Owner's Manual

First Time Setup

—Continued

Use the Down [ ] button to

select “Surround,” and then use

the Left and Right [ ]/[ ] but-

tons to select

Small

Large

, or

None

Small:

Select if the surround speak-

ers are small.

Large:

Select if the surround speak-

ers are large.

None:

Select if no surround speakers

are connected.

Note:

• If the Front setting in step 4 is set to

Small, the Large option cannot be

selected.

Press the [SETUP] button.

Setup closes.

TESTING THE SPEAKERS

To test that all of the speakers are working properly,

press the remote controller’s [TEST TONE] but-

ton. The test tone will be output by each speaker in

turn and the name of each speaker will appear on the

display. To turn off the test tone, press the [TEST

TONE] button again.

• If the test tone is not produced by a speaker, or it’s

produced by a speaker other than that shown on

the display, you may have wired the speakers

incorrectly and you should check your connec-

tions (see page 18).

• If the test tone is not produced by a speaker and its

name does not appear on the display, you may

have set the speaker settings incorrectly (see

page 34).

HT-S580_En.book Page 35 Monday, February 21, 2005 1:40 PM