Ethernet Units Operation Manual

Creating Routing Tables Section 3-8

Example 2: Three Interconnected Networks

This example shows the relay network table settings for three different inter-

connected networks.

In the table for PC #3, for example, if network #A is taken as the end network,

then network #B becomes the relay network and node #c becomes the relay

node. If network #C is taken as the end network, then network #B still

becomes the relay network and node #e becomes the relay node.

Relay Network Table

No.

End

network

Relay

network

Node

PC #1

Node #a

Network #A

PC #2

Node #b

Node #c

Node #d

PC #3

Network #B

Network #C

Node #e

PC #4

Node #f

Node #g