Datasheet

S8FS-C
6
* Refer to Conditions on page 12.
Power rating 50 W
Item Output voltage 5 V 12 V 15 V 24 V 48 V
Efficiency *
115 VAC input 79% typ. 83% typ. 84% typ. 86% typ. 87% typ.
230 VAC input 80% typ. 84% typ. 85% typ. 86% typ. 87% typ.
Input
Voltage range *
Single phase 85 to 264 VAC, 120 to 370 VDC (The L terminal for the DC input is the positive side and safety
standards do not apply.) (Derating is required according to the input voltage. Refer to Derating Curves on page 18.)
Frequency * 50 /60 Hz (47 to 450 Hz)
Current *
115 VAC input 0.97 A typ.
230 VAC input 0.59 A typ.
Power factor ---
Leakage current
115 VAC input 0.25 mA 0.25 mA 0.25 mA 0.25 mA 0.25 mA
230 VAC input 0.60 mA 0.55 mA 0.55 mA 0.55 mA 0.55 mA
Inrush current *
(for a cold start at 25  )
115 VAC input 16 A typ.
230 VAC input 32 A typ.
Output
Rated Output Current 10 A 4.2 A 3.4 A 2.2 A 1.1 A
Voltage adjustment range * 10% to 10% (with V. ADJ)
Ripple & Noise
voltage *
100 to 240 VAC
input
80 mVp-p max. 110 mVp-p max. 100 mVp-p max. 100 mVp-p max. 120 mVp-p max.
Input variation influence * 0.5% max.
Load variation influence * 1.0% max.
Temperature vari-
ation influence
100 to 240 VAC
input
0.03%/C max.
Startup time *
115 VAC input 730 ms typ. 730 ms typ. 710 ms typ. 710 ms typ. 770 ms typ.
230 VAC input 680 ms typ. 670 ms typ. 610 ms typ. 640 ms typ. 690 ms typ.
Hold time *
115 VAC input 12 ms typ. 14 ms typ. 14 ms typ. 14 ms typ. 14 ms typ.
230 VAC input 71 ms typ. 77 ms typ. 78 ms typ. 77 ms typ. 80 ms typ.
Addi-
tional
func-
tions
Overload protection Yes, automatic reset
Overvoltage protection * Yes, 115% or higher of rated output voltage, power shut off (shut off the input voltage and turn on the input again)
Overheat protection No
Series operation Yes (For up to 2 Power Supplies, external diodes are required.)
Parallel operation No (However, backup operation is possible, external diodes are required.)
Remote sensing No
Remote control No
Output indicator Yes (LED: Green)
Insula-
tion
Withstand voltage
3 kVAC for 1 min. (between all input terminals and output terminals) current cutoff 20 mA
2 kVAC for 1 min. (between all input terminals and PE terminals) current cutoff 20 mA
1 kVAC for 1 min. (between all output terminals and PE terminals) current cutoff 20 mA
Insulation resistance 100 M min. (between all output terminals and all input terminals/PE terminals) at 500 VDC
Envi-
ronment
Ambient operating temperature
20 to 60C (Derating is required according to the temperature. Refer to Derating Curves on page 17.) (with no
condensation or icing)
Storage temperature 40 to 85C (with no condensation or icing)
Ambient operating humidity 20% to 90% (Storage humidity: 10% to 95%)
Vibration resistance
10 to 55 Hz, 0.375-mm half amplitude for 2 h each in X, Y, and Z directions
10 to 500 Hz, 0.26-mm half amplitude for 1 h each in X, Y, and Z directions
Shock resistance 150 m/s
2
, 3 times each in X, Y, Z directions
Reliabil-
ity
MTBF 135,000 hrs min.
Life expectancy * 10 years min.
Con-
struc-
tion
Dimensions (WHD) Refer to Dimensions on pages 20 and 24.
Weight 300 g max.
Cooling fan No
Degree of protection ---
Stan-
dards
Harmonic current emissions Conforms to EN 61000-3-2, GB17625.1
EMI
Conducted
Emissions
Conforms to EN 61204-3 Class B, EN 55011 Class B, GB9254
Radiated
Emissions
Conforms to EN 61204-3 Class B, EN 55011 Class B, GB9254
EMS Conforms to EN 61204-3 high severity levels
Safety Standards
Approved Standards
UL : cURus UL 60950-1 (Recognition) OVC II Pol2
CSA: cURus C22.2 No60950-1
CCC: GB4943
Conformed Standards
EN: EN 60950-1 OVC II Pol2
Marine Standards No
SEMI No