2758(CS1484)_FR 25 04.4.
WARNING CONTENTS Read this manual carefully before using your camera. Names of parts Camera body ...................................................................... 4 Viewfinder display/LCD panel ............................................. 5 Using the strap ....................................................................... 6 Loading and checking the battery ........................................... 7 Loading the film .....................................................................
4 NAMES OF PARTS — Camera Body NAMES OF PARTS — Viewfinder Display/LCD Panel 2 3 Selftimer/remote control button Flash mode button Shutter release LCD panel button 5 Flash夡 Zoom lever Viewfinder Autofocus window夡 Selftimer indicator/remote control indicator Strap eyelet Lens barrier 夡 Always try to keep this clean. Dirt and stains can result in pictures that are unclear and out-of-focus. Wipe off any dirt or stains with a soft cloth.
USING THE STRAP 6 LOADING AND CHECKING THE BATTERY Use one 3 V lithium battery (CR2). Attach the strap as shown. 1. While pressing the bottom of the battery compartment cover in direction 1, turn it in direction 2 to open. 1 Make sure the lens barrier is closed before opening the battery compartment cover. 2. Insert the battery correctly. Close the battery compartment cover. 2 A brand-new battery lasts for about 10 rolls of film. 3. Slide the lens barrier in direction 1 until it clicks.
LOADING THE FILM 8 1 TAKING PICTURES 1. Slide the back cover release upward to open the back cover. 1 1. Open the lens barrier until it clicks. The lens will extend slightly and the LCD panel will turn on. Compose your shot. Push the zoom lever to the “T” side for telephoto (80mm) or to the “W” side for wide angle (38mm). 2 After about 4 minutes and 30 seconds of inactivity, the lens retracts and the LCD panel goes out. Do not touch the inside of the camera, especially the lens. 2.
FLASH PHOTOGRAPHY 10 Setting the Flash Mode This camera has seven flash modes. Choose the mode best suited to the photographic conditions and your requirements. Working Distance Shoot your subject from a distance of 0.6 m (2.0 ft) to infinity. How to select the mode 앫 If the green lamp blinks, the shutter cannot be released. 앫 Although the shutter will release when a subject is extremely close to the camera, the subject will be out of focus.
Auto Flash 12 1 Flash-Off Use this mode in situations where flash photography is not desired or is prohibited or in twilight or night scenes. 2 1. Press the shutter release button to make sure the orange lamp lights. 2. Press the shutter release button all the way to take the picture. Flash working range (with color negative film) ISO Wide angle (W) Telephoto (T) 100 200 0.6 to 3.5 m (2.0 to 11.5 ft) 0.6 to 4.9 m (2.0 to 15.7 ft) 0.6 to 1.8 m (2.0 to 5.9 ft) 0.6 to 2.5 m (2.0 to 8.2 ft) 400 0.
Infinity 14 The camera automatically sets the working distance at infinity. The flash does not fire except in the Fill-In Flash mode. Red-Eye Reduction Night Scene Flash Use this mode to take pictures of people with a night scene background while reducing “red-eye.” Except for the preflashes, this mode is the same as the Night Scene Flash mode. Closing the lens barrier restores the Auto Exposure mode.
16 SELFTIMER/REMOTE CONTROL/ CAMERA SHAKE INDICATOR How to select the mode Open the lens barrier. Press the selftimer/remote control button ( ). The mode switches in the order shown below. The selected mode is displayed on the LCD panel. Mode display Mode No display ——————— Camera Shake Indicator In this mode, the camera warns you before you shoot if camera shake is likely to cause blurring. Also, when there is significant camera shake, this mode helps reduce blurring.
CORRECTING THE DATE AND TIME RC-300C (Optional) 18 If the selftimer/remote control indicator doesn’t blink even when you press the button, replace the battery with a new one (CR2025). (Quartzdate models only) Be sure to correct the date and time after the battery has been inserted or replaced. 1 How to replace the battery of the remote control (RC-300C) 1. Turn the screw on the bottom of the remote control counterclockwise to loosen. 1 2 2. Turn the remote control over, and remove the cover.
PRINTING THE DATE/TIME 20 (Quartzdate models only) After opening the lens barrier, select the date/time mode you want to print. Press the MODE button. As you press it, the mode will switch in the order shown below. Keep the mode you want to print displayed. CARE AND STORAGE 앫 Do not leave the camera in any place exposed to excessive heat, humidity or direct sunlight — for example, in a car or on the beach. 앫 Do not expose the camera to formalin or naphthalene.
SPECIFICATIONS 22 Type: Film format: Lens: Shutter: Viewfinder: Focusing: Exposure control: Exposure counter: Selftimer: Remote control: Film speed range: Film loading: Film advance: Film rewind: Flash: 2758(CS1484)_EN Fully automatic 35 mm autofocus lens-shutter camera with built-in 38 ~ 80 mm zoom lens. 35 mm standard DX-coded film (24 x 36 mm). Olympus lens, 38 ~ 80 mm, F5.3 ~ 10.4, 5 elements in 4 groups. Programmed electronic shutter.
2758(CS1484)_EN 24 04.4.
