User's Manual
DC 19V-1.58A
5W/7.5W/10W/15W
Wireless Charge
Output 5W
Wireless Charge
Wireless Charging Stand:
All devices are supported in
both vertical and side charge.
DC adapter
User Manual
Plug in DC adapter to the wireless charger
using the cable provided .When the charger
is tuned on, the charger is turned on, the
LED light will ick alternately in
white for 2S then go o.
LED Behavior:
A. While powered up but not charging: LED o
B. While powered up and charging: LED on
C. While powered but in FOD/ Error/ Fault condition:
LED Blinks (@ 1.0Hz)
-Blinking sequence is 0.5 sec on, then 0.5 sec o
-Blinking continues while fault condition exists.
Place your device on the center of the
charging plate. The white light stays on
white charing. If the device deviates
from the center of the product, the
wireless charging function may be
aected.
Model: WLS-A07-01
Adapter Input:DC19V--1.58A
Max 15W
Compatible with 7.5W Quick Charger
The Omniklad Wireless Charger is engineered to work with
the most lightweight smartphone cases. However, if the
back of the smartphone case is thicker than 3mm or
contains metallic, magnetic or battery materials, it may
aect the functionality of the wireless charge.
Adapter Input:Output (Wireless): 5W & 7.5& 10W & 15W
Wireless Charger
FCC
This device complies with part 15 of the FCC Rules. Operatiois
subject to the following two conditions : ( 1 ) This device maynot
cause harmful interference , and ( 2 ) this device must acceptany
interference received, including interference that may cause
undesired operation . This equipment has been testedand found
to comply with the limits for a Class B digital devicpursuant to
part 15 of the FCC Rules . These limits are designed to provide
reasonable protection against harmful interferencein a
residential installation . This equipment generates, usesInd can
radiate radio frequency energy and , if not installedand used in
accordance with the instructions , may cause harmful
interference to radio communications . However there is no
guarantee that interference will not occur in a particular
installation . If this equipment does cause harmful interference
to radio or television reception , which can be determined by
turning the equipment o and on , the user is encourzzzaged to
try to correct the interference by one or more of the following
measures: Reorient or relocate the receiving antenna. Increase
the separation between the equipment and receiver. Connect
the equipment into an outlet on a circuit dierentfrom that to
which the receiver is connected. Consult the dealer or an
experienced radio / TV technician for help.
CAUTION : To comply with the limits of the Class B digital device,
pursuant to Part 15 of the FCC Rules , this device mustbe used
with certied peripherals and shielded cables . All peripherals
must be shielded and grounded . Operation with non-certied
peripherals or non-shielded cables may resultin interference to
radio or reception. Caution : Any changes or modications not
expressly approved by the party responsiblefor compliance
could void the users authority to operate the equipment .
Thank you for choosing our Omniklad Wireless Charge.
To ensure optimal performance from this product, please
read this user manual carefully and keep it safe for future
reference, along with your receipt.
Do not disassemble the product in an attempt to modify,
repair or for any other purpose.
Do not store in high temperatures such as intense sunlight or
other forms of heat.
Do not place any magnetic strip cards or similar items (e.g.
credit cards, ATM cards, boarding passes etc.) near this
product as the magnetic data on this product may get
damaged.
Do not drop, knock, or shake this product. Keep your product
in dry area. Humidity and liquids may damage the parts or
electronic circuits.
Use the original or a certied cable only.