Media Converter and Network Interface Device User Manual

When the upload is complete, the GX/TM displays the update status and then automatically restarts with
the newly loaded firmware.
3.4.5.4 Updating the GX/TM Firmware via FTP
Using an FTP application, upload the new firmware into the FTP root directory of the GX/TM. When the
file transfer is complete, the GX/TM verifies the file and then automatically restarts with the newly loaded
firmware.
For detailed instructions on updating the management modules and other modules in the same chassis via
FTP, download the application note “iConverter Management: Updating Modules via FTP” available on
Omnitron’s web page:
http://www.omnitron-systems.com/downloads.php
See Setting GX/TM Passwords Section 3.4.1.4, on how to configure FTP.
Page 24