Cut Sheet

EPR Insulation-PVC Jacket, MV-105-133% (5kV) or
100% (8kV), Shielded-Single Conductor-5kV & 8kV
Selling Exclusively Through Electrical Distribuon Since 1977 I phone: (800) 292-OMNI I website: omnicable.com
Atlanta • Boston • Charloe • Chicago • Denver • Houston • Los Angeles • Philadelphia • San Francisco • Seale • St. Louis • Tampa
Medium Voltage Power Cable
Product Construction
Conductor:
• Annealed bare copper
• Compact, Class B stranding
Extruded Strand Shield:
• Extruded thermoset semi-conducng stress-control layer over
conductor
Insulaon:
• Ethylene Propylene Rubber (EPR), colored to contrast with the
black conducng shield layers
Extruded Insulaon Shield:
• Thermoset semi-conducng polymeric layer free stripping
from insulaon
Grounding Conductor(s):
• 1-3 bare or covered grounding conductors may be supplied in
the twisted assembly upon request
Metallic Shield:
• Annealed copper tape with an overlap of 25%
Jacket:
• Flame-retardant, moisture, and sunlight resistant Polyvinyl
Chloride (PVC)
Applications
• Suitable for use in a broad range of commercial, industrial,
and ulity applicaons, where reliability is the major concern,
space is limited, and ease of installaon is crical
• Suitable for use in wet or dry locaons when installed in
accordance with NEC
• For use in aerial, direct burial, conduit, open tray, and
underground duct installaons
Features
• UL Listed as Type MV-105 for use in accordance with the NEC
• UL Labeled and marked “Sunlight resistant for CT Use”
• Compact twisted assembly oers ease of installaon and lower
voltage drop characteriscs as compared to mulple single
conductor systems
• Temperature Range: Normal 105°C, Emergency 140°C, Short
Circuit 250°C
Standards
• Naonal Electric Code (NEC)
• UL 1072
• UL listed as Type MV-105 for use in accordance with NEC
• IEEE 1202
• OSHA Acceptable