USB Adaptor User's Guide

Installation
OMG-USB-232-1 Page 2
Installation
Operating System Installation
Choose Install Software at the beginning of the CD and select the Serial I/O
software drivers and install SeaCOM.
System Installation
The screen captures below are taken from a Windows ME installation. Your
particular operating system may differ slightly from what is shown based on your
version of Windows.
The OMG-USB-232-1 can be connected to any Upstream Type “A” port either
at the PC host or an Upstream Hub. The OMG-USB-232-1 is hot-pluggable,
meaning there is no need to power down your computer prior to installation. The
OMG-USB-232-1 requires no user hardware configuration since there are no
jumpers present on the card.
1. Connect OMG-USB-232-1 to an Upstream Host or Hub.
This indicates that the system has recognized the new device and will now
proceed to locate a driver.