User Manual

Menu functions (Shooting menu)
4
111
EN
Processing options ( Picture Mode)
You can make individual adjustments to contrast, sharpness and other parameters in
[Picture Mode] (P. 76) settings. Changes to parameters are stored for each picture
mode separately.
1
Select [Picture Mode] in W Shooting Menu 1 and
press the Q button.
The camera will display the picture mode available in the
current shooting mode.
2
1
Shooting Menu 1
p
Picture Mode
Digital Tele-converter
Metering
Reset
Back Set
Off
2
Select an option with FG and press the Q button.
• Press I to set the detailed options for the selected picture mode. Detailed options are not
available for some picture modes.
Changes to contrast have no effect at settings other than [Normal].
Digital Zoom ( Digital Tele-converter)
Digital Tele-converter is used to zoom in beyond the current zoom ratio. The camera
saves the center crop. The subject is nearly doubled in size.
1
Select [On] for [Digital Tele-converter] in W Shooting Menu 1.
2
The view in the monitor will be enlarged by a factor of two.
The subject will be recorded as it appears in the monitor.
Digital zoom is not available when [Panorama] is selected in SCN mode, multiple
exposure, panorama, or keystone compensation is selected in Z mode or when
[Standard] is selected in movie mode.
When a RAW image taken with [On] selected for [Digital Tele-converter] is displayed, the
area visible in the monitor is indicated by a frame.
AF target drops.
H is displayed on the monitor.
Improving Focus in Dark Surroundings ( AF Illuminator)
The AF illuminator (AF assist lamp) lights to assist the focus operation in dark
environments. Select [Off] to disable AF illuminator.