User's Manual

Advanced Operations
En-45
Operating
procedure
(➔ page 44)
Explanatory Notes
a Menu selection
b Setting target
c Setting options (default setting underlined)
If you connect a video component to an HDMI input,
you must assign that input to an input selector. For
example, if you connect your Blu-ray Disc/DVD player
to HDMI IN 2, you must assign “HDMI2” to the
“BD/DVD” input selector.
Here are the default assignments.
■ BD/DVD, CBL/SAT, GAME, PC, AUX, TV/CD
` HDMI1, HDMI2, HDMI3, HDMI4, HDMI5, HDMI6:
Select the input to which the component has
been connected.
` -----:
Select if you’re not using the HDMI OUT.
Each HDMI input cannot be assigned to two input
selectors or more. When HDMI1 - HDMI6 have
already been assigned, you must first set any
unused input selectors to “-----” or you will be
unable to assign HDMI1 - HDMI6 to other input
selectors.
Note
• If no video component is connected to the HDMI input (even
if the HDMI input is assigned), the AV receiver selects the
video source based on the setting of “2. Component
(Component Video Input)”.
• When an HDMI IN is assigned to an input selector as
explained here, the same HDMI IN will be set as a priority
in the “3. Digital Audio (Digital Audio Input)” (➔ page 46). In
this case, if you want to use the coaxial or optical audio
input, make the appropriate selection in the “Audio
Selector” setting (➔ page 51).
• Do not assign an HDMI IN to the TV/CD selector while
“HDMI CEC (RIHD)” is set to “On” (➔ page 52), otherwise
appropriate CEC (Consumer Electronics Control) operation
will not be guaranteed.
• If you assign “-----” to an input selector that is currently
selected in “HDMI Through” (➔ page 53), the “HDMI
Through” setting will be automatically switched to “Off”.
11. Network
Setup
(➔ page 54)
MAC Address
DHCP [IP Address, Subnet Mask,
Gateway, DNS Server]
Proxy URL [Proxy Port]
Network Standby
Update Notice
Menu item Setting target
■ Subwoofer
` Yes
` No
4. Sp Config (Speaker Configuration)
a
b
c
1. HDMI Input
2. Component
3. Digital Audio
4. Sp Config
5. Sp Distance
6. Level Cal
7. Audio Adjust
8. Source Setup
9. Hardware
10. HDMI Setup
11. Network Setup
Setup
BD/DVD
CBL/SAT
GAME
PC
AUX
TV/CD
Menu
Setting target
1. HDMI Input
Input selector Default assignment
BD/DVD HDMI1
CBL/SAT HDMI2
GAME HDMI3
PC HDMI4
AUX -----
TV/CD -----