Instructions for the Use and Care and Installation of ORS6WXA Slide-out Rangehood
Thank you for introducing our family to yours At Omega, we understand that cooking, cleaning and washing may not be your favourite things in the world. That's why we created a range of no-nonsense, reliable products that always get the job done for you. With the features you need and nothing you don't. What's more, they're made to fit perfectly into your home life and your wallet. We aim to simplify any further appliance purchases.
INSTALLATION, OPERATION AND MAINTENANCE INSTRUCTIONS FOR OMEGA RANGE HOODS ORSWXA CONTENTS SECTION PAGE NO. Important Safety Instructions……………… 3 Appliance Details ………………………… 4 General Information …………………….. 4 What Is Supplied ………….……………… 4 What May Be Needed For Installation … 4 Installation Instructions .................................... 5-6 Operating Instructions …………………… 6 Replacing The Bulbs …………………….. 7 Cleaning …………………………………… 7 Troubleshooting ................................................
IMPORTANT SAFETY INSTRUCTIONS IMPORTANT: Read the assembly instruction section and safety precautions of this booklet carefully before removing the contents of this carton. 1. In certain circumstances electrical appliances may be a safety hazard. 2.
DO NOT OPERATE THIS APPLIANCE BEFORE READING THE INSTRUCTION BOOKLET APPLIANCE DETAILS Voltage: 220-240V Frequency: 50Hz Lamp Max: 2x28W E14 Halogen Rated Input Power: 256W GENERAL INFORMATION Before installing and operating the range hood, carefully read the following important information regarding installation safety and maintenance. Keep this information booklet accessible for further consultations.
INSTALLATION INSTRUCTIONS Please ensure that all power is switched off before installing the range hood. Installation must be in accordance to the local electrical authority and codes. The switched power outlet for the range hood should be positioned to enable the user to turn the power off, to enable cleaning and any maintenance required. The switched power outlet should be installed within 600mm from the rear of the range hood.
INSTALLATION OF THE OMEGA ORS6WXA RANGE HOOD TO A CABINET The diagram below shows the distance required between the holes in the top of the range hood. Due to manufacturing procedures, it is recommended that the dimension be checked on the range hood before installing. Please note that the exhaust air MUST flow through the opening at the top of the range hood, either via flexible ducting to the outside, or into the room through the cupboard itself (using optional charcoal filters).
REPLACING THE BULBS 1. Switch the range hood off and disconnect from the mains power. 2. Open the aluminium filter. 3. Unscrew the light bulb carefully and replace it with a similarly rated halogen light bulb (230V E14 base 28W MAX). 4. Replace the aluminium filter. CLEANING SAFETY PRECAUTION Before cleaning your range hood or performing any maintenance, please ensure that the range hood is turned off at the power point. Do not use abrasive cleaners to clean the range hood.