OPERATION, MAINTENANCE AND SAFETY INSTRUCTIONS FOR OMEGA ALTISE MODELS INCLUDE: OACHM15B OACHM15W
TABLE OF CONTENTS IMPORTANT SAFETY INSTRUCTIONS .................................................................................................................. 1-2 APPLIANCE DETAILS ................................................................................................................................................3 OPERATION .............................................................................................................................................................
IMPORTANT SAFETY INSTRUCTIONS IMPORTANT Read the safety precautions of this booklet carefully before attempting to assemble, install, operate or maintain the product described. Protect yourself and others by observing all safety information. Failure to comply with instructions could result in personal injury and/or property damage.
IMPORTANT SAFETY INSTRUCTIONS WARNING: To avoid danger of electric shock, unplug from outlet when not in use and before cleaning. If the supply cord is damaged, it must be replaced by an Omega Altise service centre in order to avoid a hazard. In order to avoid overheating, do not cover the heater. The heater must NOT be located immediately below a socket outlet. Do not use the heater in the immediate surrounding of a bath, shower or swimming pool.
APPLIANCE DETAILS Electrical Details Voltage Input: Maximum Power: 220 – 240 Vac ~50 Hz 1500W Technical Details Dimensions: Net Weight: Wind Speed: Noise Level: 194W x 241H x 134.5D mm 2.75 kg ≥ 1.5 m/s ≤ 50dB (1m Distance) Features PTC ceramic heating element Changes the power automatically according to the variation of the ambient temperature.
OPERATION Temperature Knob Power Knob Ensure that the device is connected to the power supply before trying to operate it. Before plugging it in, ensure that the power knob is set to the off position “ ”. Fan Only Function Turning the power knob counter-clockwise to the element does not turn on. position causes the device to operate as a fan. The heating Heater Turn the power knob clockwise to the ‘800W’ setting. This causes the device to operate in low power (800W) mode.
It is important that you retain these instructions, proof of purchase as well as other important documents about this product for future reference. Due to continual product development, Omega Altise reserves the right to alter specifications or appearances without notice. Dispose of packaging responsibly – recycle where facilities are available. A division of Shriro Australia Pty Ltd 104 Vanessa St Kingsgrove NSW 2208 In Australia: 1300 795 572 In New Zealand: (09) 415 6000 www.omegaaltise.