To save camera battery power, disconnect the camera from the computer once you have done transferring images to the computer.
000e_kihonhen.book Page 60 Tuesday, February 10, 2004 2:30 PM Disconnecting the camera from your computer Windows 98/98SE Using the provided CAMEDIA Master software Creating and sharing images using a computer 60 Make sure that the orange lamp on the camera is not lit. Orange lamp Green lamp The green lamp, however, is lit. If the orange lamp is lit or blinking, wait until the lamp turns off before proceeding.
000e_kihonhen.book Page 61 Tuesday, February 10, 2004 2:30 PM Disconnecting the camera from your computer Windows Me/2000/XP Orange lamp Green lamp The green lamp, however, is lit. If the orange lamp is lit or blinking, wait until the lamp turns off before proceeding. If the orange lamp does not turn off, this may indicate that the camera is accessing the software on the computer. Close the software that you are using. Single click the “Unplug or Eject Hardware” icon on the taskbar.
000e_kihonhen.book Page 62 Tuesday, February 10, 2004 2:30 PM Other features The CAMEDIA Master software on the CAMEDIA Information CD-ROM enables you to easily manage and enjoy the pictures taken with your digital camera. CAMEDIA Master has the following functions.
000e_kihonhen.book Page 63 Tuesday, February 10, 2004 2:30 PM Menu List The shooting mode and playback mode menus for still pictures and movies are shown separately below. Shooting mode menu (Still picture) First menu Tab MODE MENU CAMERA Function Setting ESP/ 5 ESP , 5 P.80 DRIVE o,j P.87 DIGITAL ZOOM OFF , ON P.70 R OFF , ON P.94 % OFF , ON P.83 PANORAMA P.89 2 IN 1 P.92 IMAGE WB AUTO /5/3/1/> P.77 CARD CARD SETUP YES, NO P.52 ALL RESET ON OFF ON, P.
000e_kihonhen.book Page 64 Tuesday, February 10, 2004 2:30 PM Menu List K SHQ, HQ , SQ1, SQ2 P.74 F –2.0 ~ 0 ~ +2.0 P.79 MONITOR ON MONITOR OFF, MONITOR ON P.51 Shooting mode menus (Movie) First menu Tab Setting ESP , 5 P.80 DIGITAL ZOOM OFF , ON P.70 % OFF , ON P.83 IMAGE WB AUTO /5/3/1/> P.77 CARD CARD SETUP YES, NO P.52 ALL RESET ON OFF ON, P.33 W∗ ENGLISH, FRANCAIS, DEUTSCH, ESPAÑOL, ITALIANO, РУССКИЙ, PORTUGUES, P.
000e_kihonhen.book Page 65 Tuesday, February 10, 2004 2:30 PM Menu List Playback mode menus (Still picture) First menu Tab MODE MENU PLAY EDIT CARD Function Setting P.114 y 0° , +90°, –90° P.101 < <, U P.134 BLACK & WHITE BLACK & WHITE, CANCEL P.108 SEPIA SEPIA, CANCEL P.110 Q 640 × 480, 320 × 240, CANCEL P.112 CARD SETUP ALL ERASE, FORMAT P.117, 52 ALL RESET ON OFF ON, P.33 ENGLISH, FRANCAIS, DEUTSCH, ESPAÑOL, ITALIANO, РУССКИЙ, PORTUGUES, P.
000e_kihonhen.book Page 66 Tuesday, February 10, 2004 2:30 PM Menu List Playback mode menus (Movie) First menu MODE MENU Tab Function PLAY 0 OFF , ON P.114 CARD CARD SETUP ALL ERASE, FORMAT P.117, 52 SETUP Setting ALL RESET ON, ON OFF P.33 W∗ ENGLISH, FRANCAIS, DEUTSCH, ESPAÑOL, ITALIANO, РУССКИЙ, PORTUGUES, P.29 PW ON SETUP SCREEN: OFF, 1 , 2, 3 SOUND: OFF, LOW HIGH P.44 STANDARD , PINK, GREEN, BLUE P.46 VOLUME OFF, LOW, HIGH P.42 8 OFF, LOW, HIGH P.
000e_kihonhen.book Page 67 Tuesday, February 10, 2004 2:30 PM Camera specifications Product type Recording system Still picture : Digital camera (for shooting and displaying) : Digital recording, JPEG (in accordance with Design rule for Camera File system (DCF) : Exif 2.2, DPOF, PRINT Image Matching II, PictBridge.
000e_kihonhen.book Page 68 Tuesday, February 10, 2004 2:30 PM Camera specifications Automatic calendar : Automatic adjustment in range of 2000 to 2099 system Weatherproof : Equivalent to IEC Standard publication 529 IPX4 Type (under OLYMPUS test conditions) Meaning : Camera is not damaged by water spray from any direction.
000e_kihonhen.book Page 69 Tuesday, February 10, 2004 2:30 PM Specifications of accessories xD-Picture Card Product type Memory type Memory capacity Operating voltage Ambient temperature Ambient humidity Dimensions : xD-Picture Card for digital cameras : NAND flash EEP-ROM : Shows the size of the card. (16/32/64/128/256/512MB) : 3V (3.3V) : 0 to 55°C (32 to 131°F) (operation) / –20 to 65°C (– 4 to 149°F) (storage) : Less than 95% (operation and storage) : Approx. 20 × 25 × 1.7 mm (0.8" × 1.0" × 0.
000e_kihonhen.
000e_kihonhen.
000e_kihonhen.book Page 72 Tuesday, February 10, 2004 2:30 PM http://www.olympus.com/ OLYMPUS CORPORATION Shinjuku Monolith, 3-1 Nishi-Shinjuku 2-chome, Shinjuku-ku, Tokyo, Japan OLYMPUS AMERICA INC. Two Corporate Center Drive, Melville, NY 11747-3157, U.S.A. Tel. 631-844-5000 Technical Support (USA) 24/7 online automated help: http://www.olympusamerica.com/support Phone customer support: Tel.
