Contents BLU-RAY DISC PLAYER Introduction ............................................................ 2 BD-SP807 Connections ............................................................ 13 Instruction Manual Playback ..................................................................... 19 Function Setup ..................................................... 33 Others ........................................................................... 50 Thank you for purchasing an Onkyo BLU-RAY DISC PLAYER.
WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPARATUS TO RAIN OR MOISTURE. CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
PRECAUTIONS Do not place the unit on the furniture that is capable of being tilted by a child and an adult leaning, pulling, standing or climbing on it. A falling unit can cause serious injury or even death. 1. Recording Copyright—Unless it’s for personal use only, recording copyrighted material is illegal without the permission of the copyright holder. 2. AC Fuse—The AC fuse inside the unit is not userserviceable. If you cannot turn on the unit, contact your Onkyo dealer. 3.
PRECAUTIONS • Do not use this unit when there’s the possibility of moisture condensation occurring. Doing so may damage your discs and certain parts inside this unit. If condensation does occur, remove all discs and leave this unit turned on for two to three hours. By this time, the unit will have warmed up and any condensation will have evaporated. 12.
PRECAUTIONS Supplied Accessories remote control with AA (1 5V) battery x 2 RCA audio / video cables AC cord instruction manual quick start guide Instruction Manual IR signal check • If the remote control is not working properly, you can use a digital camera (including a cellular phone with built-in camera) to see if it is sending out an infrared signal. With a digital camera (including built-in cell phone cameras): Point a digital camera towards the remote control.
PRECAUTIONS Trademark Information HDMI, the HDMI logo and High-Definition Multimedia Interface are trademarks or registered trademarks of HDMI Licensing LLC. Manufactured under license from Dolby Laboratories. Dolby and the double-D symbol are trademarks of Dolby Laboratories. “AVCHD” and the “AVCHD” logo are trademarks of Panasonic Corporation and Sony Corporation. “BONUSVIEW” is trademark of Blu-ray Disc Association. “BD-LIVE” logo is trademark of Blu-ray Disc Association.
CONTENTS Introduction Function Setup PRECAUTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 FEATURES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8 Symbols Used in this Manual . . . . . . . . . . . . . . . . . . . . . . . .8 FUNCTIONAL OVERVIEW . . . . . . . . . . . . . . . . . . . . . . . . . 9 Front Panel . . . . . . . . . . . . . . . . . . . . .
FEATURES Features Full high-definition video playback Watch movies in the highest picture quality available for your HDTV. This unit offers full high-definition video playback up to 1080p resolution for an amazing viewing experience. A highly detailed picture and increased sharpness delivers a more true-to-life picture. Upconvert DVD for enhanced picture quality Your current DVD will look even better than before thanks to video upconversion.
FUNCTIONAL OVERVIEW Front Panel 1 2 34 56 7 8 9* 10 11 12 13* 14 ON STANDBY CD BD DVD STANDBY SD CARD BLU-RAY DISC PLAYER BD SP807 * The unit can also be turned on by pressing these buttons. 7. Disc tray y ON/STANDBY button 1. I /y • Place a disc when opening the disc tray. • Press to turn on the unit, or to turn the unit into the standby mode. (To completely shut down the unit, 8. Display you must unplug the AC power cord) • Refer to “Front Panel Display” on page 12. 2. STANDBY indicator 9.
FUNCTIONAL OVERVIEW Remote Control 1 14 2 15* 16 3 17 4 18 19 20 5 11* 6 21 7 22 8 23 9 24 10 25 12 27 13 28 26 730 * The unit can also be turned on by pressing these buttons. 1. DISPLAY button • Press to display the on-screen display menu. 2. ON/STANDBY I /y y button • Press to turn on the unit, or to turn the unit into the standby mode. (To completely shut down the unit, you must unplug the AC power cord) 3.
FUNCTIONAL OVERVIEW Installing the Batteries in the Remote Control Install 2 AA (1.5V) batteries matching the polarity indicated inside battery compartment of the remote control. 1 Open the cover. 2 Insert batteries. Using a Remote Control Keep in mind the following when using the remote control: • Make sure that there are no obstacles between the remote control and the infrared sensor window on the unit.
FUNCTIONAL OVERVIEW Front Panel Display 1 2 • Brightness of the display can be adjusted. Refer to “Panel Display” in “FUNCTION SETUP” on page 43. 1. Displays playback status icon. Refer to the table below. 2. Displays various kinds of information such as title number, elapsed time, repeat mode, etc.
CONNECTIONS Connection to the TV • Make one of the following connections, depending on the capabilities of your existing device.
CONNECTIONS HDMI Output Mode and Actual Output Signals Press [RESOLUTION] to change the resolution of the video signal being output from HDMI OUT jack. The video resolution changes as follows every time [RESOLUTION] is pressed.
CONNECTIONS Device to be connected HDMI connection to a TV and digital audio connection (optical/coaxial) to an AV receiver “HDMI Audio Out” setting Audio Mute Output HDMI audio signal HDMI audio will be mute, and Dolby Digital / DTS bitstream or LPCM will be output from AUDIO OUTPUT (DIGITAL OPTICAL / COAXIAL) jacks depending on “Digital Out” setting. Refer to page 39.
CONNECTIONS Connection to an Audio System • When you change the connections, all devices should be turned off. • Refer to the manual accompanying external devices for more information.
CONNECTIONS ■ Audio signals output from AUDIO OUTPUT (DIGITAL OPTICAL / COAXIAL) jacks For the settings in the “Digital Out” to take effect, “HDMI Audio Out” should be set to “Audio Mute”. Otherwise, the settings made in the “HDMI Audio Out” will have a priority, and the same signal as being output from the HDMI OUT jack will be output from the AUDIO OUTPUT (DIGITAL OPTICAL / COAXIAL) jacks as well.
CONNECTIONS Network Connection with LAN • You can use a disc which offers BD-Live function by connecting the unit to the Internet. (For BD-Live information, please refer to page 29) Telecommunications equipment (modem, etc.) Hub or broadband router LAN 1 this unit 2 3 WAN 4 LAN 5 LAN cable LAN cable Internet Make sure to connect the telecommunications equipment (modem, etc.) to the ETHERNET terminal via Hub or broadband router.
INFORMATION ON PLAYBACK Before you start playing back a disc, read the following information. Readable cards Playable Discs and Files This unit is compatible to play back the following discs / files. To play back a disc / file, make sure that it meets the requirements for region codes and color systems as described below. You can play back discs that have the following logos. Other disc types are not guaranteed to play back. Playable discs Blu-ray Disc - BD-video (single / dual layer) - BD-RE* (ver. 2.
INFORMATION ON PLAYBACK On-Screen Display Color Systems BD-video and DVD-video are recorded in different color systems throughout the world. The most common color system is NTSC (which is used primarily in the United States and Canada). This unit employs NTSC color system, so the disc you play back must be recorded in the NTSC system. You cannot play back the disc recorded in other color systems. You can check information about the current disc by pressing [DISPLAY].
INFORMATION ON PLAYBACK ■ Chapter information ■ HDMI information
1 2 1 1 / 10 3 4 5 B T 3 2 6 3/5 0 : 01 : 02 Video Info : Audio Info : Max Channel : B 1 Current title number 2 Current chapter number / Total number of chapters 3 Current repeat setting (Only when repeat setting is active) (C: Chapter repeat, T: Title repeat, AB : A-B repeat) 4 Indicates that the multi camera angle images are available on the sceneBASIC PLAYBACK Playing Back a BD, DVD or a Disc with AVCHD files BD-V DVD-V AVCHD 1 2 Press [ON /STANDBY I /y]. 3 4 Press [OPEN / CLOSE A ] to open the disc tray. Turn on the TV and select the appropriate input on the TV to which the unit is connected. Place the disc on the disc tray with its label side facing up. Align the disc to the disc tray guide. 5 Press [OPEN / CLOSE A ] to close the disc tray. It may take a while to load the disc. 730 6 Playback may start sutomatically.
BASIC PLAYBACK Operations Using Title Menu, Disc Menu, and Pop-up Menu BD-V DVD-V AVCHD Many of BD-video and DVD-video disc contains title menu (BD-video / DVD-video / AVCHD), disc menu (DVD-video) or pop-up menu (BD-video) which guides you through the available functions in the disc. The contents of the menus may differ depending on the discs. Pause 1 During playback, press [PAUSE F ]. • Playback will be paused. 2 Press [PLAY B ] to return to normal playback.
BASIC PLAYBACK Playing Back an Audio CD or a Disc with MP3 and JPEG files CD 1 2 3 MP3 JPEG Insert an audio CD or a disc with MP3 and JPEG files. • Media filter screen will appear. • For audio CD and a disc contains only one type of file, skip to step 3. To return to the first item: • Press [TOP MENU]. To return to the track/file played last: • Press [POP UP MENU / MENU].
BASIC PLAYBACK Inserting the SD Memory Card and Playback Reading the SD Memory Card AVCHD MP3 JPEG You can play back the AVCHD, MP3 and JPEG files in an SD Memory Card. With the SD Memory Card, you can also enjoy the special additional contents for BD-ROM ver. 2 (Profile 2.0/Profile 1.1) which can be downloaded from the Internet. You can store the contents on an SD Memory Card via computer and play them back with the BD-video.
SPECIAL PLAYBACK Step by Step Playback Note • The “Media Select” screen will disappear under the • • • • • conditions listed below: - when [RETURN] is pressed. - when the setup menu is called up. Do not remove the card during its playback. This unit supports SD Memory Card with FAT12 / FAT16 file system, and SDHC Memory Card with FAT32 file system. Do not delete the folders or files in the SD Memory Card with your computer. This unit might not read the SD Memory Card.
SPECIAL PLAYBACK A-B Repeat DVD-V BD-V AVCHD Program Playback CD You can play back the specific part (between point A and point B) repeatedly. 1 2 During playback, press [A-B] at the desired starting point A. During playback, press [A-B] at the desired ending point B. CD JPEG MP3 You can play back the disc in your desired order. 1 In stop mode, press [MODE]. • The program screen will appear. 2 Use [K / L] to select a track / file, then press [ENTER].
SPECIAL PLAYBACK Random Playback Note • During program playback, press [STOP C ] once to • • • • • • • set the resume point, and then press [PLAY B ] to resume program playback from where [STOP C ] was pressed (audio CD) or from beginning of the file where [STOP C ] was pressed (MP3 or JPEG). During program playback, press [STOP C ]. To go back to the normal program playback, press [RETURN] to exit from the program screen, then press [PLAY B ].
SPECIAL PLAYBACK Rapid Playback DVD-V BD-V Enjoying BD-Live Discs with Internet AVCHD BD-V This function plays back approximately at 1.3 times the normal playback while keeping the sound output. This function is available only on discs recorded in the Dolby Digital format. 1 During playback, press [MODE] repeatedly until the Rapid playback setting appears. Off 2 3 Press [ENTER] or [s / B] to switch or off. (x1.
SEARCH Using [SKIP H / G ] 1 Using [the Number buttons] (Direct Search) During playback, press [SKIP G] to move to the next track. Press it repeatedly to skip to subsequent tracks. Press [SKIP H ] once to go back to the beginning of the current track. Press it repeatedly to go to the previous tracks. Note • For BD and DVD, if title contains no chapters, [SKIP H / G ] changes the title. Title Search 1 In stop mode, enter the title number you want to search using [the Number buttons].
SPECIAL SETTINGS You can select the format of audio and video as you prefer depending on the contents of the disc you are playing back. Switching Subtitles Switching Audio Soundtrack Some BD and DVD may have subtitles in 1 or more languages. For commercially available discs, the supported languages can be found on the disc case. Follow the steps below to switch the subtitle languages during playback.
SPECIAL SETTINGS Setting the BD Audio Mode BD-V There are 2 ways to set “BD Audio Mode” setting; whether to output the secondary and interactive audio accompanied by the primary audio or only the primary audio. Depending on the setting of the mode, Dolby Digital, Dolby Digital Plus, Dolby TrueHD, DTS, or DTS-HD output changes between multi LPCM and bitstream. 1 2 In stop mode with BD inserted, press [MODE]. Use [K / L] to select your desired setting.
FUNCTION SETUP Using the Setup Menu In the setup menu you can change the setting for audio, video, language, etc. You cannot change the setting during playback. Setting items displayed in gray indicates they are not available under the conditions at the time. Quick “Quick” menu contains setting items extracted from “Custom” menu which may be used frequently. 1 In stop mode, press [SETUP]. 2 Use [K / L] to select [ENTER]. 3 Use [K / L] to select your desired setting items.
FUNCTION SETUP Custom “Custom” menu contains all the setting items. 1 2 3 In stop mode, press [SETUP]. Use [K / L] to select [ENTER]. , then press Use [K / L] to select your desired setting category, then press [ENTER]. : Language : Video : Audio : Parental : Others • For “Parental” menu, follow the procedure on page 42. 730 4 Use [K / L] to select your desired setting items. 5 Follow the procedure below depending on the setting items.
FUNCTION SETUP ■ Language Language Audio Original Subtitle Off Disc Menu English Player Menu English • For how to select the setting items and options, refer to “Custom” on page 34. Setting items Audio Sets the language for audio. Subtitle Sets the language for subtitle. Disc Menu Sets the language for disc menu or pop-up menu. Player Menu Sets the language for OSD (on-screen display).
FUNCTION SETUP ■ Video Video TV Aspect 16:9 Wide HDMI Select YCbCr HDMI RGB Setting Normal HDMI Auto Format Max HDMI Video Resolution Auto HDMI Deep Color Auto Component Output 480i • For how to select the setting items and options, refer to “Custom” on page 34. Setting items TV Aspect Sets the picture size according to aspect ratio of the connected TV. Options 16:9 Wide*: Select this when a wide-screen TV is connected.
FUNCTION SETUP Setting items Options Auto1*: Sets the optimum progressive mode The progressive mode will be selected automatically depending on the material type (film or video). for the image material output from Auto2: HDMI OUT jack and VIDEO OUTPUT (COMPONENT) jacks. Suited for 30-frame progressive video material such as flash animation created Depending on the video material, image on PC. quality may get degraded due to the Video: wrong Progressive Mode setting.
FUNCTION SETUP ■ Audio Audio BD Audio Mode HD Audio Output HDMI Audio Out HDMI Multi (Norma ) 7.1ch Audio Out Multi Channel Down Sampling Off DRC Auto • For how to select the setting items and options, refer to “Custom” on page 34. Setting items BD Audio Mode For BD, selects whether to output the secondary and interactive audio with primary audio if it is available or only the primary audio. Refer to “Setting the BD Audio Mode” on page 32.
FUNCTION SETUP ■ Digital out setting When “Audio Mute” is selected in “HDMI Audio Out” setting, HDMI audio signal will be muted and the audio signals output from AUDIO OUTPUT (DIGITAL OPTICAL / COAXIAL) jacks change depending on “Digital Out” setting. Quick HDMI Audio Out Audio Mute Digital Out Bitstream*: When playing back discs recorded in Dolby Digital, Dolby Digital Plus, Dolby TrueHD, DTS or DTS-HD, the corresponding core stream (Dolby Digital or DTS) are output.
FUNCTION SETUP How to navigate through “HDMI Multi(LPCM)” and "Multi Channel" setting. 1 2 Use [K / L] to select your desired menu item then press [ENTER]. Use [K / L] to select your setting items. • Press [RETURN] to go back to the previous screen. 3 Use [s / B] to select desired options. (Except for “Test Tone”, “Default” and setting options in “Speaker Size” setting.) For setting options in “Speaker Size” setting: Press [ENTER] to select desired options.
FUNCTION SETUP Menu Delay Time This is a parameter for optimizing the timing at which the sound is output from the speakers according to their distance from the listening position. Setting items Distance Options Feet* Meters Front 0ft to 60ft (12ft*) (0m to 18m (3.6m*)) 0ft to 60ft (12ft*) (0m to 18m (3.6m*)) 0ft to 60ft (10ft*) (0m to 18m (3.0m*)) 0ft to 60ft (10ft*) (0m to 18m (3.0m*)) Center Surround Surround Back Default Descriptions Set the desired measure system.
FUNCTION SETUP ■ Parental Ratings control allows you to set a limit, which prevents your children from viewing inappropriate materials. Playback will be stopped if the ratings exceed the levels you set, and it will require you to enter a password before playing back the disc. Parental BD Rating Level All DVD Rating Level All Password Change 1 2 Use [K / L] to select , then press [ENTER]. Use [the Number buttons] to enter your 4-digit password.
FUNCTION SETUP ■ Others Others Angle Icon On Auto Power Off On Panel Display Auto Slide Show 5sec HDMI CEC On Media Select Disc Network Connection Enable(Easy) • For how to select the setting items and options, refer to “Custom” on page 34. Setting items Angle Icon Auto Power Off Panel Display Sets the brightness of the front panel display. Options On*: The angle icon appears on the TV screen when playing back the scene with various angle. Off: The angle icon disappears on the TV screen.
FUNCTION SETUP Setting items Network Connection Options Enable (Custom) DNS Setting Proxy Setting Set the DNS setting. Auto(DHCP)* Manual Primary DNS In most cases, you can connect to the Internet without making any Secondary changes to the default setting. DNS Do Not Use* Use Proxy Address Proxy Port Connection Auto* Speed 10BASE Half 10BASE Full 100BASE Half Set the proxy server. In most cases, you can connect to the Internet without using proxy server. Set the connection speed.
FUNCTION SETUP Enable(Easy) Network Connection Set up the network connection settings in order to use the BD-Live function with a BD-Live disc. Network settings are set to the following settings initially. (In most cases, you can connect to the Internet without making any changes to the default settings.
FUNCTION SETUP If you select “Manual”, follow the following instruction to set the IP address and DNS. 3-a) Use [K / L] to select “IP Address”, “Subnet Mask” or “Default Gateway”, then press [ENTER]. IP address setting screen will appear. Enter IP address, subnet mask and default gateway with cursor buttons and number buttons. 3-d) After you enter all correctly, press [ENTER]. • Confirmation message will appear. Select “Yes” to complete the settings.
FUNCTION SETUP 3-a) Use [K / L] to select “Proxy Address”, then press [ENTER]. Proxy address setting screen will appear. Enter proxy address. • The keyboard screen will appear. • Connection Speed You can set connection speed as your preference. (The default setting is “Auto”.) 1 Others 2 Proxy Address 3 1 2 3 4 5 a k u b c d l m n v w x Clear [K / L/ s / B] : [the Number buttons] : [ENTER] : [A] : [B] : [C] : [D] : 6 7 8 e f g h i j o p q r s t y z .
FUNCTION SETUP 5 Press [RETURN] to go back to the previous screen, or press [SETUP] to exit. Disable Deactivate all the network connection and settings. 1 2 3 Follow steps 1 to 4 in “Connection Test” on page 45. Use [K / L] to select “Disable”, then press [ENTER]. Press [RETURN] to go back to the previous screen, or press [SETUP] to exit. Note • The network connection can be reactivated by setting the network connection to “Enable(Easy)” or “Enable(Custom)”. 5 Disc tray will open automatically.
FUNCTION SETUP Initialize Initialize the setting or SD Memory Card. 1 2 3 In stop mode, press [SETUP]. Use [K / L] to select [ENTER]. , then press Use [K / L] to select a desired option, then press [ENTER]. • Conformation message will appear. “Setup”: Resets the setup menu to the default. The setting for “Parental”, “Network Connection”and “Media Select” will not be reset. “Format SD Card” (Available only when an SD Memory Card is inserted.): Initializes the SD Memory Card.
TROUBLESHOOTING If the unit does not perform properly when operated as instructed in this manual, check the unit, consulting the following checklist. Problem No power No sound or picture - Distorted picture - Solution Check if the AC cord is properly connected. Unplug the AC cord once, and wait for 5-10 seconds and then plug it in again. Check if the connected TV is turned on. Check if the connections are made securely and correctly. Check whether the connected TV or other device supports HDCP.
TROUBLESHOOTING Problem Angle does not switch Solution - The angle cannot be switched for BD / DVD which do not contain multiple angles. In some cases multiple angles are only recorded for specific scenes. - Check the settings in “Parental” menu. Playback does not start when the title is selected The password for rating level has - Enter the default password “4737”, then your forgotten password will be cleared.
GLOSSARY Analog Audio Dolby Digital An electrical signal that directly represents sound. Compare this to digital audio which can be an electrical signal, but is an indirect representation of sound. See also “Digital Audio”. The system to compress digital sound developed by Dolby Laboratories. It offers you sound of stereo (2ch) or multi-channel audio. Aspect Ratio Dolby Digital Plus is the next generation digital audio compression technology developed as an extension to Dolby Digital.
GLOSSARY PCM (Pulse Code Modulation) The most common system of encoding digital audio, found on CD and DAT. Excellent quality, but requires a lot of data compared to formats such as Dolby Digital and MPEG audio. For compatibility with digital audio recorders (CD, MD and DAT) and AV receivers with digital inputs, this unit can convert Dolby Digital and MPEG audio to PCM. See also “Digital Audio”.
LANGUAGE CODE Language A-B Abkhazian Afar Afrikaans Albanian Amharic Arabic Armenian Assamese Aymara Azerbaijani Bashkir Basque Bengali;Bangla Bhutani Bihari Bislama Breton Bulgarian [BUL] Burmese Byelorussian C-E Cambodian Catalan Chinese [CHI] Corsican Croatian Czech [CZE] Danish [DAN] Dutch [DUT] English [ENG] Esperanto Estonian F-H Faroese Fiji Finnish [FIN] Code 4748 4747 4752 6563 4759 4764 5471 4765 4771 4772 4847 5167 4860 5072 4854 4855 4864 4853 5971 4851 5759 4947 7254 4961 5464 4965 5047 6058 5
SPECIFICATIONS General Signal system Power requirements Power consumption Dimensions (width x height x depth) Weight Operating temperature Operating humidity NTSC color 120V AC, 60Hz 30W (standby: 0.6W) 17-1/8 x 4-1/4 x 12-5/16 inches (435 x 108 x 312mm) 11.0 lbs ( 5.
Sales & Product Planning Div. : 2-1, Nisshin-cho, Neyagawa-shi, OSAKA 572-8540, JAPAN Tel: 072-831-8023 Fax: 072-831-8163 ONKYO U.S.A. CORPORATION 18 Park Way, Upper Saddle River, N.J. 07458, U.S.A. Tel: 201-785-2600 Fax: 201-785-2650 http://www.us.onkyo.com/ ONKYO EUROPE ELECTRONICS GmbH Liegnitzerstrasse 6, 82194 Groebenzell, GERMANY Tel: +49-8142-4401-0 Fax: +49-8142-4401-555 http://www.eu.onkyo.