Manual

107 EN
Menu functions (Custom menus)
4
Option Description
g
Time Code
Settings
Set the time codes to record when shooting a movie.
[Time Code Mode]: Set [DF] (drop frame) to record time
codes corrected for errors with respect to recording time
and [NDF] (no drop frame) to record uncorrected time
codes.
[Count Up]: Set to [RR] (Rec run) to use time codes that
only run during recording and [FR] (Free run) to use time
codes that also run when recording has stopped, including
when the camera is powered off.
[Starting Time]: Set a starting time for the time code. Set
[Current Time] to set the time code for the current frame to
00. To set to 00:00:00:00, select [Reset]. You can also set
time codes using [Manual Input].
The time code is not recorded with Motion JPEG movies
shot in H, I, or y mode.
—
n Info Settings
You can select the content of the information displayed on
the movie recording screen. To hide an item, select the item
and press Q to clear the checkmark.
—
Movie
Specifi cation
Settings
You can set combinations of movie image size and
compression format/bit rate in SET1 to SET4. After
performing these settings, you can select them in movie
image quality mode (P. 61).
[Image Size]: Select between [FHD] (Full HD) and [HD].
[Compression/Bit Rate]: Select from [A-I](All-Intra)/[SF]
(Super Fine)/[F](Fine)/[N](Normal).
—
Movie Effect
Choose [On] to enable movie effects in n mode.
39
Movie+Photo
Mode
Choose the way in which photographs are taken during
movie recording.
[mode1]: Take photographs during movie recording without
stopping recording.
[mode2]: Stop recording to take photographs. Recording will
resume after the photograph is taken.
In mode2 and certain shooting modes, it is only possible to
capture a single-frame as a picture during recording. Other
shooting functions may also be limited.
Mode 2 is selected when Motion JPEG H, I, or y is
chosen as the movie image quality mode.
40
nShutter
Function
In movie mode, the following shutter button options are
available.
[mode1]: Use the shutter button to shoot still images.
[mode2]: Press the shutter button all the way down to start
and stop movie recording. In mode2, you cannot control
recording using the R button.
—
Z Movie
MENU
c
Z