Datasheet

S8FS-C
32
DIN Rail (Order Separately)
Note: All units are in millimeters unless otherwise indicated.
Note: 1. If there is a possibility that the Power Supply will be subject to vibration or shock, use a steel DIN Rail. Otherwise, metallic filings may
result from aluminum abrasion.
2. If there is a possibility of the Power Supply sliding sideways, place an End Plate (PFP-M) on each end of the Power Supply.
Terminal Cover (Order Separately)
Terminal block direction
Power
rating
Applicable models
Terminal Cover
model number
Models with terminal block
facing upward
25-W S8FS-C025@@
S82Y-FSC-C5
35-W S8FS-C035@@
50-W S8FS-C050@@
75-W S8FS-C075@@
100-W S8FS-C100@@
S82Y-FSC-C7
150-W S8FS-C150@@
200-W S8FS-C200@@
S82Y-FSC-C9
350-W S8FS-C350@@
Models with terminal block
facing forward
15-W S8FS-C015@@J S82Y-FSC-C5MF
25-W S8FS-C025@@J
S82Y-FSC-C5F
35-W S8FS-C035@@J
50-W S8FS-C050@@J
75-W S8FS-C075@@J
100-W S8FS-C100@@J
S82Y-FSC-C7F
150-W S8FS-C150@@J
200-W S8FS-C200@@J
S82Y-FSC-C9F
350-W S8FS-C350@@J
Mounting Rail
(Material: Aluminum)
4.5
15 25 25
10 10
1,000 (500)*
25 25 15 (5)*
35
±0.3
7.3
±0.15
27
±0.15
1
* Value in parentheses are for PFP-50N.
Model
PFP-100N
PFP-50N
Mounting Rail
(Material: Aluminum)
4.5
15 25 25
10 10
1,000
25 25 15
1 1.5
29.2242735
±0.3
16
Model
PFP-100N2
1.3
4.8
35.5
35.5
1.8
1.8
M4 spring washer
10
6.2
1
50
11.5
10
M4 × 8
panhead
screw
End Plate
Model
PFP-M