Manual

ManualsBrandsOlympus ManualsDigital CamerasOM-D E-M10 Mark II Mirrorless Micro Four Thirds Digital Camera

Shooting

“Point-and-shoot” photography (P program mode)

P mode is a shooting mode where the camera automatically sets the optimal aperture

and shutter speed according to subject brightness. Set the mode dial to P.

250250 F5.6

01:02:0301:02:03

3838

ISO-A

200

0.00.0

S-IS AUTO

Wi-Fi

FHD

Shooting mode

Shutter speed

Aperture value

• The shutter speed and aperture selected by the camera are displayed.

• You can use the front dial to select exposure compensation.

• You can use the rear dial to select program shift.

• The shutter speed and aperture displays will blink if the camera is unable to achieve

correct exposure.

Warning display

example (blinking)

Status Action

60"

F2.8

The subject is too

dark.

• Use the ﬂ ash.

4000

F22

The subject is too

bright.

• The metered range of the camera is

exceeded. A commercially available ND

ﬁ lter (for adjusting the amount of light) is

required.

• The aperture value at the moment when its indication blinks varies with the lens type and

focal length of the lens.

• When using a ﬁ xed [ISO] setting, change the setting. g [ISO] (P. 53 )

Program shift (%)

In P and ART modes, you can choose different

combinations of aperture value and shutter speed without

altering exposure. Turn the real dial to program shift so that

“s” appears next to the shooting mode. To cancel program

shift, turn the rear dial until “s” is no longer displayed.

Cautions

• Program shift is not available when you are using a

ﬂ ash, digital shift, or SCN mode.