User Manual

Preparation
1
17 EN
Inserting the card
In this manual, all storage devices are referred to as “cards.”
The following types of SD memory card (commercially available) can be used with this
camera: SD, SDHC, SDXC, and Eye-Fi.
Cards must be formatted with this camera before fi rst use or after being used with
other cameras or computers. g “Formatting the card (Card Setup)” (P. 120)
Eye-Fi cards
Read “Usable cards” (P. 148) before use.
1
Loading the card.
• Open the battery/card compartment cover.
• Slide the card in until it is locked into place.
g “Usable cards” (P. 148)
3
Terminal area
1
2
• Turn off the camera before loading or removing the battery or card.
• Do not forcibly insert a damaged or deformed card. Doing so may damage the card
slot.
2
Closing the battery/card
compartment cover.
• Be sure the battery/card compartment
cover is closed before using the camera.
1
2
Removing the card
Press the inserted card lightly and it will be
ejected. Pull out the card.
• Do not remove the card while the card
write indicator is displayed (P. 24).