- OMEGA OMB-DBK Option Cards/Module User Guide

DaqBook and DaqBoard and DaqBoard/2000 Connection
Use a 37 pin accessory cable to connect DBK25 to the P2 connector of an appropriate P4 adapter.
These adapters are discussed in the DBK200 document modules.
P2 expansion cables must be kept short for proper operation.
Do not exceed 14” per attached DBK card.
DaqBook and DaqBoard Configuration
No hardware configuration setups internal to the DaqBook or DaqBoard are needed for expanded TTL I/O.
Software Setup
Reference Notes:
o DaqView Users - Refer to chapter 3, DBK Setup in DaqView.
o LogView Users - Refer to chapter 4, DBK Setup in LogView.
DBK25 – Specifications
Name/Function: 8-Channel Relay Output Card
Connectors: Screw terminals for signal outputs
Max Number of Cards: 32
Contact Rating:
2 A @ 28 VDC; 0.6 A @ 120 VAC
Isolation:
Channel-to-System: 250 V
Channel-to-Channel: 150 V
DBK25, pg. 4 879795 DBK Option Cards and Modules